Auditor's Recommendations Look At: Look For. Use of guard rails Protection of vulnerable wall surfaces Maintenance and cleaning of guard rails Positioning not to inhibit process or production movement 1.6.7. Services must be sealed into any walls through which they pass e.g. electrical fittings, plumbing etc Where fabricated walls are used, services must be sealed onto them e.g. electrical fittings Auditor's Recommendations Look At Look For Services〔e. electric Entry point into factory complies with food safety and hygiene requirements water)provided into factory Suitable seals are provided and maintained through records and inspection 1.6.8. Where temporary walls are constructed, they must give adequate protection from contamination and they must not present a hazard to the process or the product Auditor's recommendations Look At. Look For: Location of temporary walls Compliance with product and process flows Compliance with Health Safety requirement and food hygiene requirement 1.6.9. All external-opening doors must be kept closed. Where frequent use makes this impractical then either automatic doors, rubber swing doors, plastic strip curtaining or air curtain should be provided to prevent bird and insect ingress Auditor's Recommendations. Look At: Look For Factory Plan and process Possible access into production areas by pests Ability for cross contamination routes to be formed Use of locked alarmed doors as appropriate Use of strip curtains, air curtains or rubber swing doors Appropriate cleaning and maintenance schedules and records 1.6. 10 All doors to production areas should be self-closing to maintain the necessary atmospheric conditions. They should be close fitting on all sides and the doorframes and corners must be given protection against damageAuditor’s Recommendations: Look At: Look For: Use of guard rails Protection of vulnerable wall surfaces Maintenance and cleaning of guard rails Positioning not to inhibit process or production movement 1.6.7. Services must be sealed into any walls through which they pass e.g. electrical fittings, plumbing etc.. Where fabricated walls are used, services must be sealed onto them e.g. electrical fittings Auditor’s Recommendations: Look At: Look For: Services (i.e. electric / water) provided into factory Entry point into factory complies with food safety and hygiene requirements Suitable seals are provided and maintained through records and inspection 1.6.8. Where temporary walls are constructed, they must give adequate protection from contamination and they must not present a hazard to the process or the product. Auditor’s Recommendations: Look At: Look For: Location of temporary walls Compliance with product and process flows Compliance with Health & Safety requirement and food hygiene requirement 1.6.9. All external-opening doors must be kept closed. Where frequent use makes this impractical then either automatic doors, rubber swing doors, plastic strip curtaining or air curtain should be provided to prevent bird and insect ingress Auditor’s Recommendations: Look At: Look For: Factory Plan and process flows Possible access into production areas by pests Ability for cross contamination routes to be formed Use of locked / alarmed doors as appropriate Use of strip curtains, air ciurtains or rubber swing doors Appropriate cleaning and maintenance schedules and records 1.6.10 All doors to production areas should be self-closing to maintain the necessary atmospheric conditions. They should be close fitting on all sides and the doorframes and corners must be given protection against damage