Liquid-liquid extraction is a unit operation frequently employed in the pharmaceutical industry, as in many others, for recovery and purification of a desired ingredient from the solution in which it was prepared. Extraction may also be used to remove impurities from a feed stream

Cross-flow filtration (CFF) also known as tangential flow filtration is not of recent origin. It began with the development of reverse osmosis (RO) more than three decades ago. Industrial RO processes include desalting of sea water and brackish water, and recovery and purification of some fermentation products. The cross-flow membrane filtration technique was next applied to the concentration and fractionation ofmacromolecules commonly recognized

Fermentation and Biochemical Engineering Handbook Figure 20. Photograph of radial flow impeller in a baffled tank in the laminar region, made by passing a thin plane of light through the center of the tank

Fluid mixing is essential in fermentation processes. Usually the most critical steps in which mixers are used are in the aerobic fermentation process. However, mixers are also used in many auxiliary places in the fermentation process and there are places also for agitation in anaerobic fermentation steps

Specific nutritional requirements of microorganisms used in industrial fermentation processes are as complex and varied as the microorganisms in question. Not only are the types of microorganisms diverse (bacteria, molds and yeast, normally), but the species and strains become very specific as to their requirements

2.1 The Microbiological Laboratories Isolation of organisms for new products normally does not occur in laboratories associated with production cultures, however, production (mi￾crobiological) laboratories frequently do mutation and isolation work to produce strains with higher yields, to suppress a by-product, to reduce the formation of a surfactant, to change the physical properties of the broth to facilitate the product recovery

Fermentation and Biochemical Engineering Handbook microorganisms, mammalian cells, plant cells, and tissue. It is our sincere hope that the reader will find this chapter helpful in determining the best conditions for cultivation and the collection of scale-up data. Hopehlly, this knowledge will, in turn, facilitate the transformation of worthwhle research

《CAXA实体设计手册》教学资源（学习资料）第E章 特殊功能键的定义

《CAXA实体设计手册》教学资源（学习资料）第C章 三维设计纵览

《CAXA实体设计手册》教学资源（学习资料）第A章 CAXA实体设计介绍