568 工程科学学报，第43卷，第4期 continuous casting mould and solidification structure of 55SiCr. (杨小刚.低碳微合金钢铸坯角部横裂纹控制研究学位论文] Metall Res Technol,2018,115(1):103 北京：北京科技大学，2016) [9]Li J C,Wang B F,Ma Y L,et al.Effect of complex elec- [18]Cabrera-Marrero J M,Carreno-Galindo V,Morales R D,et al. tromagnetic stirring on inner quality of high carbon steel bloom Macro-micro modeling of the dendritic microstructure of steel Mater Sci EngA,2006,425(1-2):201 billets processed by continuous casting.ISI/Int,1998,38(8):812 [10]Bleck W,Wang W J,Bulte R.Influence of soft reduction on [19]Zhang H J.Numerical Simulation and Optimization on the intemal quality of high carbon steel billets.Steel Res Int,2006, Macrosegregation and Solidificatin Structure of Oil Casting Steel 77(7):485 [Dissertation].Beijing:University of Science and Technology [11]Wang W P,Liu L X,Li H,et al.High carbon stranded steel Beijing.2016 SWRH82B central carbon segregation control practice.Special (张海杰.石油套管钢连铸坯宏观偏析和低倍组织的模拟与优 Steel,2019,40(5):24 化学位论文].北京：北京科技大学，2016) (王文培，刘列喜，李海，等.高碳绞线钢SWRH82B中心碳偏析 [20]Dong QP.Numerical Sudy on the Porosiry and Macrosegregation 控制实线.特殊钢，2019,40(5)：24) in Continuously Cast Billet [Dissertation].Beijing:University of [12]Jiang D B.Wang WL.Luo S,et al.Numerical simulation of slab Science and Technology Beijing,2018 centerline segregation with mechanical reduction during (董其鹏.方坯连铸疏松及宏观偏析的模拟研究[学位论文]，北 continuous casting process.Int J Heat Mass Transfer,2018,122: 京：北京科技大学，2018) 315 [21]Wang X L.Study on Heat Transfer Behavior of High Speed [13]Wu M H,Ludwig A.A three-phase model for mixed columnar- Continuous Casting of Steel Slabs [Dissertation].Beijing: equiaxed solidification.Metall Mater Trans A,2006,37(5):1613 University of Science and Technology Beijing,2014 [14]Sun H B,Zhang J Q.Study on the macrosegregation behavior for (王晓连.高拉速板坯连铸传热行为研究学位论文].北京：北京 the bloom continuous casting:model development and validation. 科技大学，2014) Metall Mater Trans B,2014,45(3):1133 [22]Morales R D,Lopez A G,Olivares I M.Heat transfer analysis [15]Ma C W.Numerical Simulation on Centerline Segregation in during water spray cooling of steel rods.IS//Int,1990,30(1):48 Continuous Casting Process[Dissertation].Beijing:Tsinghua [23]Wang QQ.Zhang L F.Influence of FC-mold on the full University,2004 solidification of continuous casting slab.JOM,2016,68(8):2170 (马长文.连铸过程中心偏析的数值模拟研究学位论文]，北京 [24]Wang Y.Zhang L F,Zhang HJ,et al.Mechanism and control of 清华大学，2004) sulfide inclusion accumulation in CET zone of 37Mn5 round billet. [16]Chen H B.Investigations on Solute Redistribution during the Metall Mater Trans B,2017,48(2):1004 Solidification of Iron-based Multicomponent Alloys and Centerline [25]Choudhary S K,Ghosh A.Morphology and macrosegregation in Segregation in Contimous Casting Slab[Dissertation].Chongqing: continuously cast steel billets.ISI/Int,1994,34(4):338 Chongqing University,2018 [26]Chen H B,Long M J,Chen D F,et al.Numerical study on the (陈华标.铁基多元合金凝固溶质再分配与连铸板坯中心偏析 characteristics of solute distribution and the formation of centerline 研究[学位论文].重庆：重庆大学，2018) segregation in continuous casting (CC)slab.Int J Heat Mass [17]Yang X G.Control of Transverse Corner Cracks on Low Carbon 7T1sfer,2018,126:843 Micro-alloyed Continuous Casting Slabs[Dissertation].Beijing: [27]Maidorn C,Blind D.Solidification and segregation in heavy University of Science and Technology Beijing,2016 forging ingots.Nuc/Eng Des,1985,84(2):285continuous  casting  mould  and  solidification  structure  of  55SiCr. Metall Res Technol, 2018, 115（1）: 103 Li  J  C,  Wang  B  F,  Ma  Y  L,  et  al.  Effect  of  complex  elec￾tromagnetic  stirring  on  inner  quality  of  high  carbon  steel  bloom. Mater Sci Eng A, 2006, 425（1-2）: 201 [9] Bleck  W,  Wang  W  J,  Bulte  R.  Influence  of  soft  reduction  on internal  quality  of  high  carbon  steel  billets. Steel Res Int,  2006, 77（7）: 485 [10] Wang  W  P,  Liu  L  X,  Li  H,  et  al.  High  carbon  stranded  steel SWRH82B  central  carbon  segregation  control  practice. Special Steel, 2019, 40（5）: 24 （王文培, 刘列喜, 李海, 等. 高碳绞线钢SWRH82B中心碳偏析 控制实践. 特殊钢, 2019, 40（5）：24） [11] Jiang D B, Wang W L, Luo S, et al. Numerical simulation of slab centerline  segregation  with  mechanical  reduction  during continuous casting process. Int J Heat Mass Transfer, 2018, 122: 315 [12] Wu  M  H,  Ludwig  A.  A  three-phase  model  for  mixed  columnar￾equiaxed solidification. Metall Mater Trans A, 2006, 37（5）: 1613 [13] Sun H B, Zhang J Q. Study on the macrosegregation behavior for the bloom continuous casting: model development and validation. Metall Mater Trans B, 2014, 45（3）: 1133 [14] Ma  C  W. Numerical Simulation on Centerline Segregation in Continuous Casting Process[Dissertation].  Beijing:  Tsinghua University, 2004 （ 马长文. 连铸过程中心偏析的数值模拟研究[学位论文]. 北京: 清华大学, 2004） [15] Chen  H  B. Investigations on Solute Redistribution during the Solidification of Iron-based Multicomponent Alloys and Centerline Segregation in Continuous Casting Slab[Dissertation]. Chongqing: Chongqing University, 2018 （ 陈华标. 铁基多元合金凝固溶质再分配与连铸板坯中心偏析 研究[学位论文]. 重庆: 重庆大学, 2018） [16] Yang X G. Control of Transverse Corner Cracks on Low Carbon Micro-alloyed Continuous Casting Slabs[Dissertation].  Beijing: University of Science and Technology Beijing, 2016 [17] （ 杨小刚. 低碳微合金钢铸坯角部横裂纹控制研究[学位论文]. 北京: 北京科技大学, 2016） Cabrera-Marrero  J  M,  Carreno-Galindo  V,  Morales  R  D,  et  al. Macro-micro  modeling  of  the  dendritic  microstructure  of  steel billets processed by continuous casting. ISIJ Int, 1998, 38（8）: 812 [18] Zhang  H  J. Numerical Simulation and Optimization on the Macrosegregation and Solidificatin Structure of Oil Casting Steel [Dissertation].  Beijing:  University  of  Science  and  Technology Beijing, 2016 （ 张海杰. 石油套管钢连铸坯宏观偏析和低倍组织的模拟与优 化[学位论文]. 北京: 北京科技大学, 2016） [19] Dong Q P. Numerical Study on the Porosity and Macrosegregation in Continuously Cast Billet [Dissertation].  Beijing:  University  of Science and Technology Beijing, 2018 （ 董其鹏. 方坯连铸疏松及宏观偏析的模拟研究[学位论文]. 北 京: 北京科技大学, 2018） [20] Wang  X  L. Study on Heat Transfer Behavior of High Speed Continuous Casting of Steel Slabs [Dissertation].  Beijing: University of Science and Technology Beijing, 2014 （ 王晓连. 高拉速板坯连铸传热行为研究[学位论文]. 北京: 北京 科技大学, 2014） [21] Morales  R  D,  Lopez  A  G,  Olivares  I  M.  Heat  transfer  analysis during water spray cooling of steel rods. ISIJ Int, 1990, 30（1）: 48 [22] Wang  Q  Q,  Zhang  L  F.  Influence  of  FC-mold  on  the  full solidification of continuous casting slab. JOM, 2016, 68（8）: 2170 [23] Wang Y, Zhang L F, Zhang H J, et al. Mechanism and control of sulfide inclusion accumulation in CET zone of 37Mn5 round billet. Metall Mater Trans B, 2017, 48（2）: 1004 [24] Choudhary  S  K,  Ghosh  A.  Morphology  and  macrosegregation  in continuously cast steel billets. ISIJ Int, 1994, 34（4）: 338 [25] Chen  H  B,  Long  M  J,  Chen  D  F,  et  al.  Numerical  study  on  the characteristics of solute distribution and the formation of centerline segregation  in  continuous  casting  (CC)  slab. Int J Heat Mass Transfer, 2018, 126: 843 [26] Maidorn  C,  Blind  D.  Solidification  and  segregation  in  heavy forging ingots. Nucl Eng Des, 1985, 84（2）: 285 [27] · 568 · 工程科学学报，第 43 卷，第 4 期