STEMMANN TECHNIK GMBH DIN EN ISO 9001 The slipring assembly is solely used for transmission of electrical powers and data Others than the above described uses are regarded as not normal. For damages which result from not normal use Stemmann-Technik GmbH will not take over any responsibility. This is the sole risk of the user Part of the normal use are also observance of the operation instructions and compliance with the inspection- and maintenance conditions Reconstructions and modifications You may not effect any changes, reconstructions or modifications at the slipring assembly with prior approval by STEMMANN-TECHNIK GmbH If reconstructions or modifications are effected at the slipring assembly without an approval of STEMMANN-TECHNiK the warranty expires Spare parts You may only use original Stemmann-Technik spare parts resp. spare parts recommended by Stemmann-Technik as Stemmann-Technik will not take over responsibility for damages resulting from use of foreign spare parts Selection and qualification of personnel Please observe the following requirements to the personnel allowed to work at the slipring assembly Only employ reliable personnel Observe legally approved minimum age Only employ skilled and instructed personnel! Clearly define responsibilities of the personnel for mounting, installation and maintenance Make sure that only personnel authorised for this purpose is working on the device 6.1 Personnel for installation, mounting and maintenance STEMMANN-TECHNIK GMBH Quendorfer StraBe 34 Postfach 14 60 TEL:+49(0)592381208 D48465 Schutt D48459 Schuttorf FAX:+49(0)5923/81274 Page 6 of 16STEMMANN￾TECHNIK GMBH DIN EN ISO 9001 STEMMANN-TECHNIK GMBH Quendorfer Straße 34 Postfach 14 60 TEL: +49 (0) 5923/81 208 D 48465 Schüttorf D 48459 Schüttorf FAX: +49 (0) 5923/81 274 Page 6 of 16 The slipring assembly is solely used for transmission of electrical powers and data. Others than the above described uses are regarded as not normal. For damages which result from not normal use Stemmann-Technik GmbH will not take over any responsibility. This is the sole risk of the user. Part of the normal use are also observance of the operation instructions and compliance with the inspection- and maintenance conditions. 4 Reconstructions and modifications You may not effect any changes, reconstructions or modifications at the slipring assembly with prior approval by STEMMANN-TECHNIK GmbH. If reconstructions or modifications are effected at the slipring assembly without an approval of STEMMANN-TECHNIK the warranty expires. 5 Spare parts You may only use original Stemmann-Technik spare parts resp. spare parts recommended by Stemmann-Technik as Stemmann-Technik will not take over responsibility for damages resulting from use of foreign spare parts. 6 Selection and qualification of personnel Please observe the following requirements to the personnel allowed to work at the slipring assembly: • Only employ reliable personnel! • Observe legally approved minimum age! • Only employ skilled and instructed personnel! • Clearly define responsibilities of the personnel for mounting, installation and maintenance! • Make sure that only personnel authorised for this purpose is working on the device! 6.1 Personnel for installation, mounting and maintenance