Under appropriate cooling condition, intcrfacial phase appeared between α and β phases in Ti-5Al-2M0-3Zr alloy. Its thickness could reach 100 nm. The interfacial phase was either single layer structure or double layer structure. The monolithic layer adjacent to 3 phase was indentified as fee structure with relationship （110）β// （001）m, [11$\\mathop 1\\limits^{{\\rm{ - - }}} $]β /[110]m. The striated layer adjacent to a phase was indentified as hep with twin relationship {10$\\bar 1$1}<1$\\bar 0$12> to α. Thus, the study provided a new experimental fact for the controversial topic on structure of striated layer. Chemical composition of interfacial phase varied slightly with heat treatments, but always between that of α and β phases

第3章 MATLAB程序设计 3.1M文件 3.2程序控制结构 3.3函数文件 3.4程序举例 3.5程序调试

2、动载系数Kv 2..2 3~10为第公差组精度等级 2.( 10 1 1.6 1. 1.2 主共振区 1.0 2 4 6 8 10121116 v·Z1/100(m/s) (a)用于直齿轮

8.3多进制数字调制 多进制:码元的状态数>2 多(M)进制调制的特点

第二章向量空间与矩阵 第一节m维向量空间 2.1.1向量和m维向量空间的定义及性质

为研究热轧润滑对板带钢热轧后表面质量的影响,对不同润滑条件下板带钢热轧后表面氧化情况进行了观察研究。结果表明：通过热轧润滑可以明显改善表面质量。油水混合润滑条件下,钢板表面的氧化铁皮仅有5μm,比纯水润滑条件下氧化层厚度平均减薄3μm左右,比无润滑平均减薄7μm左右。同时,对轧后的表面形貌进行了观察,可以看到在油水混合润滑条件下钢板轧后表面有清晰的轧制纹络存在

3.1M文件 3.2程序控制结构 3.3函数文件 3.4程序举例 3.5程序调试

Chapter Four High-level Programming Languages e Part 1 Notes to Text m Part4 Extensive Reading o Part 2 Word Study Part5 Notes to Passage s Part3 Practice on Text Part6 Practice on Passage

#include void maino a[4][3],iJ, float ave, b( 4]: printf(“请输入一个4行3列的整数矩阵:m”)

#include void maino int n=I printi(40以内能同时被3和4整除的数有:m”)