Model Revision Client Slider qty Model Sagem GSM DESK PHONE Lifter aty Part name Hook Gate type:side Part no 050-003-115 Cavities l+1+1 DFM by HYJ 2/3 Plate
Model Revision : A Client : Slider qty : 2 Model : Sagem GSM DESK PHONE Lifter qty : Part name : Hook Gate type : side Part no.. : 050-003-115 Cavities : 1+1+1 DFM by : H Y J 2/3 Plate : 2
ICAL 1- Date of opening (all dates in 2005) CAL 2- Date of beginning of action 3.- Date foreseen for validation DEM follow-up issue. Integral Corrective Action List 4- Date of validation(closing) Pa Solutions / Action Who 1 2 P 3 Gate(mold flow) Waiting for confirmation. . pArting line Waiting for confirmation P5 Slider aiting for confirmation P 6 Suggestion(thick plastic) Waiting for confirmation P7 Draft angle Waiting for confirmation P 8 P.10 P.12 P13 P.15 P17
ICAL ICAL 1 - Date of opening (all dates in 2005) 2 - Date of beginning of action 3.- Date foreseen for validation DFM follow-up issue. Integral Corrective Action List 4 – Date of validation (closing) Page Open points Solutions / Action Who 1 2 3 4 P.3 Gate (mold flow) Waiting for confirmation. P.4 Parting line Waiting for confirmation. P.5 Slider Waiting for confirmation. P.6 Suggestion (thick plastic) Waiting for confirmation P.7 Draft angle Waiting for confirmation P.8 P.9 P.10 P.11 P.12 P.13 P.14 P.15 P.16 P.17
Gate(mold flow) Fill time 242 s 1822 1.214 06072 00000 Side gate 42 dow Scale 10 mm)
Gate (mold flow) Side gate
Parting line cavity are
Parting line Cavity Care
Slider Slide 2 Slide
Slider Slide_2 Slide_1
Suggestion(thick plastic) The element is too thick and it will cause sink mark air bubble
Suggestion (thick plastic) The element is too thick, and it will cause sink mark & air bubble
Draft angle IThe yellow colorsurface No draft angle 2. Where need texture? Please add enough draft angle for the texture. 3. For the ribs, side surface in the cavity/core and sliders, we will make a draft angle less than 2 degree(reduce plastic) But we will keep the tolerance
Draft angle 1.The yellow color surface No draft angle 3. For the ribs, side surface in the cavity/ core and sliders, we will make a draft angle less than 2 degree (reduce plastic). But we will keep the tolerance. 2. Where need texture? Please add enough draft angle for the texture
