14.1基本原理 14.1.1(气泡间隔的)连续流动自动分析仪 以空气为间隔,试剂和样品在被隔开的小室中均匀 混合并达到稳态

•在化学实验中，经常使用各种化学药品和仪器设备，以及水、电、煤气，还会经常遇到高温、低温、高压、真空、高电压、高频和带有辐射源的实验条件和仪器，若缺乏必要的安全防护知识，会造成生命和财产的巨大损失。•每年一度的化学实验安全防护教育是非常重要的

For the potato-shaped body given in class to explain the concept of stress, the field of stress vectors t(n)=t(n)(x)on the plane of normal n given by its cartesian components(1,0, 0) known and its cartesian components are given by the expression

The work of the external forces in the spring system of the figure is given by W=B*(U1+U2+U3)(2) W=P1*U1+P2米U2+B米U3(3) None of the above statements

What do you think the eigenvectors of the element stiff- ness matrix represent? 1. a basis in which the stiffness matrix would be diago- nal (if rotated to that basis) 2. a set of nodal displacements for the element corre-

本工作在分析φ250mm×6半连续小型轧机的综合测定试验资料的基础上,着重研究了它的负荷分布情况,明确了差速器损坏的主要原因,给出了强化差速器设计所必需的扭矩MB、功率N等负荷参数并建立了角钢连轧的能耗模型

The state of stress at a point is completely determined when: 1. the stress vectors on three different planes are specified 2. the stress vectors on two different planes are speciale 3. the stress vectors one arbitrary plane is spec-

采用相分析和X射线衍射技术,研究了含Ti、Nb等微合金元素的高强钢中碳氮化物的溶解行为.结果表明,加热到1250℃,未均热时,主要是面心立方结构的Ti(CN)、(TiNb)(CN)、TiC析出相;均热时间为45min,部分Ti和Nb继续溶解,析出相转为Ti(CN)、TiC为主,平均颗粒尺寸由300nm增大为323nm,此时Ti、Nb固溶已经达到平衡,固溶率分别为64.2%和85.8%.当保温80min时,析出相含量基本没有变化,但颗粒尺寸有所增加

Why is the element stiffness matrix singular in a finite element formulation? 1. So that it can accomodate rigid element dis- placements without introducing spurious nodal 2 Because we made a mistake in the formula- tion the stiffness matrix should not be sin- g 3. Because we havent enforced any displace ment boundary conditions(it's a variational approach after all) Statement(1)

A Cauchy stress component at a given(fixed) point P of a structure in equilibrium under the action of external loads is defined when 1. the direction of the face on which the stress component acts is specified 2 the direction of the force from which the stress component is derived is specified None of the above statements