5.2 Operation
5.2 Operation
5.2 Operation Safety regulations all centrifugal separators the bowl rotates at a very high speed, normally between 100 and 150 revolutions per second. Thus, very great forces are released and it is essential. therefore. to follow strictly the directions given in the Instruction Book concerning assembly of parts, starting, stopping and overhaul
5.2 Operation Safety regulations • In all centrifugal separators the bowl rotates at a very high speed, normally between 100 and l50 revolutions per second. Thus, very great forces are released and it is essential, therefore, to follow strictly the directions given in the Instruction Book concerning assembly of parts, starting, stopping and overhaul
5.2 Operation Safety regulations In this connection remember particularly to tighten the bowl lock ring(lock rings) to fasten carefully the frame hood as well as the inlet and outlet parts
5.2 Operation Safety regulations • In this connection remember particularly: • ... to tighten the bowl lock ring (lock rings), • ... to fasten carefully the frame hood as well as the inlet and outlet parts
5.2 Operation Safety regulations to check the speed that no machine part must be loosened until the bowl has toppe ed rotatin that bowl body bowl hood and lock ring must never be heated by means of a flame ·…. that the machine must never be used for processing liquids with a higher density (temperature, sludge nature etc. )than that for which it was originally intended
5.2 Operation Safety regulations • ... to check the speed, • ... that no machine part must be loosened until the bowl has topped rotating , • ... that bowl body, bowl hood and lock ring must never be heated by means of a flame, • ... that the machine must never be used for processing liquids with a higher density (temperature, sludge nature etc. ) than that for which it was originally intended
End of Chapter 5
End of Chapter 5
