3. Process Equipment/Machinery 3.1 Adequate equipment layout avoiding congestion 3.1.1 The design and layout of the factory and equipment must ensure efficient production of safe products and allow access for adequate cleaning and pest control
Handout 13: More about plants with right half-plane zeros Eric Feron March 15, 2004 Right half-plane zeros and sensor/actuator design Influence of sensor position on system dynamics: Star Market
Computer technologies have been changing the environment of engineering design-enabling MDO Hardware: Advances in processor speed, memory and storage Software: Powerful disciplinary analysis and simulation programs(e.g. Nastran, Fluent...)
The experience of the 1960s has shown that for military aircraft the cost of the final increment of performance usually is excessive in terms of other characteristics and that the overall system must be optimized, not just performance Ref: Current State of the art of Multidisciplinary design Optimization
Mesd Heuristic Search Techniques 16888 2S0.77 Main Motivation for Heuristic Techniques: (1)To deal with local optima and not get trapped in them (2)To allow optimization for systems, where the design variables are not only continuous, but discrete
1. You need to deposit a high quality (low electrical resistivity) Al film at a very high rate(v> I micron/min) and achieve good step coveage using sputter deposition. Referring to information in the class notes and text, answer the following three questions. (Grade will depend more on how you justify your design, rather than on its
