点击切换搜索课件文库搜索结果(470)
文档格式:PPT 文档大小:1.07MB 文档页数:28
一、废气涡轮增压器的构造 组成:废气涡轮、离心式压气机 分类:轴流式涡轮增压器(大中型机用)、径流式涡轮增压器(中小型机用) 发展:1978年以前提高增压比,以后提高效率为主
文档格式:PPT 文档大小:196KB 文档页数:9
第五节增压系统的维护及故障排除M 一、增压系统的维护管理 1增压器的日常管理 (1)运行中注意参数的测量、记录和调整 (2)运行时注意运转是否平稳和有无异常声响。听到钝重的嗡嗡声说明增压器失去动平衡 (3)特别注意轴承的润滑
文档格式:PPT 文档大小:870KB 文档页数:26
换气机构:保证柴油机按规定顺序和时刻完 成进、排气过程的机构 组成:气阀机构、气阀传动机构、凸轮轴和 凸轮轴传动机构 作用:定时启闭气阀,保证柴油机工作过程 连续和完善
文档格式:PPT 文档大小:617.5KB 文档页数:16
一、混合气的形成方法 1空间雾化混合:利用燃油雾化和涡动。 船用大中型机和低速机主要依赖燃油的喷雾(油雾法)。因此对喷射设备要求高(如高压喷射、多孔喷射)。-中小型机和高速机主要依赖空气涡动(涡动法)。因此要求形成空气涡动,喷射压力低。大多数机使用
文档格式:PPT 文档大小:850.5KB 文档页数:44
一、燃油喷射系统 二、燃油的喷射过程 三、供油规律和喷油规律 四、异常喷射及其消除方法 五、最低稳定转速 六、燃油雾化
文档格式:PPT 文档大小:340.5KB 文档页数:18
一、可燃混合气的着火 燃烧过程必须经历形成可燃混合气、可燃混合气自行着火(自燃)和稳定燃烧(火焰的传播)三个阶段
文档格式:PPT 文档大小:3.32MB 文档页数:11
第一节柴油机的总体结构 一、柴油机的基本组成 1.主要固定件 (1)组成:机座、机架、气缸(气缸套、气缸体)、气缸盖等
文档格式:DOC 文档大小:66KB 文档页数:3
Ship motions Ship motions are defined by the movements from the equilibrium position of the ship's centre of gravity along the three axes shown in Figure and by rotations about axes approximately parallel to these. The linear displacements along the horizontal
文档格式:DOC 文档大小:191KB 文档页数:5
The basis for ship equilibrium Consider a ship floating upright on the surface of motionless water. In order to be at rest or in equilibrium, there must be no unbalanced forces or moments acting on it. There are two forces that maintain this equilibrium (1) the force of gravity, and (2) the force of buoyancy
文档格式:DOC 文档大小:58KB 文档页数:6
1.1 Definition The general arrangement of a ship can be defined as the assignment of spaces for all the required functions and equipment, properly coordinated for location and access. Four consecutive steps characterize general arrangement; namely, allocation of main spaces, setting
首页上页3738394041424344下页末页
热门关键字
搜索一下,找到相关课件或文库资源 470 个  
©2008-现在 cucdc.com 高等教育资讯网 版权所有