人教版高中生物必修3第3章 植物的激素调节第3节 其他植物激素习题(3)

§3–1 概 述 §3–2 基本术语 §3–3 形状精度设计基础 §3–4 位置精度设计基础 §3–5 公差原则 §3–6 形状与位置精度设计的基本方法

对CSP生产的700 MPa级高强钢板卷上表面氧化层进行了研究.发现钢卷沿卷长方向头部、中部氧化层主要由Fe+Fe3O4共析组织构成,而尾部则主要由Fe2O3层和Fe3O4层双层组织构成.沿板宽方向,边部的氧化层较厚,离边部越远,氧化层越薄.从边部到板宽中心,Fe2O3层和Fe3O4层的比例逐渐减少,Fe+Fe3O4共析组织逐渐增加,到距边部300 mm时氧化层几乎全部由Fe+Fe3O4共析组织构成.相较于CSP生产的SPHC钢,前者氧化层厚度对板卷厚度变化不太敏感

3-1 角度测量原理 3-2 水平角测量 3-3 竖直角测量 3-4 电子经纬仪的使用 3-5 经纬仪校验 3-6 角度测量误差分析及注意

The difference betWeen the systems of CaO-SiO2-H2O and CaO-SiO2-Al(OH)3-H2O, was studied,especially the effect of Al3+ on the crystallinity of tobermorite was focussed. As a result, in the system of CaO-SiO2-H2O, tobermorite formed early, howevey, with reaction time forward, tobermorite was replaced by xonotlite. So far as CaO-SiO2-Al(OH)3-H2O was concemed, hydrothermal reaction was carried out under the same condition as CaO-SiO2-H2O to study the morphological changes of tobermorite crystals. It was found that Al3+ accelerated the crystal growth of tobermorite to some extent and was in favor of platy crystals. Moreover, with the Al3+ content increasing in the starting material, the morphology of tobermorite did not change magnificently, but platy crystals became more and more eminent. As soon as the Al2O3