MIL-HDBK-17-2F Volume 2,Chapter 4 Carbon Fiber Composites DATA WERE SUBMITTED BEFORE THE ESTABLISHMENT OF DATA DOCUMENTATION REQUIREMENTS (JUNE 1989).ALL DOCUMENTATION PRESENTLY REQUIRED WAS NOT SUPPLIED FOR THIS MATERIAL. MATERIAL: HITEX 33 6k/E7K8 unidirectional tape Table 4.2.2(c) C/Ep 145-UT RESIN CONTENT: 34wt% COMP:DENSITY:1.58 g/cm3 HITEX 33/E7K8 FIBER VOLUME: 58% VOID CONTENT:0.39% Tension,2-axis PLY THICKNESS: 0.0058in. [90]20 75/A TEST METHOD: MODULUS CALCULATION: Screening ASTM D 3039-76 NORMALIZED BY: Not normalized Temperature (F) 75 Moisture Content(%)】 ambient Equilibrium at T.RH Source Code 20 Mean 6.90 Minimum 5.58 Maximum 8.07 c.V.(%) 11.2 B-value (1) Fu Distribution Weibull (ksi) C1 7.23 C2 10.9 No.Specimens 20 No.Batches 1 Data Class Screening Mean 1.25 Minimum 1.23 Maximum 1.27 E吃 C.V.(%) 0.977 (Msi) No.Specimens 20 No.Batches 1 Data Class Screening Mean No.Specimens 吃1 No.Batches Data Class Mean Minimum Maximum C.V.(%) B-value e Distribution (LE) C C2 No.Specimens No.Batches Data Class (1)Basis values are presented only for A and B data classes. 4-11MIL-HDBK-17-2F Volume 2, Chapter 4 Carbon Fiber Composites 4-11 ∗ DATA WERE SUBMITTED BEFORE THE ESTABLISHMENT OF DATA DOCUMENTATION REQUIREMENTS (JUNE 1989). ALL DOCUMENTATION PRESENTLY REQUIRED WAS NOT SUPPLIED FOR THIS MATERIAL. MATERIAL: HITEX 33 6k/E7K8 unidirectional tape Table 4.2.2(c) C/Ep 145-UT RESIN CONTENT: 34 wt% COMP: DENSITY: 1.58 g/cm3 HITEX 33/E7K8 FIBER VOLUME: 58 % VOID CONTENT: 0.39% Tension, 2-axis PLY THICKNESS: 0.0058 in. [90]20 75/A TEST METHOD: MODULUS CALCULATION: Screening ASTM D 3039-76 NORMALIZED BY: Not normalized Temperature (°F) 75 Moisture Content (%) ambient Equilibrium at T, RH Source Code 20 Mean 6.90 Minimum 5.58 Maximum 8.07 C.V.(%) 11.2 B-value (1) Ftu 2 Distribution Weibull (ksi) C1 7.23 C2 10.9 No. Specimens 20 No. Batches 1 Data Class Screening Mean 1.25 Minimum 1.23 Maximum 1.27 Et 2 C.V.(%) 0.977 (Msi) No. Specimens 20 No. Batches 1 Data Class Screening Mean No. Specimens ν 21 t No. Batches Data Class Mean Minimum Maximum C.V.(%) B-value ε 2 tu Distribution (µε) C1 C2 No. Specimens No. Batches Data Class (1) Basis values are presented only for A and B data classes