Surface quality is another aspect of machining accuracy. It consists of the surface finish and the physic mechanical state of the surface layer. It affects the proper functioning and service life of the parts Surface Finish Machining accuracy is expressed quantitatively in machining error. Surface finish is expressed quantitatively in surface roughness. The surface roughness on a machined workpiece surface is caused primarily by the geometrical factors(cutting tool geometry and cutting

目标:选定任一你感兴趣的发酵产品,如 ,A, 抗生素,淀粉酶,确定该菌种的筛选模型、 采样方式,稀释倍数和方法,确定特定产 物微生物的筛选方案及影响因素

1培养基的组成及配制 1.2种子培养基 培养基组成: 200ml:豆粉6g,饴糖1g,酵母膏0.2g,MSO40.4g,KH2P40.4g.放入高压灭菌锅,121℃,20min灭菌。 灭菌操作完毕,将上述物品并洗耳球转入超净台,接种前20min进行紫外空气灭菌。 1.3产酶培养基 培养基组成:

1、种子培养基(实验老师准备4个100ml种子) 2、产酶培养基确定(实验老师准备15瓶100ml产酶培养基和200ml已经长好 的种子),培养基的组成按上次实验配方设计

一、填空题: 1、碳的质量分数大于2.11%的铁碳合金称之为铸铁,通常还含有较多的Si、Mn、S、P等元素。 2、优质碳素结构钢的钢号是以碳的平均万分数来表示的

1、醋酸菌分离培养基:1%酵母膏,1%葡萄糖,pH4.5,琼脂2%,0.1MPa灭菌20分 钟。干热灭菌CaCO3。6个250ml三角瓶,各装10ml培养基。使用前分别加入3%无水乙 醇和2%CaCO3

The manufacturing(or production) process of a factory, in a broad sense, is the sum total of separate processes involved in the conversion of sum total raw materials or semi-finished products into final as far as products. AS far as a factory is concerned, its blank products can be blanks, finished parts

一、体自净:水体中的污染物因被稀释,水解,氧化,光分解和微生物降解等而去除的能力。 二、自净能力影响因素:溶氧 三、污染物过量---细菌和藻类大量繁殖---溶 解氧下----氧菌大量繁----带有恶臭的硫化氢和硫化铁

一、填空题: 1、碳的质量分数的铁碳合金称之为铸铁,通常还含有较多的Mn、等元素。 2、优质碳素结构钢的钢号是以来表示的。 3、碳钢常规热处理有四种

比拟放大:是把小型设备中进行科学实验所获得的成果在大生产设备中予以再现 ,它不是等比例放大,而是以相似论的方法进行放大