 定义：HD, IM, 交调点  MOS管的非线性 单端放大器 差分放大器  双极型晶体管的非线性  负反馈能够减小非线性  运算放大器的非线性  其他非线性和准则

一.场地调研 1.样地介绍 2.样方介绍 3.植被状况介绍 4.其他自然条件介绍 5.休闲游憩现状调研 二.场地分析 1.生态分析 2.休闲游憩分析

 噪声定义  共源放大器的噪声  源极跟随器的噪声  共栅放大器的噪声  电流镜的噪声  差分对的噪声  密勒CMOS OTA的噪声  容性噪声匹配  电压/电流检测器的噪声对比

理解组织、组织结构、管理幅度等概念 领会各种管理组织结构的特点、优缺点和适用范围 掌握组织结构的设计原则、组织运行中职责权限的确定 了解组织的变革与发展

 导言  跨阻放大器的并联-并联反馈  电流放大器的并联-串联反馈  低噪声和高频的跨阻放大器

 定义  电压放大器的串联-并联反馈  跨导放大器的串联-串联反馈

Computation of Stress, Crack width and Reflection of RC Flexural Members  Characteristics of use of reinforced concrete beam during the calculation.  The concept of transformed section and the geometric characteristics.  The stress state of reinforced concrete short-term checking.  Flexural members of the cracks and the maximum width of crack.  Deformation of flexural members.  Durability of concrete structures

bias components are the mechanical characteristics of cross sections and two failure modes, Boundaries and determine the size of bias conditions; Familiar with eccentric compression of the second-order effect and calculation; Eccentric rectangular cross-section bearing capacity of compression members is calculated, Including the formula, the formula of the applicable conditions of reinforcement and non-symmetrical Design and reinforcement of the cross-section symmetrical cross section for review; I-shaped, T shaped eccentric compression AND CIVIL ENGINEERING Calculation method; Circular section eccentric compression member cross section design and review; Eccentric compression reinforcement of the structure and reasonable layout requirements

福州大学：《混凝土结构设计原理》课程教学资源（教案讲义）第六章 受压构件的截面承载力、第七章 受拉构件的截面承载力、第八章 受扭构件的扭曲截面承载力、第九章 变形、裂缝及耐久性

 CMOS简单OTA  CMOS密勒OTA  CMOS对称OTA  CMOS折叠共源共栅OTA  其他运放