MP02XXX190 Series EUrex SEMICONDUCTOR ABSOLUTE MAXIMUM RATINGS- PER ARM Stresses above those listed under Absolute Maximum Ratings' may cause permanent damage to the device. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety precautions should always be followed. Exposure to Absolute Maximum Ratings may affect device reliability Symbol Parameter Test Conditions Max. Units Mean on-state current Half wave resistive load 75C 85℃16 A RMS value T=75℃ Surge(non-repetitive)on-current 10ms half sine, T=125 C 6.8 KA ?t 1t for fusing 231X10A2s Surge(non-repetitive)on-current 10ms half sine, T=125 C KA ?t 1t for fusing 150X A2s Isolation voltage Commoned terminals to base plate 3000 AC RMS. 1 min. 50Hz THERMAL AND MECHANICAL RATINGS Parameter Test Conditions M Max. Units Thermal resistance- junction to case 0.21C/kW (per thyristor or diode) Half wave -0.22cW 3 Phase 0.23C/kW Thermal resistance- case to heatsink Mounting torque= 6Nm (per thyristor or diode) with mounting compound T Virtual junction temperature Reverse(blocking 12 T Storage temperature range -40125 Screw torque Mounting-M6 6(55)Nm(b ins) Electrical connections-M6 5 (44)Nm(lb ins) Weight(nominal) www.dynexsemi.com2/8 www.dynexsemi.com MP02XXX190 Series ABSOLUTE MAXIMUM RATINGS - PER ARM Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. In extreme conditions, as with all semiconductors, this may include potentially hazardous rupture of the package. Appropriate safety precautions should always be followed. Exposure to Absolute Maximum Ratings may affect device reliability. Test Conditions Half wave resistive load Tcase = 75˚C Tcase = 85˚C Tcase = 75˚C 10ms half sine, Tj = 125˚C VR = 0 10ms half sine, Tj = 125˚C VR = 50% VDRM Commoned terminals to base plate. AC RMS, 1 min, 50Hz Symbol I T(AV) I T(RMS I TSM I 2 t I TSM I 2 t Visol Units A A A kA A2 s kA A2 s V Max. 190 160 300 6.8 231 x 103 5.5 150 x 103 3000 Parameter Mean on-state current RMS value Surge (non-repetitive) on-current I 2 t for fusing Surge (non-repetitive) on-current I 2 t for fusing Isolation voltage Test Conditions dc Half wave 3 Phase Mounting torque = 6Nm with mounting compound Reverse (blocking) - Mounting - M6 Electrical connections - M6 - Parameter Thermal resistance - junction to case (per thyristor or diode) Thermal resistance - case to heatsink (per thyristor or diode) Virtual junction temperature Storage temperature range Screw torque Weight (nominal) THERMAL AND MECHANICAL RATINGS Symbol Rth(j-c) Rth(c-hs) Tvj Tstg - - Units ˚C/kW ˚C/kW ˚C/kW ˚C/kW ˚C ˚C Nm (lb.ins) Nm (lb.ins) g Max. 0.21 0.22 0.23 0.07 125 125 6 (55) 5 (44) 350 Min. - - - - - –40 - - -