第一章 钢筋混凝土材料物理力学性能 第二章 钢筋混凝土结构设计方法 第三章 钢筋混凝土受弯构件正截面承载力计算 第四章 钢筋混凝土受弯构件斜截面承载力计算 第五章 钢筋混凝土受压构件承载力计算 第六章 钢筋混凝土受拉构件承载力计算 第七章 钢筋混凝土受扭构件承载力计算 第八章 钢筋混凝土构件裂缝宽度、变形和耐久性 第九章 预应力混凝土构件

第一节概述 一、概念 轴心受拉构件:当纵向拉力作用线与构件截面形心轴线相重合时的受力构件。 偏心受拉构件:当纵向拉力作用线偏离构件截面形心轴线,或者构件上既作用有拉力,同时又作用有弯矩时的受力构件。 二、工程上应用 在钢筋混凝土桥中,常见的受拉构件有:桁架拱桥中的拉杆,桁架梁桥中的拉杆等。 三、钢筋混凝土受拉构件中的主要钢筋 纵向钢筋:数量由计算确定。 箍筋:按构造确定

概述 斜裂缝、剪跨比及斜截面受剪破坏形态 斜截面受剪破坏的主要影响因素 斜截面受剪承载力的计算公式与适用范围 斜截面受剪承载力计算方法和步骤 保证斜截面受弯承载力的构造措施

Basic Concepts of Reinforced Concrete Structure and Physical and Mechanical Properties of Materials Basic Concepts of Reinforced Concrete(RC) Strength and deformation of concrete under various stress conditions Type ,Grade and Mechanical Properties of Steel Reinforcement Bond between concrete and steel reinforcement

Oblique cross-section flexural members of the mechanical characteristics and failure modes. Oblique section of bending members the main factor for shear strength. Flexural oblique shear strength formula for conditions. Such a high degree of web reinforcement beams of the preliminary design steps. Resisting moment mapping. Check all of bearing capacity and structural requirements. Construction oblique shear strength calculations

福州大学：《混凝土结构设计原理》课程教学资源（教案讲义）第六章 受压构件的截面承载力、第七章 受拉构件的截面承载力、第八章 受扭构件的扭曲截面承载力、第九章 变形、裂缝及耐久性

Computation of Stress, Crack width and Reflection of RC Flexural Members  Characteristics of use of reinforced concrete beam during the calculation.  The concept of transformed section and the geometric characteristics.  The stress state of reinforced concrete short-term checking.  Flexural members of the cracks and the maximum width of crack.  Deformation of flexural members.  Durability of concrete structures

bias components are the mechanical characteristics of cross sections and two failure modes, Boundaries and determine the size of bias conditions; Familiar with eccentric compression of the second-order effect and calculation; Eccentric rectangular cross-section bearing capacity of compression members is calculated, Including the formula, the formula of the applicable conditions of reinforcement and non-symmetrical Design and reinforcement of the cross-section symmetrical cross section for review; I-shaped, T shaped eccentric compression AND CIVIL ENGINEERING Calculation method; Circular section eccentric compression member cross section design and review; Eccentric compression reinforcement of the structure and reasonable layout requirements

With a longitudinal axis of steel stirrups and the general failure mode of compression members, bearing capacity; Longitudinal and spiral reinforcement with stirrups failure modes of axial The concept of stability factor and its influencing factors; Analysis of the core concrete strength and strength calculation; Ordinary hoops column, spiral column reinforcement stirrup features and construction requirements

Principle of Structure Design and Calculation Based on Probabilostic Limit State Method History and basic concept of methods for calculation and design Functional requirement of structure Conception of limit state, probabilistic limit state design method Design method, principles, expressions and factors of existing Codes Strength of Materials, action classifications, action combination