1、钢结构对材料的要求 （1） 较高的抗拉强度fu和屈服点fy （2） 塑性、冲击韧性好 （3） 冷加工性能好 （4） 可焊性好 （5） 耐久性好

❖关于体能的几个概念 ❖排球运动介绍 ❖排球运动员的体能特征 ❖排球运动员体能训练方法设计原则 ❖排球运动员主要体能训练方法

 噪声定义  共源放大器的噪声  源极跟随器的噪声  共栅放大器的噪声  电流镜的噪声  差分对的噪声  密勒CMOS OTA的噪声  容性噪声匹配  电压/电流检测器的噪声对比

理解组织、组织结构、管理幅度等概念 领会各种管理组织结构的特点、优缺点和适用范围 掌握组织结构的设计原则、组织运行中职责权限的确定 了解组织的变革与发展

 导言  跨阻放大器的并联-并联反馈  电流放大器的并联-串联反馈  低噪声和高频的跨阻放大器

 定义  电压放大器的串联-并联反馈  跨导放大器的串联-串联反馈

Computation of Stress, Crack width and Reflection of RC Flexural Members  Characteristics of use of reinforced concrete beam during the calculation.  The concept of transformed section and the geometric characteristics.  The stress state of reinforced concrete short-term checking.  Flexural members of the cracks and the maximum width of crack.  Deformation of flexural members.  Durability of concrete structures

bias components are the mechanical characteristics of cross sections and two failure modes, Boundaries and determine the size of bias conditions; Familiar with eccentric compression of the second-order effect and calculation; Eccentric rectangular cross-section bearing capacity of compression members is calculated, Including the formula, the formula of the applicable conditions of reinforcement and non-symmetrical Design and reinforcement of the cross-section symmetrical cross section for review; I-shaped, T shaped eccentric compression AND CIVIL ENGINEERING Calculation method; Circular section eccentric compression member cross section design and review; Eccentric compression reinforcement of the structure and reasonable layout requirements

 CMOS简单OTA  CMOS密勒OTA  CMOS对称OTA  CMOS折叠共源共栅OTA  其他运放

结构的功能要求与极限状态、作用与抗力、荷载与材料强度取值、结构的可靠度 一、结构的功能要求与极限状态 二、作用与抗力 三、荷载与材料强度取值 四、结构的可靠度