1PMT50AT1/T3 Series MAXIMUM RATING Rating Symbol Value Maximum Ppk Dissipation, ( PW-10/1000 us)(Note 1)(1PMT5.0A-1PMT36A P Maximum Ppk Dissipation, (PW-10/1000 us)(Note 1)(1PMT40A-1PMT58A) W Maximum Ppk Dissipation, (PW-8/20 us)(Note 1) 1000 DC Power Dissipation TA= 25C(Note 2) Derate above25° mwrC Thermal Resistance from Junction-to-Ambient Thermal Resistance from Junction-to-Lead(Anode) Maximum DC Power Dissipation( Note 3 Thermal Resistance from Junction to Tab(Cathode) °CN Operating and Storage Temperature Range 55to+150 1. Non-repetitive current pulse at TA= 25C 2. Mounted with recommended minimum pad size, DC board FR-4 3. At Tab( Cathode)temperature, Ttab=75.C ELECTRICAL CHARACTERISTICS (TA=25C unless therwise noted, Ve= 3.5V Max @ lF(Note 4)=35 A) Symbol Parameter Maximum Reverse Peak Pulse Current Vc Clamping Voltage @lpp VRWM Working Peak Reverse Voltage MAXimu e Leakage Current VRWM Breakdown Voltage IT Forward Current Forward voltage IF Uni-Directional Tvs ELECTRICAL CHARACTERISTICS(TL=30 C unless otherwise noted, VF= 1.25 Volts 200 mA) VBR IT(V)(Note 6) IT IR@VRWM Vc @lpP IpP(A) 1PMT5.0AT1,T3 50 21 1PMT70AT1.T MKM 1PMT12AT1 T3 MLE 13.3 14.7 10.1 1PMT16AT1 T3 MLP 1PMT18AT1 T3 MLT 2682 18.75 19.7 1.0 50 2 21.0 22.1 1PMT22AT1 T3 MLX 244 26.9 5.6 1PMT24AT1 T3 MLZ 2 28.1 29.5 1.0 89 5.1 1PMT26AT1 T3 MME 42.1 32.8 36.8 1PMT33AT1 T3 36.7 1PMT36AT1 T3 MMP 40.0 42.1 44.2 1.0 58.1 3.4 1PMT40AT1 T3 64.5 533561 1PMT51AT1 T3 MMZ 51 597 62.7 1.0 5.0 24 2.1 MT5BAT 4. 1/2 sine wave(or equivalent square wave), PW=8.3 ms, duty cycle= 4 pulses per minute maximum 5. A transient suppressor is normally selected according to the Working Peak Reverse Voltage (VRwm which should be equal to or great than the DC or continuous peak operating voltage level 6. VBR measured at pulse test of25°C 7. Surge current waveform per Figure 2 and derate httpllonsemi.comUni−Directional TVS IPP IF V I IR IT VC VBR VRWM VF 1PMT5.0AT1/T3 Series http://onsemi.com 2 MAXIMUM RATINGS Rating Symbol Value Unit Maximum Ppk Dissipation, (PW−10/1000
s) (Note 1) (1PMT5.0A − 1PMT36A) Ppk 200 W Maximum Ppk Dissipation, (PW−10/1000
s) (Note 1) (1PMT40A − 1PMT58A) Ppk 175 W Maximum Ppk Dissipation, (PW−8/20
s) (Note 1) Ppk 1000 W DC Power Dissipation @ TA = 25°C (Note 2) Derate above 25°C Thermal Resistance from Junction−to−Ambient °PD° RJA 500 4.0 248 °mW mW/°C °C/W Thermal Resistance from Junction−to−Lead (Anode) RJanode 35 °C/W Maximum DC Power Dissipation (Note 3) Thermal Resistance from Junction to Tab (Cathode) °PD° RJcathode 3.2 23 W °C/W Operating and Storage Temperature Range TJ, Tstg −55 to +150 °C 1. Non−repetitive current pulse at TA = 25°C. 2. Mounted with recommended minimum pad size, DC board FR−4. 3. At Tab (Cathode) temperature, Ttab = 75°C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 4) = 35 A) Symbol Parameter IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM Working Peak Reverse Voltage IR Maximum Reverse Leakage Current @ VRWM VBR Breakdown Voltage @ IT IT Test Current IF Forward Current VF Forward Voltage @ IF ELECTRICAL CHARACTERISTICS (TL = 30°C unless otherwise noted, VF = 1.25 Volts @ 200 mA) VRWM VBR @ IT (V) (Note 6) IT IR @ VRWM VC @ IPP IPP (A) Device Marking (Note 5) Min Nom Max (mA) (
A) (V) (Note 7) 1PMT5.0AT1, T3 MKE 5.0 6.4 6.7 7.0 10 800 9.2 21.7 1PMT7.0AT1, T3 MKM 7.0 7.78 8.2 8.6 10 500 12 16.7 1PMT12AT1, T3 MLE 12 13.3 14.0 14.7 1.0 5.0 19.9 10.1 1PMT16AT1, T3 MLP 16 17.8 18.75 19.7 1.0 5.0 26 7.7 1PMT18AT1, T3 MLT 18 20.0 21.0 22.1 1.0 5.0 29.2 6.8 1PMT22AT1, T3 MLX 22 24.4 25.6 26.9 1.0 5.0 35.5 5.6 1PMT24AT1, T3 MLZ 24 26.7 28.1 29.5 1.0 5.0 38.9 5.1 1PMT26AT1, T3 MME 26 28.9 30.4 31.9 1.0 5.0 42.1 4.8 1PMT28AT1, T3 MMG 28 31.1 32.8 34.4 1.0 5.0 45.4 4.4 1PMT30AT1, T3 MMK 30 33.3 35.1 36.8 1.0 5.0 48.4 4.1 1PMT33AT1, T3 MMM 33 36.7 38.7 40.6 1.0 5.0 53.3 3.8 1PMT36AT1, T3 MMP 36 40.0 42.1 44.2 1.0 5.0 58.1 3.4 1PMT40AT1, T3 MMR 40 44.4 46.8 49.1 1.0 5.0 64.5 2.7 1PMT48AT1, T3 MMX 48 53.3 56.1 58.9 1.0 5.0 77.4 2.3 1PMT51AT1, T3 MMZ 51 56.7 59.7 62.7 1.0 5.0 82.4 2.1 1PMT58AT1, T3 MNG 58 64.4 67.8 71.2 1.0 5.0 93.6 1.9 4. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. 5. A transient suppressor is normally selected according to the Working Peak Reverse Voltage (VRWM) which should be equal to or greater than the DC or continuous peak operating voltage level. 6. VBR measured at pulse test current IT at ambient temperature of 25°C. 7. Surge current waveform per Figure 2 and derate per Figure 4.