Injection mold specification Client FUJI Model Name FUJI-XEROX Part name Part No 012b014630k001 DEM BIRD LI
-1- Client FUJI Model Name FUJI-XEROX Part Name Part No. 012b014630_k001 DFM BIRD LI Injection mold specification
ICAL CAL 1-Date of opening(all dates in2005 2-Date of beginning of action DFME Follow-up issue 3-Date foreseen for validation Integral Corrective Action List 4-Date of validation(closing) Page OPEN POINTS SOLUTIONSIAC TION WHO 3 3 Plastic Flow Analysis Please confirm pArting_line Please confirm 5 Slide Please confirm 6modify1 Please confirm 7 modify Please confirm 8 note Please confirm 10 11 12 13 15
-2- ICAL Page OPEN POINTS SOLUTIONS/ACTION WHO 1 2 3 4 3 Plastic Flow Analysis Please confirm. 4 Parting _ line Please confirm. 5 Slide Please confirm. 6 modify1 Please confirm. 7 modify2 Please confirm. 8 note Please confirm. 9 10 11 12 13 14 15 DFME Follow-up issue I C A L Integral Corrective Action List 1-Date of opening (all dates in2005) 2-Date of beginning of action 3-Date foreseen for validation 4-Date of validation (closing)
Plastic Flow Analysis 05110 0.3833 02555 0.1278 Side gate moldflow
-3- Plastic Flow Analysis Side gate
Parting_line cavit core Parting surface
-4- Parting _ line Parting surface cavity core
slide 12 mm
-5- 2mm slide
modify l all of these inside round Surfaces draft 1 (reduce plastIc)
-6- All of these inside round Surfaces draft 1º (reduce plastic). modify1
modify Ejection pin(04)
-7- Ejection pin(Ø4) modify2
note all of surfaces which in the cavity side and in the core side we will draft a angle less than 1(reduce plastic
-8- All of surfaces which in the cavity side and in the core side,we will draft a angle less than 1º(reduce plastic). note