第六章定积分 (The definite integration) 第十四讲定积分概念及性质 课后作业: 阅读:第六章6.1,6.2:pp158--166 预习:6.3,6.4:6--182 练习pp.66-16:习题6.2:1,(1),(3)23,(1);4,(1)(3)(5) 5,(1),(5) 作业p.166168:习题6.2:1,(5);3,(2)4,(2),(4),(6); 5,(2),(3),(6);6;7. 6-1定积分概念与性质 6-1-1问题引入 一定积分(Riemann)的背景:两个曲型问题。 (1)求曲线所围的面积: 函数f(x)在有界区间[a,b]非负连续,由Ox轴、直线x=a、 x=b(a
文档格式：PDF 文档大小：733.5KB 文档页数：10
根据炉渣结构的共存理论和CaO-SiO2渣系相图制定了不同温度区间的作用浓度计算模型。在炼钢温度下计算结果表明,考虑2个硅酸盐(CaSiO3和Ca2SiO4)或3个硅酸盐(CaSiO3,Ca2SiO4和Ca3SiO5)的计算模型都是合用的。比较不同计算方案结果证明,用本文回归所得的热力学数据比用文献数据更能符合实际,所以对文献数据应进一步研究。硅酸盐作用浓度的最大值与相图中固液相同成分熔点的位置一致,说明硅酸盐对本渣系的熔点具有极为重要的影响,炉渣总质点数随碱度而变化中出现最小值的原因是炉渣中进行了多个结构质点结合成一个分子的反应
文档格式：PPT 文档大小：829KB 文档页数：20
引子 一、 MasterCAM的应用领域,主要是针对加工 1.在模具业,加工对象常是一些面,尤其是曲面 2.3D曲面是在3D线框模型的基础上获得,3D模型都是用2D绘图完成 3.Curve曲线,2D曲线直观、简单,3D曲线具有复杂性,但可理解成:曲线是在曲 面上。 4.先讲曲面,再讲曲线
文档格式：PDF 文档大小：420.84KB 文档页数：6
High temperature corrosion tests in 75%Na2SO4-25%. NaCl molten salt have been conducted on waspalloy specimens plasma sprayed with Co-Cr-B-Si, Ni-Cr-B-Si-hCr3C2, X-40, X-40 + TiC and Ni/Al + Al2O3 coatings, test coupons were exposed isothermally at 750℃up to 200 h. After the corrosion tests, each sample was examined by OM, SEM and EMPA. It was found that X-40, X-40 + TiC and Ni/Al + Al2O3 were violently corroded by the molten salt due to cracking and spalling of the coatings, whereas Co-Cr-B-Si and Ni-Cr-B-Si + Cr3C2 exhibited superior corrosion resistance, which were thought to be related to the formation of chromium and silicon oxide film. A possible corrosion mechanism had been proposed and it is suggested that the excellent corrosion resistance and high hot-hardness of the two B-Si containing coatings may be of significance for applications in petroleum refining industry as
