2.1 TMS320C54x的特点和硬件组成框图 2.2 TMS320C54x的总线结构 2.3 TMS320C54x的存储器分配 2.4 中央处理单元（CPU） 2.5 TMS320C54x片内外设简介 2.6 硬件复位操作 2.7 TMS320VC5402引脚及说明

一.C54X汇编工具的使用 C54X的源程序可以使用汇编或C语言编 写。使用汇编语言是可以使用助记符 指令集(Mnemonic Instruction Set )或代数指令集(Algebraic Instruction Set),但两种不能混用

一、多总线结构,三组16-bit数据总线和一组程序总线 二、40-bit算术逻辑单元(ALU),包括一个40-bit的桶形 三、移位器和两个独立的40-bit加器 四、17x17-bit并行乘法器,连接一个40-bit的专用加法器

一、问题的提出 二、解决问题的思路与方法 三、基2时间抽取FFT算法 四、基2时间抽取FFT算法的计算复杂度 五、基2时间抽取FFT算法流图规律 六、基2频率抽取FFT算法 七、FFT算法的实际应用

Later in the course we shall review various methods of designing frequency-selective filters satisfying prescribed specifications · We now describe several loworder- FIR and IIR digital filters with reasonable selective frequency responses that often are satisfactory in a number of applications Copyright 2001, S. K. Mitra

Objective-Determination- of realizable transfer function G() approximating a given frequency response specification is an important step in the development of a digital filter If an IIR filter is desired, G() should be a stable real rational function Digital filter design is the process of deriving the transfer function G

An LtI discrete-time- system is completely characterized in the time-domain by its impulse response {h[n]} We consider now the use of the DTFT and the z-transform in developing the transform- domain representations of an Lti system Copyright 2001, S. K. Mitra

Z-Transform The DTFT provides a frequency-domain representation of discrete-time signals and LTI discrete-time systems Because of the convergence condition, in many cases. the DTFT of a sequence may not exist As a result, it is not possible to make use of such frequency-domain characterization in these cases

Comb Filters The simple filters discussed so far are characterized either by single passband and/or a single stopband There are applications where filters with multiple passbands and stopbands are required The comb filter is an example of such filters Copyright 2001, S. K. Mitra

1.1 Introduction Any problems about signal analyses and processing may be thought of letting signals trough systems. f(t) y(t) h(t) From f(t) and h(t), find y(t), Signal processing From f(t) and y(t), find h(t), System design From(t)andh(t), find(t), Signal reconstruction