4.5 其他二元相图 4.5.1 形成化合物的二元相图 4.5.2 具有三相平衡恒温转变的其他二元相图 4.5.3 具有有序-无序转变的相图 4.6 二元相图的分析方法 4.6.1 复杂二元相图的分析方法 4.6.2 二元相图分析实例 4.6.3 相图与合金的性能 4.7.1 铸锭（件）的组织 4.7.2 铸锭（件）组织的控制 4.7.3 铸锭（件）中的偏析 4.8.1 溶体的自由能-成分曲线 4.8.2 异相平衡的条件 4.8.3 由二元系各相的自由能曲线绘制相图

Understanding materials, their properties and behavior is fundamental to engineering design, and a key application of materials science. Written for all students of engineering, materials science and design, this book describes the procedures for material selection in mechanical design in order to ensure that the most suitable materials for a given application are identified from the full range of materials and section shapes available. Extensively revised for this fourth edition, Materials Selection in Mechanical Design is recognized as one of the leading materials selection texts, and provides a unique and genuinely innovative resource

Chapter 1 Introduction Chapter 2 Manufacture of 3D Fibre Preforms Chapter 3 Preform Consolidation Chapter 4 Micromechanics Models for Mechanical Properties Chapter 5 3D Woven Composites Chapter 6 Braided Composite Materials Chapter 7 Knitted Composite Materials Chapter 8 Stitched Composites Chapter 9 Z-Pinned Composites

This is the first book that can be considered a textbook on thin film science, complete with exercises at the end of each chapter. Ohring has contributed many highly regarded reference books to the AP list, including Reliability and Failure of Electronic Materials and the Engineering Science of Thin Films. The knowledge base is intended for science and engineering students in advanced undergraduate or first-year graduate level courses on thin films and scientists and engineers who are entering or require an overview of the field. Since 1992, when the book was first published, the field of thin films has expanded tremendously, especially with regard to technological applications. The second edition will bring the book up-to-date with regard to these advances. Most chapters have been greatly updated, and several new chapters have been added

7.1 相图的表示和测定方法 7.1.1 二元相图的表示法 7.1.2 二元相图的测定方法 7.1.3 二元相图的线、区 7.2 相图热力学的基本要点 7.2.1 固溶体的自由能-成分曲线 7.2.2 多相平衡的公切线原理 7.2.3 混合物的自由能与杠杆法则 7.2.4 从自由能-成分曲线推测相图 7.2.5 二元相图的几何规律 7.3 二元相图分析 7.3.1 匀晶相图和固溶体凝固 7.3.2 共晶相图及合金凝固

7.3.3 包晶相图及其合金凝固 7.3.4 溶混间隙相图与调幅分解 7.3.5 其他类型的二元相图 7.3.6 复杂二元相图的分析方法 7.3.7 根据相图推测合金的性能

第一节 三元相图的基础知识 第二节 三元匀晶相图 第三节 固态互不溶解的三元共晶相图 第四节 固态下有限互溶的三元相图 第五节 其它类型三元相图 第六节 三元相图(总结)

9.1 烧结(Sintering) 9.1.1 烧结的驱动力(Driving force for sintering) 9.1.2 烧结过程(Sintering process) 9.1.3 颗粒的粘附作用(Interparticle adherence) 9.1.4 物质的传递(Transport phenomenon) 9.1.5 再结晶和晶粒长大(Recrystallization and grain growth) 9.2 聚合( Polymerization) 9.2.1逐步聚合(Step polymerization) 9.2.2连锁聚合 (Chain polymerization)

7.1 相图的表示和测定方法 7.1.1 二元相图的表示法 7.1.2 二元相图的测定方法 7.1.3 二元相图的线、区 7.2 相图热力学的基本要点 7.2.1 固溶体的自由能（G）—成分（%）曲 7.2.2 多相平衡的公切线原理 7.2.3 混合物的自由能 7.2.4 从G—成分曲线推测相图 7.2.5 二元相图的几何规律 7.3 二元相图分析 7.3.1 匀晶相图和固溶体凝固 7.3.2 共晶相图及合金凝固

8.3.1 共晶转变机制 8.3.2 共晶组织形貌 8.3.3 亚共晶和过共晶合金初生相形态 8.3.4 共晶系合金的非平衡结晶 1伪共晶 2 离异共晶 3 固溶体合金中的共晶组织