Output Command Watchdog-Strobe Destination: Watchdog Timer Acceptable Values: high signal (on) Max-Time-Between-outputs: 200pERIoD msec Exception-Handling Feedback Information None Reversed By: Not necessary Comments References CONTENTS High signal on line WDT TRIGGERING CONDITION Operating ModeOperational inhibited State Values Time <=(Time sent Watchdog Strobe)+ 200 msec DOI-Status Fault-detecte Time >=(Time entered Altitude. Cannot-be-determined)+2 o secs.FOutput Command Watchdog-Strobe Destination: Watchdog Timer Acceptable Values: high signal (on) Min-Time-Between-Outputs: Max-Time-Between-Outputs: 0 200 msec PERIOD Exception-Handling: Feedback Information: None Reversed By: Not necessary Comments: References: CONTENTS = High signal on line WDT TRIGGERING CONDITION State Values T F Time >= (Time entered Altitude.Cannot-be-determined) + 2 Time <= F DOI-Status = Fault-detected DL T secs. Operating Mode Operational T T T Startup Inhibited (Time sent Watchdog Strobe) + 200 msec