Working T13 Draft 1410D Volume 3 Revision 0 5 November 2001 Information Technology AT Attachment with Packet Interface-7 Volume 3 (ATA/ATAPI-7 V3) This is an internal working document of T13,a Technical Committee of Accredited Standards Committee NCITS.As such,this is not a completed standard and has not been approved.The contents may be modified by the T13 Technical Committee.This document is made available for review and comment only. Permission is granted to members of NCITS,its technical committees,and their associated task groups to reproduce this document for the purposes of NCITS standardization activities without further permission, provided this notice is included.All other rights are reserved.Any commercial or for-profit replication or republication is prohibited. T13 Technical Editor: Peter T.McLean Maxtor Corporation 2190 Miller Drive Longmont,CO 80501-6744 USA Tel:303-678-2149 Fax:303-682-4811 Email:pete_mclean@maxtor.com Reference number ANSI NCITS.**-xxoo Printed November,5,2001 3:22PMWorking T13 Draft 1410D Volume 3 Revision 0 5 November 2001 Information Technology - AT Attachment with Packet Interface – 7 Volume 3 (ATA/ATAPI-7 V3) This is an internal working document of T13, a Technical Committee of Accredited Standards Committee NCITS. As such, this is not a completed standard and has not been approved. The contents may be modified by the T13 Technical Committee. This document is made available for review and comment only. Permission is granted to members of NCITS, its technical committees, and their associated task groups to reproduce this document for the purposes of NCITS standardization activities without further permission, provided this notice is included. All other rights are reserved. Any commercial or for-profit replication or republication is prohibited. T13 Technical Editor: Peter T. McLean Maxtor Corporation 2190 Miller Drive Longmont, CO 80501-6744 USA Tel: 303-678-2149 Fax: 303-682-4811 Email: pete_mclean@maxtor.com Reference number ANSI NCITS.*** - xxxx Printed November, 5, 2001 3:22PM