.1106 工程科学学报，第43卷，第8期 (李想，薛济来，郎光辉，等.铝用石墨质阴极不同格烧温度下孔 [24]Wang Z J,Toyohiko T J,Ma C L.Comparative TEM investigation 隙结构演化.北京科技大学学报，2014,36(9)：1233) on the precipitation behaviors in Cu-15wt%Sn alloy.Rare Met, [21]Wang X F,Zhao JZ,He J,et al.Microstructural features and 2013,32(2):139 mechanical properties induced by the spray forming and cold [25]MaoZF,Zhang DZ,Wei PT.et al.Manufacturing feasibility and rolling of the Cu-13.5wt pct Sn alloy.J Mater Sci Technol,2008 forming properties of Cu-4Sn in selective laser melting.Materials 24(5):803 2017,10(4):333 [22]Saunders N,Miodownik A P.The Cu-Sn(Copper-Tin)system. [26]Ventura A P,Wade C A,Pawlikowski G,et al.Mechanical Bull Alloy Phase Diagrams,1990,11(3):278 properties and microstructural characterization of Cu-4.3 Pct Sn [23]Furtauer S,Li D,Cupid D,et al.The Cu-Sn phase diagram,Part I: fabricated by selective laser melting.Metall Mater Trans A,2017, New experimental results.Intermetallics,2013,34:142 48(1):178（李想, 薛济来, 郎光辉, 等. 铝用石墨质阴极不同焙烧温度下孔 隙结构演化. 北京科技大学学报, 2014, 36（9）：1233） Wang  X  F,  Zhao  J  Z,  He  J,  et  al.  Microstructural  features  and mechanical  properties  induced  by  the  spray  forming  and  cold rolling of the Cu‒13.5wt pct Sn alloy. J Mater Sci Technol, 2008, 24（5）: 803 [21] Saunders  N,  Miodownik  A  P.  The  Cu ‒Sn(Copper ‒Tin)  system. Bull Alloy Phase Diagrams, 1990, 11（3）: 278 [22] Fürtauer S, Li D, Cupid D, et al. The Cu–Sn phase diagram, Part I: New experimental results. Intermetallics, 2013, 34: 142 [23] Wang Z J, Toyohiko T J, Ma C L. Comparative TEM investigation on  the  precipitation  behaviors  in  Cu ‒15wt%Sn  alloy. Rare Met, 2013, 32（2）: 139 [24] Mao Z F, Zhang D Z, Wei P T, et al. Manufacturing feasibility and forming properties of Cu‒4Sn in selective laser melting. Materials, 2017, 10（4）: 333 [25] Ventura  A  P,  Wade  C  A,  Pawlikowski  G,  et  al.  Mechanical properties  and  microstructural  characterization  of  Cu ‒4.3  Pct  Sn fabricated by selective laser melting. Metall Mater Trans A, 2017, 48（1）: 178 [26] · 1106 · 工程科学学报，第 43 卷，第 8 期