正在加载图片...
岩土工程学报 Vol.35 Supp.2 Chinese Journal of Geotechnical Engineering 0ct.201 港珠澳大桥大直径钻孔灌注桩自平衡法实验研究 王中文,刘志峰,罗永传 (广东省长大公路工程有限公可,广东广州510620) 摘要:以港珠澳大桥主体工程为背景,采用两根钻孔灌注柱进行试柱实践,为获取设计参 眠决了 衣明 四 :的 在买 抹平用 关键词:试桩:大直径:钻孔灌注桩:施工工艺:泥浆:自平衡法:港珠澳大桥 中图分类号:TU473.1 坛扣思。A 文章编号:1000-454820131S2-1216-04 作者简介:王中文(19%5·),男,湖南造县人,教授级高级工程师,主要从事桥梁工程研究。E-ma止 ang wen@vip.163.com. Self-balanced method for large-diameter bored piles of Hong Kong-Zhuhai-Macao Bridge Co Ltd G hou 510620 China Abstract Taking Hong Kong-Zhuhai-Macao Bridge an engin bored pilesare regarded as the test piles ction process of deep foundation of the sea i studied.The results verify that the problem of constructing offshore pile foundation with high requirements for equipmer performance drilling is solved by using the four-wing drag bit in the cover laver and ball hob drill head in the rock laver.In the actual construction of the bore holes.for pile No.SZ5.seawater undisturbed soil slurry are used.and for pile No.SZ6.the freshwater+undisturbed soil slurry are used.High-quality mud is developed to ensure the quality of the two bored piles nalysis of oad te以h ation of variou Key words:test pile;large diameter;bored pile;construction technology,mud:self-balanced method:Hong Kong-Zhuhai-Macao Bridge 0引 言 隧道长约6km 港珠澳大桥工程区域地质条件和海况复杂、环境 本次钻孔灌注桩试桩共两根,编号为SZ5和SZ6, 保护要求高,在该区域无运用大直径、深基础桩的先 桩径为180cm,桩顶标高4.15m,桩底标高-38.00m, 例,缺乏可以利用与借鉴的设计资料及施工经验。 为 进入中风化花岗岩层5.2m,桩长42.15m,按端承桩 确定桩基承载力,给桩基设计提供各项参数 完善大 设计。 桥桩基设计,并为主体工程钻孔灌注桩的施工积累相 关经验,决定选择两根桩基进行了试桩试验。 2试桩施工技术 2.1地层概况 1工程概况 钻孔灌注柱试柱施工前,在钻孔灌注桩试桩桩位 港珠澳大桥跨越珠江口伶仃洋海域,是连接香港、 进行了两个补充地质钻孔。补充地质钻孔揭示的试 珠海及澳门的大型跨海通道。大桥主体工程采用桥隧 组合方式,其中大桥主体工程全长约29.6km,海底 基金项目:国家自然科学整金项目《4072170:广东省交通科技项目 收稿日期:2013-06-15 C)1994-2019 China Academie Journal Electronie Publishing Ho All rights reserved. http://www.cnki.ne 第 35 卷 增刊 2 岩 土 工 程 学 报 Vol.35 Supp.2 2013 年 .10 月 Chinese Journal of Geotechnical Engineering Oct. 2013 港珠澳大桥大直径钻孔灌注桩自平衡法实验研究 王中文,刘志峰,罗永传 (广东省长大公路工程有限公司,广东 广州 510620) 摘 要:以港珠澳大桥主体工程为背景,采用两根钻孔灌注桩进行试桩实践,为获取设计参数,采用自平衡法进行成 桩静载试验,且对该区深基础海上施工工艺进行了研究。研究结果表明:钻进中在覆盖层内采用四翼刮刀钻头,岩层 内采用球齿滚刀钻头解决了海上桩基施工对设备性能要求高的难题;在实际成孔施工时,对桩号 SZ5 桩基采用海水+ 原状土造浆,对桩号 SZ6 桩基采用淡水+原状土造浆,研制的高质量泥浆保证了两桩钻孔效果良好;通过对静载试验数 据的分析,综合考虑多种因素,获取了相关设计参数,完善了大桥桩基设计。以上研究成果可为大直径钻孔灌注桩的 应用提供参考。 关键词:试桩;大直径;钻孔灌注桩;施工工艺;泥浆;自平衡法;港珠澳大桥 中图分类号:TU473.1 文献标识码:A 文章编号:1000–4548(2013)S2–1216–04 作者简介:王中文(1965– ),男,湖南澧县人,教授级高级工程师,主要从事桥梁工程研究。E-mail: wangzhongwen@vip.163.com。 Self-balanced method for large-diameter bored piles of Hong Kong-Zhuhai-Macao Bridge WANG Zhong-wen, LIU Zhi-feng, LUO Yong-chuan (Guangdong Provincial ChangDa Highway Engineering Co., Ltd., Guangzhou 510620, China) Abstract: Taking Hong Kong-Zhuhai-Macao Bridge as an engineering example, two bored piles are regarded as the test piles. The parameters are obtained based on self-balanced load test piles. The construction process of deep foundation of the sea is studied. The results verify that the problem of constructing offshore pile foundation with high requirements for equipment performance drilling is solved by using the four-wing drag bit in the cover layer and ball hob drill head in the rock layer. In the actual construction of the bore holes, for pile No. SZ5, seawater + undisturbed soil slurry are used, and for pile No. SZ6, the freshwater + undisturbed soil slurry are used. High-quality mud is developed to ensure the quality of the two bored piles. Through the analysis of the static load test data, comprehensive consideration of various factors, related design parameters are obtained so as to improve the pile foundation design. The results may provide reference for applying large-diameter bored piles. Key words: test pile; large diameter; bored pile; construction technology; mud; self-balanced method; Hong Kong-Zhuhai-Macao Bridge 0 引 言 港珠澳大桥工程区域地质条件和海况复杂、环境 保护要求高,在该区域无运用大直径、深基础桩的先 例,缺乏可以利用与借鉴的设计资料及施工经验。为 确定桩基承载力,给桩基设计提供各项参数,完善大 桥桩基设计,并为主体工程钻孔灌注桩的施工积累相 关经验,决定选择两根桩基进行了试桩试验[1]。 1 工程概况 港珠澳大桥跨越珠江口伶仃洋海域,是连接香港、 珠海及澳门的大型跨海通道。大桥主体工程采用桥隧 组合方式,其中大桥主体工程全长约 29.6 km,海底 隧道长约 6 km。 本次钻孔灌注桩试桩共两根,编号为 SZ5 和 SZ6, 桩径为 180 cm,桩顶标高 4.15 m,桩底标高-38.00 m, 进入中风化花岗岩层 5.2 m,桩长 42.15 m,按端承桩 设计。 2 试桩施工技术 2.1 地层概况 钻孔灌注桩试桩施工前,在钻孔灌注桩试桩桩位 进行了两个补充地质钻孔。补充地质钻孔揭示的试桩 ─────── 基金项目:国家自然科学基金项目(40772170);广东省交通科技项目 (2011-02-043) 收稿日期:2013–06–15
向下翻页>>
©2008-现在 cucdc.com 高等教育资讯网 版权所有