ON MT9M001:1/2-Inch Megapixel Digital Image Sensor Features 1/2-Inch Megapixel CMOS Digital Image Sensor MT9M001C12STM(Monochrome)Datasheet,Rev.M For the latest datasheet.please visit www.onsemi.com Features Table 1: Key Performance Parameters Parameter Value .Array Format (5:4):1,280H x 1,024V (1,310,720 active pixels).Total (incl.dark pixels):1,312H x 1,048V Optical format 1/2-inch5:4 Active imager size (1,374,976 pixels) 6.66mmHx5.32mm() Active pixels 1280H×1.024V Frame Rate:30 fps progressive scan;programmable Pixel size 5.2m5.2nm C☆w尚 e to any smaller Shutter type Electronic rolling shutter (ERS) etc.) Maximum data rate/ 48 MPS/48 MHz Controls:Gain,frame rate,frame size master clock 0x102 ps progressive scan; Applications res x-sec namic range 682dB .PCcameras SNR A5 AR MAX Supply voltage General Description Power consumption The ON Semiconductor MT9M001 is an SXGA-for ating temperature 0°Cto+70℃ with a 1/2-inch CMOS active-pixel digital image sen Packaging 48-pin CLCC sor.The active imaging pixel array of 1,280Hx 1,024V.It The sensor can be operated in its default mode or p incorporates sophisticated camera functions on-chip grammed by the user for frame size osure,gain set such as windowing,column and row skip mode,and ting,and other parameters.The default mode outputs snapshot mode.It is programmable through a simple an sxGa-size image at 30 frames per second (fos).An two-wire serial interface. on-chip analog-to-digital converter (ADC)provides 10 s ON Semi bits per pixel.FRAME_VALID and LINE_VALID signals technology that achieves CCD image quaiy(based on are output on dedicated pins,along with a pixel clock that is synchronous with valid data. signal-to-noise ratio and low-light sensitivity)while maintaining the inherent size,cost,and integration advantages of CMOS. MT3Meos转PRt.5sh5E到MT9M001: 1/2-Inch Megapixel Digital Image Sensor Features MT9M001_DS Rev. M Pub. 5/15 EN 1 ©Semiconductor Components Industries, LLC , 1/2-Inch Megapixel CMOS Digital Image Sensor MT9M001C12STM (Monochrome) Datasheet, Rev. M For the latest datasheet, please visit www.onsemi.com Features • Array Format (5:4): 1,280H x 1,024V (1,310,720 active pixels). Total (incl. dark pixels): 1,312H x 1,048V (1,374,976 pixels) • Frame Rate: 30 fps progressive scan; programmable • Shutter: Electronic Rolling Shutter (ERS) • Window Size: SXGA; programmable to any smaller format (VGA, QVGA, CIF, QCIF, etc.) • Programmable Controls: Gain, frame rate, frame size Applications • Digital still cameras • Digital video cameras • PC cameras General Description The ON Semiconductor MT9M001 is an SXGA-format with a 1/2-inch CMOS active-pixel digital image sen￾sor. The active imaging pixel array of 1,280H x 1,024V. It incorporates sophisticated camera functions on-chip such as windowing, column and row skip mode, and snapshot mode. It is programmable through a simple two-wire serial interface. This megapixel CMOS image sensor features ON Semi￾conductor’s breakthrough low-noise CMOS imaging technology that achieves CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. Table 1: Key Performance Parameters The sensor can be operated in its default mode or pro￾grammed by the user for frame size, exposure, gain set￾ting, and other parameters. The default mode outputs an SXGA-size image at 30 frames per second (fps). An on-chip analog-to-digital converter (ADC) provides 10 bits per pixel. FRAME_VALID and LINE_VALID signals are output on dedicated pins, along with a pixel clock that is synchronous with valid data. Parameter Value Optical format 1/2-inch (5:4) Active imager size 6.66 mm (H) x 5.32 mm (V) Active pixels 1,280 H x 1,024 V Pixel size 5.2 m x 5.2 m Shutter type Electronic rolling shutter (ERS) Maximum data rate/ master clock 48 MPS/48 MHz Frame rate SXGA (1280 x 1024) 30 fps progressive scan; programmable ADC resolution 10-bit, on-chip Responsivity 2.1 V/lux-sec Dynamic range 68.2 dB SNRMAX 45 dB Supply voltage 3.0 V3.6 V, 3.3 V nominal Power consumption 363 mW at 3.3 V (operating); 294 W (standby) Operating temperature 0°C to +70°C Packaging 48-pin CLCC