材料在外力作用下所呈现的有关强度和变形方面的特 性,称为材料的力学性能。 材料力学性能是构件强度、刚度和稳定计算的重要组成部分, 也是合理选用材料和从事新材料研究的重要依据。 材料的力学性能都要通过试验来测定。 本节主要介绍工程中常用材料在拉伸和压缩时的力学性能

这些连接件除主要发生剪切变形以外,在 受剪面pn, 受压现象(如上图)构件在较小的局部区域到 剪力QH, ua相应的压力叫挤压力(mngt挤压面mn 的应力叫挤压应力( bearing stress)记为or挤压加P=H 因连接件的受力和变形很复杂不能用材 故连接件的强度计算一般采用工程实用计算

1.BASE Power dissipation 2. COLLECTOR pcm:1.5w(tamb=25℃)

1、请先登记 每组请先到前面讲台登记,请写清楚下面几项:组员、设计项目、实验台编号、开始实验时间,离开时写清楚离开时间

These circuits consist of four independent, high TSSOP14 (Thin Shrink Small Outline e Package) gain, intemally frequency compensated operation al amplifiers. They operate from a single power supply over a wide range of voltages. Operation

General Description de range of applica is local on card bypassing is needed only if the regulator is located far from 9 gulation, eliminating the distribution problems associated the filter capacitor of the power supply

一、如何知道机器行走的距离?

TWO-Terminal Ic DEVICES Temperature Transducer AD590 FEATURES PIN DESIGNATIONS Linear Current Output: 1 HA/K Wide Range:-55C to+150C Probe Compatible Ceramic Sensor Package

General Description hese devices need only one external com ation capacitor at the output. Tthe LM? aged in the to-220 power package and is capable applications requiring other voltages, see LM137 data 4 supplying 1.5A of output current These regulators employ internal current limiting safe area Features a Thermal, short circuit and sa tually all overload conditions

一、现实生活中,我们经常需要获取物体运动的速度,比如:汽车是否超速?摩托车的速度表,控制系统中电机的转速等等。 二、实际测量中线位移的测量比较麻烦(测量装置尺寸很大),一般转换为角位移的测量。同样,线速度的测量一般转换为角速度的测量。这种转换很容易,比如使用一个从动轮即可。 三、思考:如何获得机器人当前运行的速度 Industry Training Center