Numerical Analysis Laboratory Projects 1. Input and Output Your program must read from file in.txt\(if there is any input) and write to a file \out.txt\in the current directory. 2. Judge Compiler

1.1 A Decision Tree Model and its Analysis 1.2 Another Decision Tree Model and it Analysis 1.3 The Need for a Systematic Theory of Probability 1.4 Exercises

一、化学结构与性质（化学性质与分析方法间的关系） 二、鉴别试验 三、特殊杂质检查 四、含量测定

In the chapter we shall present an introduction to nonlinear circuit analysis and shall examine a few interesting examples of that are used in practice. The principle of analysis will be emphasized. Graphical solution techniques will be given first. In addition, the basic concept of the phase plane shall be considered

In the chapter we first shall consider the nodal analysis and introduce the networks containing dependent sources. In addition later in the chapter we shall consider state(状态)- variable analysis

In this chapter we continue our introduction to circuit analysis by studying periodic functions in both the time and frequency domains. Any periodic function may be represented as the sum of an infinite number of sine and cosine functions which are harmonically related. The response of the linear network to the general periodic forcing function may be obtained by superposing the partial responses

• Introduction • Science and research • Open source  Software engineering data • Code analysis  Compiler  Partial program analysis  WALA, SOOT

In this chapter we will extend the concepts which have been presented in the preceding chapter so as to develop general methods of phasor analysis for circuits which are under conditions of sinusoidal steady-state excitation. The methods are very similar to those for resistance circuits which were presented in Chap.2

§9.1 Quantization Process and Error §9.2 A/D Conversion Noise Analysis §9.3 Signal-to-Quantization Noise Ratio §9.4 Limit Cycles in IIR Digital Filters

1 2.1 Process Dynamic Responses 2 2.2 Rational Approximations for Time Delay 3 2.3 Time Domain Performance Indices 4 2.4 Frequency Response Analysis 5 2.5 Transformation of Two Commonly Used Models 6 2.6 Design Requirements and Method Comparison