ME 371 cam Homework 7 Due in class on NOV.10,2014 CID: Name: Please use A4 size paper and staple them together. Probleml: Find the pressure angle at the point D of following cam mechanisms 0 D Problem 2: In Fig.P6.5,the displacement-time,velocity-time,and acceleration-time curves are sketched for a follower.The cam rotates at a constant angular velocity wand the maximum(peak)value of the acceleration is 5 units.The equation for the acceleration-time curve is as follows: A- B2 sin (a)Write the equations for the velocity-time and displacement-time curves. (b)Determine the maximum values of displacement and velocity
ME 371 cam Homework 7 Due in class on NOV. 10, 2014 CID: Name: Please use A4 size paper and staple them together. Problem1: Find the pressure angle at the point D of following cam mechanisms Problem 2:
(c) Fig 6-5 Problem 3: Design a double-dwell cam to move a follower from0to2.5"in60°,dwell for 120°, fall 2.5"in 30 and dwell for the remainder.The total cycle must take 4 sec.Choose suitable programs for rise and fall to minimize accelerations.Plot the s y a j diagrams. (using software Dynacam on the course website.Don't forget to change the program's property to XP compatible mode and administrative way after installation on a 64-bit OS)
Fig 6-5 Problem 3: (using software Dynacam on the course website. Don’t forget to change the program’s property to XP compatible mode and administrative way after installation on a 64-bit OS)