正在加载图片...
.176 北京科技大学学报 2009年增刊1 参考文献 (崔立新，张家泉，陈志平，等.基于耦合模型的板坯连铸结晶 器内温度场的分析.钢铁，2004,39（增刊）：569) [1]Chen S Y,Chang G W.Wang JZ.et al.Effects of correlative factors on the interdendritic melt flow brought by the bulge in [8]Chen Z P.Cheng N L.Cui L X.et al.Application of dynamic continuous casting slabs.J Univ Sci Technol Beijing.2008. soft reduction for slab casting.Iron Steel,2004.39(Suppl):354 (陈志平，程乃良，崔立新，等，动态轻压下在板坯连铸中的应 15(4):407 [2]Miyazawa K.Schwerdtfeger K.Computation of bulging of con- 用.钢铁，2004,39（增刊）：354) tinuously cast slabs with simple bending theory.Ironmaking [9]Fu JX,Li JS,Zhang H.et al.Research on slab's broadening Steelmaking,1979.2:68 and mould's setting.Steelmaking.2010,26(1):15 (付建勋，李京社，张慧，等.连铸过程铸坯的展宽与结晶器设置 [3]Royzman S E.Shrinking stresses in a solidifying continuous slab. Steel Technol Int.1994.5:123 的研究炼钢，2010,26(1)：15) [4]Fujii H,Ohashi T,Hiromoto T.On the formation of internal [10]Wu D F,Cheng SS.Cheng Z J.Characteristics of shell thick- cracks in continuously cast slabs.Trans ISIJ,1978.18(5):510 ness in a slab continuous casting mold.Int J Miner Metall Mater,2009,16(1):25 [5]Zhu GS.Wang X H.Yu H X,et al.Strain in solidifying shell of continuous casting slabs.J Univ Sci Technol Beijing.2003. [11]Fu JX.Li JS.Zhang H.et al.Relations between broadening 10(6):26 of slab and casting speed.JIron Steel Res.2010.22(2):10 [6]Siyasiya C.van Rooyen GT.Stumpf W E.Metallurgical factors (付建勋，李京社，张慧，等，铸坯展宽现象及其与拉速关系的 that affect the strand width during continuous casting of DIN 研究.钢铁研究学报，2010,22(2)：10) 1.4003 stainless steel.J South African Inst Mining Metall, [12]Fu JX.Research on Mechanism and Control of Slab Broaden- 2005,105(7):473 ing in Continuous Casting [Dissertation]Beijing:University of [7]Cui L X.Zhang J Q.Chen Z P,et al.Analysis of temperature Science and Technology Beijing.2010:67 profiles in slab casting moulds with a coupled thermal model.Iron (付建勋连铸过程板坯展宽机理及控制的研究[学位论文] Steel,2004.39(Suppl):569 北京：北京科技大学，2010：67)参 考 文 献 ［1］ Chen S YChang G WWang J Zet al．Effects of correlative factors on the interdendritic melt flow brought by the bulge in continuous casting slabs． J Univ Sci Technol Beijing2008 15（4）：407 ［2］ Miyazawa KSchwerdtfeger K．Computation of bulging of continuously cast slabs with simple bending theory． Ironmaking Steelmaking19792：68 ［3］ Royzman S E．Shrinking stresses in a solidifying continuous slab． Steel Technol Int19945：123 ［4］ Fujii HOhashi THiromoto T．On the formation of internal cracks in continuously cast slabs．T rans ISIJ197818（5）：510 ［5］ Zhu G SWang X HYu H Xet al．Strain in solidifying shell of continuous casting slabs． J Univ Sci Technol Beijing2003 10（6）：26 ［6］ Siyasiya Cvan Rooyen G TStumpf W E．Metallurgical factors that affect the strand width during continuous casting of DIN 1∙4003 stainless steel． J South A f rican Inst Mining Metall 2005105（7）：473 ［7］ Cui L XZhang J QChen Z Pet al．Analysis of temperature profiles in slab casting moulds with a coupled thermal model．Iron Steel200439（Suppl）：569 （崔立新张家泉陈志平等．基于耦合模型的板坯连铸结晶 器内温度场的分析．钢铁200439（增刊）：569） ［8］ Chen Z PCheng N LCui L Xet al．Application of dynamic soft reduction for slab casting．Iron Steel200439（Suppl）：354 （陈志平程乃良崔立新等．动态轻压下在板坯连铸中的应 用．钢铁200439（增刊）：354） ［9］ Fu J XLi J SZhang Het al．Research on slab’s broadening and mould’s setting．Steelmaking201026（1）：15 （付建勋李京社张慧等．连铸过程铸坯的展宽与结晶器设置 的研究．炼钢201026（1）：15） ［10］ Wu D FCheng S SCheng Z J．Characteristics of shell thickness in a slab continuous casting mold． Int J Miner Metall Mater200916（1）：25 ［11］ Fu J XLi J SZhang Het al．Relations between broadening of slab and casting speed．J Iron Steel Res201022（2）：10 （付建勋李京社张慧等．铸坯展宽现象及其与拉速关系的 研究．钢铁研究学报201022（2）：10） ［12］ Fu J X．Research on Mechanism and Control of Slab Broadening in Continuous Casting ［Dissertation］．Beijing：University of Science and Technology Beijing2010：67 （付建勋．连铸过程板坯展宽机理及控制的研究［学位论文］． 北京：北京科技大学2010：67） ·176· 北 京 科 技 大 学 学 报 2009年 增刊1