TOSHBA TA8025P/F Pin Description Description put pin for a signal from sensor. REF VTH setting pin. The VTH value can be set according to divide the input signal with resist C This pin hold the peak value for input signal of REF pin AG Grounded pin for REF. The output is an NPn open-collector output and the input signal which is made When the output goes down, it has a slope of 1V /us in order to lose the influence for the input N C Not connected.(Electrically, this pin is completely open. Power supply pin Timing Chart Tdelay2 Note: See Electrical Characteristics for symbols in the timing chart 2002-02-2TA8025P/F 3 2002-02-27 Pin Description Pin No. Symbol Description 1 IN Input pin for a signal from sensor. 2 REF VTH setting pin. The VTH value can be set according to divide the input signal with resistors. 3 CT This pin hold the peak value for input signal of REF pin. 4 GND Grounded. 5 A.G Grounded pin for REF. 6 OUT The output is an NPN open-collector output and the input signal which is made waveform-shaping is gone out. When the output goes down, it has a slope of 1V /µs in order to lose the influence for the input signal. 7 N.C Not connected. (Electrically, this pin is completely open.) 8 VCC Power supply pin. Timing Chart Note : See Electrical Characteristics for symbols in the timing chart