2710 Journal of the American Ceramic Sociery-Cinibulk et al. Vol. 85. No. 11 SST. A. Parthasarathy, E. Boakye, M. K. Cinibulk, and M. D. Petry, "Fabrication "M. K. Cinibulk, J. R. Welch, and R S. Hay, " Transmission Electron Microscopy sites with Monazite and Hibonite as Specimen Preparation of Ceramic Coatings on Ceramic Fibers, Mater. Res. Soc. Interlayers,J. Am. Ceram Soc., 82 [12]3575-83(1999). roc,480,3-17(1997) Weibull Modulus of Ceramic Filamen Temn.S. Hay, E. Boakaye, and M. D. Petry, "Effects of Coating Deposition J.Am. Ceram.Soe,80102741-44(1997) (2000). IT. A. Parthasarathy ."Extraction of Weibull Parameters of Fiber Strength from V. A. Kramb, R, John, and L. P. Zawada, "Notched Fracture Behavior of an rd Deviations of Failure Loads and Fiber Diameters. J. Am. Oxide/Oxide Ceramic-Matrix Composite, " J. Am. Ceram. Soc.,82 [111 3087-96 K. Cinibulk, J.R. Welch, and R. S. Hay, "Preparation of Thin Sections of 2M. K. Cinibulk, K. A Keller, T, Mah, and T. A. Parthasarathy, "Nextel6 Coated Fibers for Characterization by Transmission Electron Microscopy, J.Am ber-Reinforced Alumini-YAG Porous Matrix Composites, Ceram. Eng. So Ceran.Soc,79[92481-84(1996 Poc,23[3629-36(2002)35T. A. Parthasarathy, E. Boakye, M. K. Cinibulk, and M. D. Petry, “Fabrication and Testing of Oxide/Oxide Microcomposites with Monazite and Hibonite as Interlayers,” J. Am. Ceram. Soc., 82 [12] 3575–83 (1999). 36M. D. Petry, T. Mah, and R. J. Kerans, “Validity of Using Average Diameter for Determination of Tensile Strength and Weibull Modulus of Ceramic Filaments,” J. Am. Ceram. Soc., 80 [10] 2741–44 (1997). 37T. A. Parthasarathy, “Extraction of Weibull Parameters of Fiber Strength from Means and Standard Deviations of Failure Loads and Fiber Diameters,” J. Am. Ceram. Soc., 84 [3] 588–92 (2001). 38M. K. Cinibulk, J. R. Welch, and R. S. Hay, “Preparation of Thin Sections of Coated Fibers for Characterization by Transmission Electron Microscopy,” J. Am. Ceram. Soc., 79 [9] 2481–84 (1996). 39M. K. Cinibulk, J. R. Welch, and R. S. Hay, “Transmission Electron Microscopy Specimen Preparation of Ceramic Coatings on Ceramic Fibers,” Mater. Res. Soc. Symp. Proc., 480, 3–17 (1997). 40R. S. Hay, E. Boakaye, and M. D. Petry, “Effects of Coating Deposition Temperature on Monazite Coated Fiber,” J. Eur. Ceram. Soc., 20 [5] 589 –97 (2000). 41V. A. Kramb, R. John, and L. P. Zawada, “Notched Fracture Behavior of an Oxide/Oxide Ceramic-Matrix Composite,” J. Am. Ceram. Soc., 82 [11] 3087–96 (1999). 42M. K. Cinibulk, K. A. Keller, T. Mah, and T. A. Parthasarathy, “Nextel™ 610 Fiber-Reinforced Alumina-YAG Porous Matrix Composites,” Ceram. Eng. Sci. Proc., 23 [3] 629–36 (2002). 2710 Journal of the American Ceramic Society—Cinibulk et al. Vol. 85, No. 11