B-B 斜导柱侧抽芯模具结构 Angle pin core-pulling I8 1顶针固定板 ejector-retainer plate; 2顶针垫板 ejector-support plate; 3齐缝销 straight pin;4顶针 ejector pin; 23 5后定位环 back locating ring; 3 24 6顶出底板 back ejector- support plate; 4 7顶柱 pillar;816.拉料杆 sprue puller pin 9顶套 ejector bush;10定位销 location pin; 11.螺钉 screw12.回程杆 return pin; 27 13导柱 guide pin;14导套 guide bush; 15动模垫板 moving mould support plate; 31302028 17型芯镶件 core insert;18,21.型腔镶件 cavity insert 19定位环 locating ring;20浇道套 sprue bush;22定模垫板 fixed mould support plate; 23斜滑块 slanted slide;24.斜柱 angle pin;25,31耐磨板 wear plate:36.压板 wedge plate; 27定模板 fixed mould plate;28滑动镶件 slide insert.29冷却水管 cooling pipe 30动模板 moving mould plate:32支撑块 spacer blockκ33.动模座板 moving mould clamping plate斜导柱侧抽芯模具结构 Angle pin core-pulling 1.顶针固定板 ejector-retainer plate; 2.顶针垫板 ejector-support plate; 3.齐缝销 straight pin; 4.顶针 ejector pin; 5.后定位环 back locating ring; 6.顶出底板 back ejector-support plate; 7.顶柱 pillar; 8,16.拉料杆 sprue puller pin; 9.顶套 ejector bush; 10.定位销 location pin; 11.螺钉 screw; 12.回程杆 return pin; 13.导柱 guide pin; 14.导套 guide bush; 15.动模垫板 moving mould support plate; 17.型芯镶件 core insert; 18,21.型腔镶件 cavity insert; 19.定位环 locating ring; 20.浇道套 sprue bush; 22.定模垫板 fixed mould support plate; 23.斜滑块 slanted slide; 24.斜导柱 angle pin; 25,31.耐磨板 wear plate;36.压板wedge plate; 27.定模板 fixed mould plate; 28.滑动镶件 slide insert;29.冷却水管 cooling pipe; 30.动模板moving mould plate;32.支撑块 spacer block;33.动模座板 moving mould clamping plate