用热丝法研究了WC-6%Co硬质合金刀片金刚石薄膜涂层附着力。结果表明:采用温度为80℃,(HCl:HNO3:H2O)(体积比)为1:1:1溶液对硬质合金刀片表面去Co 15min后,经40μm金刚石粉及1.5μm金刚石加20μmTaC混合粉进行超声预处理,结果表明,沉积的金刚石薄膜与硬质合金刀片基底具有良好的附着力,而经40μm金刚石粉处理的薄膜涂层组织与附着力要好一些

1. Constant Power and Thrust: Prescribed Mission Time Starting with a mass M0 , and operating for a time t an electric thruster of jet speed c, such as to accomplish an equivalent (force-free) velocity change of ∆V , the final

第二节三重积分 一、三重积分的概念及性质 例.非均匀分布立体的质量 一设有空间立体g2,当Ω的质量是均匀分布时, 则的质量M=9的体密度×?的体积 若Ω的质量不是均匀分布的则不能上述方 式算质量M 设空间立体Ω.其质量非均匀分布,体密度 μ(x,y,z)连续,求的质量M

用磁控溅射镀膜方法，制成了巨磁电阻自族间多层膜Ta/NiFe/Cu/NiFe/FeMn/Ta.它具有优良的特性.其室温磁电阻比率MR＞2%，自由层矫顽力Hc1<160A/m，自由层零磁场漂Hf<800A/m和钉扎层交换场Hex≈20×103 A/m.作为新型磁功能材料，它满足高灵敏磁性传感器和硬盘读出头的要求.对多层膜制备的方法也作了系统研究，并讨论了缓冲层和钉扎层的制备工艺和微结构对磁性能的影响

21.1 MATLAB Environment 21.2 Example 1: Signal Analysis Delores M. Etter 21.3 Example 2: Filter Design and Analysis

维里定理: 设容器中包含N个质量为m相同的分子,每个分子遵守古典

确定局部损失系数的实验方法 例用U形压差计测量水平放置弯管的局部损 失系数。已知d=0.25m,Q=0.04m3/s,U 形管工作液体的密度P=1600kg/m3。如果 测得△h=70mm,试计算5 解忽略沿程损失,对1和2断面列出伯努利方程

Ⅱ. Listening skills W: From what i can remember the director asked us to rehearse this a hundred times M: One hundred times? Is the director out of his mind Q: What does the man imply? 2. M: Do you think we have made enough food for the party? w: The refrigerator is about to explode Q: What does the woman imply? 3. w: She said she might become a famous movie star M: Yes, and pigs might fly

#include void maino double f1=2e+8 double f2=3.14159 printf“输出各种格式的数据:m”)

Chapter Four High-level Programming Languages e Part 1 Notes to Text m Part4 Extensive Reading o Part 2 Word Study Part5 Notes to Passage s Part3 Practice on Text Part6 Practice on Passage