■ 控制系统校正的一般概念 ■ 串联校正 ■ 反馈校正 ■ 前馈校正 ■ 小结

In the chapter, we shall define the basic active and passive circuit models, explain power conventions and determine when power is delivered and absorbed, state Ohm's law and Kirchhoff's law, determine the equivalent resistance of a passive circuit containing only resistors

◼ 线性离散系统的基本概念 ◼ 离散时间函数的数学表达式及采样定理 ◼ Z变换 ◼ 线性常系数差分方程 ◼ 脉冲传递函数 ◼ 采样控制系统的时域分析 ◼ 采样控制系统的频域分析 ◼ 小结

◼ 非线性系统动态过程的特点 ◼ 非线性环节及其对系统结构的影响 ◼ 非线性特性的描述函数 ◼ 分析非线性系统的描述函数法 ◼ 改善非线性系统性能的措施及非线性特性的利用 ◼ 相平面法 ◼ 小结

1. 对自动控制系统的基本要求 2. 几种典型输入信号及响应之间的关系 3. 控制系统的暂态响应特性 4. 控制系统的稳定性 5. 控制系统的稳态误差

◼ 频率特性的基本概念 ◼ 非周期函数的频谱分析 ◼ 频率特性的表示方法 ◼ 典型环节的频率特性 ◼ 系统开环频率特性的绘制 ◼ 用频率法分析控制系统的稳定性 ◼ 系统暂态特性和开环频率特性的关系 ◼ 闭环系统频率特性 ◼ 系统暂态特性和闭环频率特性的关系

In the chapter we present resistive circuit analysis methods. The first is based on KCL and determines all the node-to-datum voltages in a given circuit and is known as node analysis. The second method, based on KVL, determines all loop current and is known as loop analysis. After discussing superposition, we will introduce Thevenin's and Norton's theorems

◼ 微分方程式的编写 ◼ 非线性数学模型线性化 ◼ 传递函数 ◼ 系统动态结构图 ◼ 系统传递函数和结构图的变换 ◼ 信号流图 ◼ 小结

In this chapter we introduce a circuit element that is very important in circuit design, the operational amplifier.This element will be used extensively in the studies of future chapters. Here we consider its use with resistors only to perform the algebraic functions of multiplication, addition and subtraction

In the chapter we shall introduce some two-terminal element which have properties, which are quite different than those of the resistor. These elements are the inductor and capacitor. The inductor and capacitor are passive elements, which are capable of storing and delivering finite amounts of energy