寇明银等:高温熔盐体系惰性阳极与月壤电解制氧技术 1627 中南大学出版社,2012) 09)[2021-11-29].https://www.osti.gov/biblio/11093 [5]Zhang T A,Zhu W X,Lu G Z.Aluminum Metallurgy Technology [19]Shi Z N,Xu JL,Qiu Z X,et al.Copper-nickel superalloys as inert Beijing:Science Press,2014 alloy anodes for aluminum electrolysis.JOM,2003,55(11):63 (张廷安,朱旺喜,吕国志.铝冶金技术.北京:科学出版社, [20]Yu X J.Progress in Aluminum Metallurgy.Shenyang 2014) Northeastern University Press,2001 [6]Ramsey D E,Grindstaff L I.Electrode Composition:US Patent, (于先进.铝治金进展.沈阳:东北大学出版社,2001) 4233148.1980-11-11 [21]Cao Z Q,Niu Y,Wu W T,et al.Effect of grain size on high [7]Popescu A M,Constantin V.Current efficiency,corrosion and temperature oxidation behavior of Cu-60Ni alloys.Corrsion Sci structural changes in SnO,-Sb2O-Cuo inert anodes for Technol Prot,2000,13(2):363 aluminium electrolysis.Chin./Chem Phys,2014,27(3):368 (曹中秋,牛焱,吴维岁,等.晶粒尺寸对Cu-6ONi合金的高温氧 [8]Gao Q.Study on the Preparation and Electrolysis of 化行为影响.腐蚀科学与防护技术,2000,13(2):363) Cu-Ni-NiFe,O Inert Anode under Low Oxygen Partial Pressure [22]Zhao Z L,Niu Y.The air oxidation of Cu-15Ni-15Ag alloy at [Dissertation].Shenyang:Northeastern University,2015 600-700 C.Corrsion Sci Technol Prot,2001,13(4):187 (高权.低氧分压下Cu-Ni-NiFe,O惰性阳极的制备与电解研究 (赵泽良,牛焱.Cu-15Ni-15Ag合金在600-700℃空气中的氧化. [学位论文].沈阳:东北大学,2015) 腐蚀科学与防护技术,2001,13(4):187) [9]Augustin C O,Srinivasan L K,Srinivasan K S.Inert anodes for [23]Cao Z Q,Niu Y,Wu W T.Oxidation of Cu-Cr-Ni alloys under environmentally clean production of aluminium-Part I.Bulletin 0.1 MPa pure Oz at 800C.Acta Mer Sin,2000,36(6):647 Electrochem,1993,9(&-10:502 (曹中秋,牛焱,吴维岁.Cu-Cr-Ni合金800C,0.1MPa纯氧气中 [10]Ray S P.Inert Electrode United Compositions:US Patent, 的氧化.金属学报,2000,36(6):647) 4374050.1983-2-15 [24]Zeng C L,Wang W,Wu W T.A study of the corrosion of Fe-Cr [11]Xi J H,Yao G C,Liu Y H.The effects of presintering temperature alloys in molten (Li-K)CO:at 650 C.Acta Mer Sin,2000.36(6): on microstructure and properties of inert anodes of NiFe2O spinel 651 with additives TiO2,MnO2.Mater Rev,2005,19(10):133 (曾潮流,王文,吴维芝.Fe-Cr合金在650℃熔盐(Li-K)2C03中 (席锦会,姚广春,刘宜汉.预烧温度对掺杂TiO2、MO,的镍铁 的腐蚀行为.金属学报,2000,36(6):651) 尖品石惰性阳极微观形貌和性能的彩响.材料导报,2005, [25]Sekhar J A,Liu J J,Duruz J J.Stable Anodes for Aluminium 19(10):133) Production Cells:US Patent,5510008,1996-4-23 [12]Xi J H,Xie Y J,Yao G C,et al.Effect of additive on corrosion [26]Duruz J J,Nora V.Grade non-consumable anode materials /Light resistance of NiFe,O ceramics as inert anodes.Trans Nonferrous Metals.Warrendale,1997:324 Met Soc China,2008,18(2):356 [27]Duruz J J,Nora V,Crottaz O.Cells for the Electrowinning of [13]Wang H,Zhou K C,Li Z Y.Microstructure and electrical Aluminium Having Dimensionally Stable Metal-Based Anodes:US properties of Nb2Os-doping NiFe,O ceramic.Chin J Nonferrous Patent,,6913682,2005-7-5 Mer,2013,23(2):410 [28]Haugsrud R.On the influence of non-protective Cuo on high- (王吴,周科朝,李志友.Nb2O掺杂NFe2O,陶瓷材料的显微结 temperature oxidation of Cu-rich Cu-Ni based alloys.Oxid Met, 构和导电性能.中国有色金凤学报,2013,23(2):410) 1999,52(5-6):427 [14]Gregg JS,Frederick MS,King HL,et al.Testing of cerium oxide [29]Thinh N,Vittorio B,Curtis M,et al.Non-carbon anodes and coated cermet anodes in a laboratory cell /Essent Read Light Met, cathode coatings for aluminium production.JOM,2004,56(11): 2016:1094 231 [15]Gregg J S,Frederick M S.Vaccaro A J,et al.Pilot cell [30]Shi Z N.Xu J L.Qiu Z X,et al.Anti-oxidation and anti-corrosion demonstration of cerium oxide coated anodes /Light Metals, properties of Ni-Fe-Cu inert anodes.Chin J Nonferrous Met, 1993:465 2004,14(4):591 [16]Wu XX,Mao X H.Research on inert anode of aluminium (石忠宁,徐君莉,邱竹贤,等.Ni-Fe-Cu惰性阳极的抗氧化和耐 electrolysis.J Guizhou Univ Technol (Nat Sci Ed),1999,28(5): 蚀性能.中国有色金属学报,2004,14(4):591) 36 [31]Sekhar J A,Trivedi R.Solidification microstructure evolution in (吴贤熙,毛小浩.铝电解镍基惰性阳极的研究.贵州工业大学 the presence of inert particles.Mater Sci Eng:A4,1991,147(1):9 学报(自然科学版),1999,28(5):36) [32]Blinov V,Polyakov P.Thonstad J.Behaviour of cermet inert [17]Dewing E W,Rolseth S,Stoen L,et al.The solubility of ZnO and anodes for aluminium electrolysis in a low temperature electrolyte ZnAlO in cryolite melts.Metall Mater Trans B,1997,28(6): I/Eleventh International Aluminium Symposium.Norway,2001: 1099 123 [18]Hym J N.A dynamic metal anode [J/OL].OSTI Online (1998-11- [33]Lorentsen O A,Thonstad J.Electrolysis and post-testing of inert中南大学出版社, 2012) Zhang T A, Zhu W X, Lü G Z. Aluminum Metallurgy Technology. Beijing: Science Press, 2014 ( 张廷安, 朱旺喜, 吕国志. 铝冶金技术. 北京: 科学出版社, 2014) [5] Ramsey D E, Grindstaff L I. Electrode Composition: US Patent, 4233148. 1980-11-11 [6] Popescu A M, Constantin V. Current efficiency, corrosion and structural changes in SnO2–Sb2O3–CuO inert anodes for aluminium electrolysis. Chin J Chem Phys, 2014, 27(3): 368 [7] Gao Q. Study on the Preparation and Electrolysis of Cu–Ni–NiFe2O4 Inert Anode under Low Oxygen Partial Pressure [Dissertation]. Shenyang: Northeastern University, 2015 ( 高权. 低氧分压下Cu–Ni–NiFe2O4惰性阳极的制备与电解研究 [学位论文]. 沈阳: 东北大学, 2015) [8] Augustin C O, Srinivasan L K, Srinivasan K S. Inert anodes for environmentally clean production of aluminium—Part I. Bulletin Electrochem, 1993, 9(8-10): 502 [9] Ray S P. Inert Electrode United Compositions: US Patent, 4374050. 1983-2-15 [10] Xi J H, Yao G C, Liu Y H. The effects of presintering temperature on microstructure and properties of inert anodes of NiFe2O4 spinel with additives TiO2 , MnO2 . Mater Rev, 2005, 19(10): 133 (席锦会, 姚广春, 刘宜汉. 预烧温度对掺杂TiO2、MnO2的镍铁 尖晶石惰性阳极微观形貌和性能的影响. 材料导报, 2005, 19(10):133) [11] Xi J H, Xie Y J, Yao G C, et al. Effect of additive on corrosion resistance of NiFe2O4 ceramics as inert anodes. Trans Nonferrous Met Soc China, 2008, 18(2): 356 [12] Wang H, Zhou K C, Li Z Y. Microstructure and electrical properties of Nb2O5 -doping NiFe2O4 ceramic. Chin J Nonferrous Met, 2013, 23(2): 410 (王昊, 周科朝, 李志友. Nb2O5掺杂NiFe2O4陶瓷材料的显微结 构和导电性能. 中国有色金属学报, 2013, 23(2):410) [13] Gregg J S, Frederick M S, King H L, et al. Testing of cerium oxide coated cermet anodes in a laboratory cell // Essent Read Light Met, 2016: 1094 [14] Gregg J S, Frederick M S, Vaccaro A J, et al. Pilot cell demonstration of cerium oxide coated anodes // Light Metals, 1993: 465 [15] Wu X X, Mao X H. Research on inert anode of aluminium electrolysis. J Guizhou Univ Technol (Nat Sci Ed), 1999, 28(5): 36 (吴贤熙, 毛小浩. 铝电解镍基惰性阳极的研究. 贵州工业大学 学报(自然科学版), 1999, 28(5):36) [16] Dewing E W, Rolseth S, Støen L, et al. The solubility of ZnO and ZnAl2O4 in cryolite melts. Metall Mater Trans B, 1997, 28(6): 1099 [17] [18] Hyrn J N. A dynamic metal anode [J/OL]. OSTI Online (1998-11- 09) [2021-11-29].https://www.osti.gov/biblio/11093 Shi Z N, Xu J L, Qiu Z X, et al. Copper-nickel superalloys as inert alloy anodes for aluminum electrolysis. JOM, 2003, 55(11): 63 [19] Yu X J. Progress in Aluminum Metallurgy. Shenyang: Northeastern University Press, 2001 ( 于先进. 铝冶金进展. 沈阳: 东北大学出版社, 2001) [20] Cao Z Q, Niu Y, Wu W T, et al. Effect of grain size on high temperature oxidation behavior of Cu–60Ni alloys. Corrsion Sci Technol Prot, 2000, 13(2): 363 (曹中秋, 牛焱, 吴维㞵, 等. 晶粒尺寸对Cu–60Ni合金的高温氧 化行为影响. 腐蚀科学与防护技术, 2000, 13(2):363) [21] Zhao Z L, Niu Y. The air oxidation of Cu–15Ni–15Ag alloy at 600–700 ℃. Corrsion Sci Technol Prot, 2001, 13(4): 187 (赵泽良, 牛焱. Cu–15Ni–15Ag合金在600~700 ℃空气中的氧化. 腐蚀科学与防护技术, 2001, 13(4):187) [22] Cao Z Q, Niu Y, Wu W T. Oxidation of Cu–Cr–Ni alloys under 0.1 MPa pure O2 at 800 °C. Acta Met Sin, 2000, 36(6): 647 (曹中秋, 牛焱, 吴维㞵. Cu–Cr–Ni合金800 °C, 0.1 MPa纯氧气中 的氧化. 金属学报, 2000, 36(6):647) [23] Zeng C L, Wang W, Wu W T. A study of the corrosion of Fe–Cr alloys in molten (Li–K)2CO3 at 650 ℃. Acta Met Sin, 2000, 36(6): 651 (曾潮流, 王文, 吴维㞵. Fe–Cr合金在650 ℃熔盐(Li–K)2CO3中 的腐蚀行为. 金属学报, 2000, 36(6):651) [24] Sekhar J A, Liu J J, Duruz J J. Stable Anodes for Aluminium Production Cells: US Patent, 5510008, 1996-4-23 [25] Duruz J J, Nora V. Grade non–consumable anode materials // Light Metals. Warrendale, 1997: 324 [26] Duruz J J, Nora V, Crottaz O. Cells for the Electrowinning of Aluminium Having Dimensionally Stable Metal-Based Anodes: US Patent, 6913682, 2005-7-5 [27] Haugsrud R. On the influence of non-protective CuO on hightemperature oxidation of Cu-rich Cu–Ni based alloys. Oxid Met, 1999, 52(5-6): 427 [28] Thinh N, Vittorio B, Curtis M, et al. Non–carbon anodes and cathode coatings for aluminium production. JOM, 2004, 56(11): 231 [29] Shi Z N, Xu J L, Qiu Z X, et al. Anti-oxidation and anti-corrosion properties of Ni–Fe–Cu inert anodes. Chin J Nonferrous Met, 2004, 14(4): 591 (石忠宁, 徐君莉, 邱竹贤, 等. Ni–Fe–Cu惰性阳极的抗氧化和耐 蚀性能. 中国有色金属学报, 2004, 14(4):591) [30] Sekhar J A, Trivedi R. Solidification microstructure evolution in the presence of inert particles. Mater Sci Eng:A, 1991, 147(1): 9 [31] Blinov V, Polyakov P, Thonstad J. Behaviour of cermet inert anodes for aluminium electrolysis in a low temperature electrolyte // Eleventh International Aluminium Symposium. Norway, 2001: 123 [32] [33] Lorentsen O A, Thonstad J. Electrolysis and post– testing of inert 寇明银等: 高温熔盐体系惰性阳极与月壤电解制氧技术 · 1627 ·