第一节 良好的生产规范（GMP） 第二节 危害分析关键控制点(HACCP) 第三节 ISO9000认证

一、发酵乳的定义 根据国际乳品联合会(IDF)1992年发布的 标准,发酵乳的定义为:乳或乳制品在特 征菌的作用下发酵而成的酸性凝乳状产品 。在保质期内,该类产品中的特征菌必须 大量存在,并能继续存活和具有活性。所 有原料乳或乳制品可以不经均质,但必须 经过巴氏杀菌

Milk is a fluid secreted by the female of all mamalian species, of which there are more than 4000, for the primary function of meeting the complete nutritional requirements of the neonate of the species. In addition, milk serves several physiological functions for the neonate. Most of the non- nutritional functions of milk are served by proteins and peptides which

The milks of all mammals contain lipids but the concentration varies widely between species from c. 2% to greater than 50%(Table 3. 1). The principal function of dietary lipids is to serve as a source of energy for the neonate and the fat content in milk largely reflects the energy requirements of the species, e.g. land animals indigenous to cold environments and marine

Normal bovine milk contains about 3. 5% protein. The conce changes significantly during lactation, especially during the first ft post-partum(Figure 4. 1); the greatest change occurs in the whey fraction(Figure 4.2). The natural function of milk proteins is to supply

The salts of milk are mainly the phosphates, citrates, chlorides, sulphates, carbonates and bicarbonates of sodium, potassium, calcium and mag- nesium. Approximately 20 other elements are found in milk in trace amounts, including copper, iron, silicon, zinc and iodine. Strictly speaking

The water content of dairy products ranges from around 2.5 to 94%(w/w) (Table 7.1) and is the principal component by weight in most dairy products, including milk, cream, ice-cream, yogurt and most cheeses. The moisture content of foods (or more correctly their water activity, section 7.3), together with temperature and pH, are of great importance to food technology. As described in section 7.8 water plays an extremely important

In modern dairy technology, milk is almost always subjected to a heat treatment; typical examples are: Thermization e.g.65°℃×15s Pasteurization LTLT (low temperature, long time) 63C 30 min HTST(high temperature, short time) 15s Forewarming(for sterilization)

Milk is a dilute emulsion consisting of an oil/fat dispersed phase and an aqueous colloidal continuous phase. The physical properties of milk are similar to those of water but are modified by the presence of various solutes (proteins, lactose and salts) in the continuous phase and by the degree of dispersion of the emulsified and colloidal components

Milk has been the subject of scientific study for about 150 years and consequently, is probably the best characterized, in chemical terms, of our major foods. It is probably also the most complicated and serves as the raw material for a very large and diverse family of food products. Dairy science