潘明等：RH精炼过程中吹氧量对F钢洁净度的影响 853 北京科技大学学报，2005,27(4)：436) carbon steel.J Univ Sci Technol Beijing,2011,33(3):276 [9]Cui H,Yue F,Bao Y P,et al.Study on cleanliness of IF steel first (李崇巍，成国光，王新华，等.RH冶炼超低碳钢内部脱碳机理及 slab.Iron Steel,2010,45(3):38 控制工艺.北京科技大学学报，2011,33(3)：276) (崔衡，岳蜂，包燕平，等.F钢连铸头坯洁净度研究.钢铁，2010， [18]Park Y G,Yi K W.A new numerical model for predicting carbon 45(3):38) concentration during RH degassing treatment./S//Int,2003, [10]Deng X X.Wang X H,LiLP,et al.Effect of ladle change process 43(9):1403 on the surface cleanliness of IF steel continuous casting slabs. [19]Inoue S,Furuno Y,Usui T,et al.Acceleration of decarburization Univ Sci Technol Beijing,2014,36(7):880 in RH vacuum degassing process./SI//nt,1992,32(1):120 (邓小旋，王新华，李林平，等.交换钢包过程对F钢连铸板坯表 [20]Harashima K,Mizoguchi S,Matsuo M,et al.Rates of nitrogen and 层洁净度的影响.北京科技大学学报，2014,36(7)：880) carbon removal from liquid iron in low content region under [11]Zhang Q Y,Wang L T.Wang X H.Influence of casting speed reduced pressures.ISI/m,992,32(1):111 variation during unsteady continuous casting on non-metallic [21]Liu B S,Zhu G S,Li H X,et al.Decarburization rate of RH inclusions in IF steel slabs./SI/Int,2006,46(10):1421 refining for ultra low carbon steel.Int J Miner Metall Mater,2010. [12]Kumar A,Choudhary S K.Ajmani S K.Distribution of 17(1):22 macroinclusions across slab thickness.IS/Int.2012.52(12): [22]Doo WC,Kim D Y,Kang S C,et al.The morphology of Al-Ti-O 2305 complex oxide inclusions formed in an ultra low-carbon steel melt [13]Liu L.Development of process and equipment of RH vacuum during the RH process.Met Mater Int,2007,13(3):249 refinery technology.Iron Steel,2006,41(8):1 [23]Hasunuma J,Kurose Y,Hiwasa S,et al.Production of ultra-low (刘浏.RH真空精炼工艺与装备技术的发展.钢铁，2006,41(8)： carbon steel by K-BOP process at Kawasaki Steel /Steelmaking 1) Conference Proceedings.Detroit,1990:91 [14]Han C J,Ai L Q,Liu B S,et al.Decarburization mechanism of [24]Wang M,Bao Y P,Cui H,et al.The composition and morphology RH-MFB refining process.J Univ Sci Technol Beijing,2006, evolution of oxide inclusions in Ti-bearing ultra low-carbon steel 13(3):218 melt refined in the RH process.ISI,010,50(11):1606 [15]Yamaguchi K,Kishimoto Y,Sakuraya T,et al.Effect of refining [25]Zhang X Z.Principles of Transport Phenomena in Metallurgy. conditions for ultra low carbon steel on decarburization reaction in Beijing:Metallurgical Industry Press,1988 RH degasser.ISI/Int,1992,32(1):126 (张先棹.治金传输原理.北京：冶金工业出版社，1988) [16]Takahashi M,Matsumoto H,Saito T.Mechanism of [26]Zhong L C,Zeze M,Mukai K.Density of liquid IF steel decarburization in RH degasser./SI/Int,1995,35(12):1452 containing Ti.ISI/Int,2005,45(3):312 [17]Li C W,Cheng GG,Wang X H,et al.Internal decarburization [27]Wakoh M,Sano N.Behavior of alumina inclusions just after mechanism and control technology of RH treatment for ultra-low deoxidation.IS/J Int,2007,47(5):627北京科技大学学报, 2005, 27（4）：436） Cui H, Yue F, Bao Y P, et al. Study on cleanliness of IF steel first slab. Iron Steel, 2010, 45（3）: 38 （崔衡, 岳峰, 包燕平, 等. IF钢连铸头坯洁净度研究. 钢铁, 2010, 45（3）：38） [9] Deng X X, Wang X H, Li L P, et al. Effect of ladle change process on  the  surface  cleanliness  of  IF  steel  continuous  casting  slabs. J Univ Sci Technol Beijing, 2014, 36（7）: 880 （邓小旋, 王新华, 李林平, 等. 交换钢包过程对IF钢连铸板坯表 层洁净度的影响. 北京科技大学学报, 2014, 36（7）：880） [10] Zhang  Q  Y,  Wang  L  T,  Wang  X  H.  Influence  of  casting  speed variation  during  unsteady  continuous  casting  on  non-metallic inclusions in IF steel slabs. ISIJ Int, 2006, 46（10）: 1421 [11] Kumar  A,  Choudhary  S  K,  Ajmani  S  K.  Distribution  of macroinclusions  across  slab  thickness. ISIJ Int,  2012,  52（12）: 2305 [12] Liu  L.  Development  of  process  and  equipment  of  RH  vacuum refinery technology. Iron Steel, 2006, 41（8）: 1 （刘浏. RH真空精炼工艺与装备技术的发展. 钢铁, 2006, 41（8）： 1） [13] Han  C  J,  Ai  L  Q,  Liu  B  S,  et  al.  Decarburization  mechanism  of RH-MFB  refining  process. J Univ Sci Technol Beijing,  2006, 13（3）: 218 [14] Yamaguchi K, Kishimoto Y, Sakuraya T, et al. Effect of refining conditions for ultra low carbon steel on decarburization reaction in RH degasser. ISIJ Int, 1992, 32（1）: 126 [15] Takahashi  M,  Matsumoto  H,  Saito  T.  Mechanism  of decarburization in RH degasser. ISIJ Int, 1995, 35（12）: 1452 [16] Li  C  W,  Cheng  G  G,  Wang  X  H,  et  al.  Internal  decarburization mechanism and control technology of RH treatment for ultra-low [17] carbon steel. J Univ Sci Technol Beijing, 2011, 33（3）: 276 （李崇巍, 成国光, 王新华, 等. RH冶炼超低碳钢内部脱碳机理及 控制工艺. 北京科技大学学报, 2011, 33（3）：276） Park Y G, Yi K W. A new numerical model for predicting carbon concentration  during  RH  degassing  treatment. ISIJ Int,  2003, 43（9）: 1403 [18] Inoue S, Furuno Y, Usui T, et al. Acceleration of decarburization in RH vacuum degassing process. ISIJ Int, 1992, 32（1）: 120 [19] Harashima K, Mizoguchi S, Matsuo M, et al. Rates of nitrogen and carbon  removal  from  liquid  iron  in  low  content  region  under reduced pressures. ISIJ Int, 1992, 32（1）: 111 [20] Liu  B  S,  Zhu  G  S,  Li  H  X,  et  al.  Decarburization  rate  of  RH refining for ultra low carbon steel. Int J Miner Metall Mater, 2010, 17（1）: 22 [21] Doo W C, Kim D Y, Kang S C, et al. The morphology of Al−Ti−O complex oxide inclusions formed in an ultra low-carbon steel melt during the RH process. Met Mater Int, 2007, 13（3）: 249 [22] Hasunuma  J,  Kurose  Y,  Hiwasa  S,  et  al.  Production  of  ultra-low carbon steel by K-BOP process at Kawasaki Steel // Steelmaking Conference Proceedings. Detroit, 1990: 91 [23] Wang M, Bao Y P, Cui H, et al. The composition and morphology evolution of oxide inclusions in Ti-bearing ultra low-carbon steel melt refined in the RH process. ISIJ Int, 2010, 50（11）: 1606 [24] Zhang  X  Z. Principles of Transport Phenomena in Metallurgy. Beijing: Metallurgical Industry Press, 1988 （张先棹. 冶金传输原理. 北京: 冶金工业出版社, 1988） [25] Zhong  L  C,  Zeze  M,  Mukai  K.  Density  of  liquid  IF  steel containing Ti. ISIJ Int, 2005, 45（3）: 312 [26] Wakoh  M,  Sano  N.  Behavior  of  alumina  inclusions  just  after deoxidation. ISIJ Int, 2007, 47（5）: 627 [27] 潘    明等： RH 精炼过程中吹氧量对 IF 钢洁净度的影响 · 853 ·