A Cauchy stress component at a given(fixed) point P of a structure in equilibrium under the action of external loads is defined when 1. the direction of the face on which the stress component acts is specified 2 the direction of the force from which the stress component is derived is specified None of the above statements

The theory of extensive games is built upon a key notion, that of sequential rationality, and a key insight, the centrality of off-equilibrium beliefs. The definition of sequential equilibrium brings both to the fore in a straightforward manner, and emphasizes their interrelation. From subgame perfection to sequential rationality

1.关联矩阵M(D),M(G) 2.用基本联矩阵M(G)求所有生成树 3.邻接矩阵A(D),相邻矩阵A(G) 4.用A的幂求不同长度通路(回路)总数 米 5.可达矩阵P(D),连通矩阵P(G) 6.单源最短路径问题, Dijkstra算法

麦克斯韦最先注意到(也可以从十分简单的计算得出), 当两个点A,B一起移动而不带动附近的以太时,光线从点 A走到点B再返回点A所需的时间一定会不同.当然,这个 差值是个二阶量,但是用灵敏的干涉方法已经足以检测出来。 迈克尔逊于1881年做了这样的实验他的仪器是一种 干涉仪,有两个长度相等并互相垂直的水平臂P和Q.两東 互相干涉的光线,一束沿P臂往返,另一束沿Q臂往返。整个 仪器包括光源和观察装置,可以绕竖直轴转动.当P臂或Q 臂尽可能与地球运动方向相同时的两个位置值得特别考虑 根据菲涅尔理论可以预言,当仪器从一个主位置转到另一个 主位置时,千涉条纹应发生位移 但是,取决于光传播时间改变的这种位移(为简单起见

Objectives To learn what choice paragraph is To learn to write a choice paragraph effectively In a paragraph where you have to make a choice, you need to choose which object, idea, or action sor events

第九章功率放大电路 自测题 一、选择合适的答案,填入空内。只需填入A、B或C (1)功率放大电路的最大输出功率是在输入电压为正弦波时,输出基 本不失真情况下,负载上可能获得的最大 A.交流功率 B.直流功率 C.平均功率 (2)功率放大电路的转换效率是指 A.输出功率与晶体管所消耗的功率之比 B.最大输出功率与电源提供的平均功率之比 C.晶体管所消耗的功率与电源提供的平均功率之比 (3)在OCL乙类功放电路中,若最大输出功率为1W,则电路中功放 管的集电极最大功耗约为

To learn different types of paragraphs and their features. Introduction of different types of paragraphs Definition paragraph When you are writing a definition paragraph, you take a term or an idea and write about what it is. Often, definitions are combined with classification or other forms of organization. You need to give a careful definition of

一、单项选择题(每小题2分) 1、A2、B3、A4、C5、D 6、B7、D8、C9、C10、C 二、多项选择题(每小题2分) 、cde2、abcd3、abC4、C5、bCD 6、A7、ACd8、ABe9、BCDE10、ABDE

测3.1.1图示单向均匀拉伸的板条。若受力前在其表面画上两个正方形a和b,则受力后 正方形a、b分别变为 A.正方形、正方形;B.正方形、菱形C.矩形、菱形;D.矩形、正方形

测1.1.1构件的强度、刚度和稳定性 A.只与材料的力学性质有关; B.只与构件的形状尺寸有关; C.与A和B都有关; D.与A和B都无关