吴宗河等：热轧7075/AZ31B复合板的显微组织及结合性能 627 temperature formability of Mg AZ31 by high speed friction stir [18]Chen Z J,Zeng Z,Huang G J,et al.Research on the Al/Mg/Al processing.Mater Des,2014,54:980 three-layer clad sheet fabricated by hot roll bonding technology. [9]Zhang T,Shao Y W,Meng G Z,et al.Corrosion of hot extrusion Rare Met Mater Eng,2011,40(Suppl 3):136 AZ91 magnesium alloy:I-relation between the microstructure and [19]Liu C Y,Wang Q,Jia Y Z,et al.Microstructures and mechanical corrosion behavior.Corros Sci,2011,53(5):1960 properties of Mg/Mg and Mg/Al/Mg laminated composites [10]Yan Y B,Zhang Z W,Shen W,et al.Microstructure and properties prepared via warm roll bonding.Mater Sci Eng 4,2012,556:1 of magnesium AZ31B -aluminum 7075 explosively welded [20]Yang X Y,Zhang Z L,Zhang L,et al.Influence of strain rate on composite plate.Mater Sci Eng 4,2010,527(9):2241 dynamic recrystallization behavior of AZ61 magnesium alloy [11]Zhang T T.Wang W X.Zhou J,et al.Molecular dynamics Trans Nonferrous Met Soc China,2011,21(8):1801 simulations and experimental investigations of atomic diffusion (杨续跃，张之岭，张雷，等.应变速率对AZ61镁合金动态再结品 behavior at bonding interface in an explosively welded Al/Mg 行为的影响.中国有色金属学报，2011,21(8)：1801) alloy composite plate.Acta Metall Sinica (English Lett),2017, [21]Maksoud I A,Ahmed H,Rodel J.Investigation of the effect of 30(10):983 strain rate and temperature on the deformability and microstructure [12]Zhang J,Chi C Z,Cui X L,et al.Microstructure and mechanical evolution of AZ31 magnesium alloy.Mater Sci Eng A,2009, properties of 5052/AZ31B/5052 three-layer composite sheet 504(1-2):40 prepared by hot pressing.Forging Stamping Technol,2018, [22]Santosh R,Das S K,Das G,et al.Three-dimensional 43(12):136 thermomechanical simulation and experimental validation on (张品，池成忠，崔晓磊，等.热压制备5052/AZ31B/5052三层复 failure of dissimilar material welds.Metall Mater Trans A,2016, 合板材的微观组织与力学性能.锻压技术，2018,43(12)：136) 47(7):3511 [13]Jafarian M,Rizi M S,Jafarian M,et al.Effect of thermal [23]Duan X J,Sheppard T.Simulation and control of microstructure tempering on microstructure and mechanical properties of Mg- evolution during hot extrusion of hard aluminium alloys.Mater Sci AZ31/Al-6061 diffusion bonding.Mater Sci Eng A,2016,666: EngA,2003,351(1-2):282 372 [14]Luo C,Liang W.LiX R,et al.Study on interface characteristics [24]Sauvage X,Dinda G P,Wilde G.Non-equilibrium intermixing and of Al/Mg/Al composite plates fabricated by two-pass hot rolling. phase transformation in severely deformed Al/Ni multilayers. Mater Sci Forum,2013,747:346 Scripta Ma1er,2007,56(3):181 [15]Zhang J J.Preparation of Al/Mg/Al Laminated Composite [25]Chung C Y,Zhu M,Man C H.Effect of mechanical alloying on Fabricated by Hot Rolled and Investigation of Microstructure and the solid state reaction processing of Ni-36.5 at.%Al alloy. Mechanical Properties[Dissertation].Taiyuan:Taiyuan University Intermetallics,2002,10(9):865 of Technology,2016 [26]Valiev R Z,Islamgaliev R K,Alexandrov I V.Bulk nanostructured (张建军.A/MgAI热轧复合板的制备及其微观组织和力学性能 materials from severe plastic deformation.Progr Mater Sci,2000 研究学位论文].太原：太原理工大学，2016) 45(2):103 [16]Zhang X P,Tan M J,Yang T H,et al.Bonding strength of [27]Sauvage X,Wetscher F,Pareige P.Mechanical alloying of Cu and Al/Mg/Al alloy tri-metallic laminates fabricated by hot rolling. Fe induced by severe plastic deformation of a Cu-Fe composite. Bull Mater Sci,2011,34(4):805 Acta Mater,2005,53(7):2127 [17]Zhang X P,Yang T H,Liu J Q,et al.Mechanical properties of an [28]Sato K,Yoshiie T,Satoh Y,et al.Simulation of vacancy migration Al/Mg/Al trilaminated composite fabricated by hot rolling./Mater energy in Cu under high strain.Mater Sci Eng 4,2003,350(1-2): Sci,2010,45(13):3457 220temperature  formability  of  Mg  AZ31  by  high  speed  friction  stir processing. Mater Des, 2014, 54: 980 Zhang T, Shao Y W, Meng G Z, et al. Corrosion of hot extrusion AZ91 magnesium alloy: I-relation between the microstructure and corrosion behavior. Corros Sci, 2011, 53（5）: 1960 [9] Yan Y B, Zhang Z W, Shen W, et al. Microstructure and properties of  magnesium  AZ31B –aluminum  7075  explosively  welded composite plate. Mater Sci Eng A, 2010, 527（9）: 2241 [10] Zhang  T  T,  Wang  W  X,  Zhou  J,  et  al.  Molecular  dynamics simulations  and  experimental  investigations  of  atomic  diffusion behavior  at  bonding  interface  in  an  explosively  welded  Al/Mg alloy  composite  plate. Acta Metall Sinica (English Lett),  2017, 30（10）: 983 [11] Zhang J, Chi C Z, Cui X L, et al. Microstructure and mechanical properties  of  5052/AZ31B/5052  three-layer  composite  sheet prepared  by  hot  pressing. Forging Stamping Technol,  2018, 43（12）: 136 （张晶, 池成忠, 崔晓磊, 等. 热压制备5052/AZ31B/5052三层复 合板材的微观组织与力学性能. 锻压技术, 2018, 43（12）：136） [12] Jafarian  M,  Rizi  M  S,  Jafarian  M,  et  al.  Effect  of  thermal tempering  on  microstructure  and  mechanical  properties  of  Mg￾AZ31/Al-6061  diffusion  bonding. Mater Sci Eng A,  2016,  666: 372 [13] Luo C Z, Liang W, Li X R, et al. Study on interface characteristics of  Al/Mg/Al  composite  plates  fabricated  by  two-pass  hot  rolling. Mater Sci Forum, 2013, 747: 346 [14] Zhang  J  J. Preparation of Al/Mg/Al Laminated Composite Fabricated by Hot Rolled and Investigation of Microstructure and Mechanical Properties[Dissertation]. Taiyuan: Taiyuan University of Technology, 2016 （张建军. Al/Mg/Al热轧复合板的制备及其微观组织和力学性能 研究[学位论文]. 太原: 太原理工大学, 2016） [15] Zhang  X  P,  Tan  M  J,  Yang  T  H,  et  al.  Bonding  strength  of Al/Mg/Al  alloy  tri-metallic  laminates  fabricated  by  hot  rolling. Bull Mater Sci, 2011, 34（4）: 805 [16] Zhang X P, Yang T H, Liu J Q, et al. Mechanical properties of an Al/Mg/Al trilaminated composite fabricated by hot rolling. J Mater Sci, 2010, 45（13）: 3457 [17] Chen  Z  J,  Zeng  Z,  Huang  G  J,  et  al.  Research  on  the  Al/Mg/Al three-layer  clad  sheet  fabricated  by  hot  roll  bonding  technology. Rare Met Mater Eng, 2011, 40（Suppl 3）: 136 [18] Liu C Y, Wang Q, Jia Y Z, et al. Microstructures and mechanical properties  of  Mg/Mg  and  Mg/Al/Mg  laminated  composites prepared via warm roll bonding. Mater Sci Eng A, 2012, 556: 1 [19] Yang X Y, Zhang Z L, Zhang L, et al. Influence of strain rate on dynamic  recrystallization  behavior  of  AZ61  magnesium  alloy. Trans Nonferrous Met Soc China, 2011, 21（8）: 1801 （杨续跃, 张之岭, 张雷, 等. 应变速率对AZ61镁合金动态再结晶 行为的影响. 中国有色金属学报, 2011, 21（8）：1801） [20] Maksoud  I  A,  Ahmed  H,  Rödel  J.  Investigation  of  the  effect  of strain rate and temperature on the deformability and microstructure evolution  of  AZ31  magnesium  alloy. Mater Sci Eng A,  2009, 504（1-2）: 40 [21] Santosh  R,  Das  S  K,  Das  G,  et  al.  Three-dimensional thermomechanical  simulation  and  experimental  validation  on failure of dissimilar material welds. Metall Mater Trans A, 2016, 47（7）: 3511 [22] Duan  X  J,  Sheppard  T.  Simulation  and  control  of  microstructure evolution during hot extrusion of hard aluminium alloys. Mater Sci Eng A, 2003, 351（1-2）: 282 [23] Sauvage X, Dinda G P, Wilde G. Non-equilibrium intermixing and phase  transformation  in  severely  deformed  Al/Ni  multilayers. Scripta Mater, 2007, 56（3）: 181 [24] Chung C Y, Zhu M, Man C H. Effect of mechanical alloying on the  solid  state  reaction  processing  of  Ni-36.5  at.% Al  alloy. Intermetallics, 2002, 10（9）: 865 [25] Valiev R Z, Islamgaliev R K, Alexandrov I V. Bulk nanostructured materials from severe plastic deformation. Progr Mater Sci, 2000, 45（2）: 103 [26] Sauvage X, Wetscher F, Pareige P. Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu –Fe composite. Acta Mater, 2005, 53（7）: 2127 [27] Sato K, Yoshiie T, Satoh Y, et al. Simulation of vacancy migration energy in Cu under high strain. Mater Sci Eng A, 2003, 350（1-2）: 220 [28] 吴宗河等： 热轧 7075/AZ31B 复合板的显微组织及结合性能 · 627 ·