D-M-E Master nit Die MUD Quick-Change TM Mold frames Inserts for H a double H-style HAAFE D-M-E
D-M-E Master Unit Die Quick-Change™ Mold Frames & Inserts for H & Double H-Style hframe_v23 7/25/05 3:01 PM Page 1
Table of Contents rame H Frame Ordering Information HF 3 Insert Mold Ordering Information HF 3 Quick-Change H Frame Features, Options and Applications HF 4 Companion Insert Mold Features, Options and Applications 07/07 Quick-Change HF Companion Insert Molds (3. 25 x 3. 15) HF 6 08/09 Quick-Change HF Companion Insert Molds(5.0 x 3.5) HF 7 10/12 Quick-Change HF Companion Insert Molds (5.0 x 5.0) HF 8 10/18 Quick-Change HF Companion Insert Molds (5.0 x 8.0) 11/14 Quick-Change HF Companion Insert Molds (6.0 x 6.0) HF 10 11/18 Quick-Change HF Companion Insert Molds (6.0 x 8.0) HF 11 12/11 Quick-Change HF Companion Insert Molds (7.0 x 4.5) HF 12 12/13 Quick-Change HF Companion Insert Molds (7.0 x 5.5) HF 13 12/15 Quick-Change HF Companion Insert Molds(7.0 x 6.5) 12/19 Quick-Change HF Companion Insert Molds (7.0 x 8.5) 13/13 Quick-Change HF Companion Insert Molds (8.0 x 5.5) HF 16 13/15 Quick-Change HF Companion Insert Molds (8.0 x 6.5) HF 17 13/17 Quick-Change HF Companion Insert Molds(8.0 x 7.5) 13/19 Quick-Change HF Companion Insert Molds (8.0 x 8.5) 13/23 Quick-Change HF Companion Insert Molds (8.0 x 10.5) 14/15 Quick-Change HF Companion Insert Molds (9.0 x 6.5) HF 21 14/17 Quick-Change HF Companion Insert Molds (9.0 x 7.5) HF 22 14/19 Quick-Change HF Companion Insert Molds (9.0 x 8.5) 14/21 Quick-Change HF Companion Insert Molds (9.0 x 9.5) 14/25 Quick-Change HF Companion Insert Molds (9.0 x 11.5) 15/15 Quick-Change HF Companion Insert Molds (10.0 x 6.5) HF 26 15/17 Quick-Change HF Companion Insert Molds (10.0 x 7.5) HF 27 15/19 Quick-Change HF Companion Insert Molds (10.0 x 8.5) 15/21 Quick-Change HF Companion Insert Molds (10.0 x 9.5) 15/25 Quick-Change HF Companion Insert Molds (10.0 x 11.5) HF 30 17/19 Quick-Change HF Companion Insert Molds (11.0 x 8.5) 17/26 Quick-Change HF Companion Insert Molds (11.0 x 12.0) HF 32 18/22 Quick-Change HF Companion Insert Molds (12.0 x 10.0 18/26 Quick-Change HF Companion Insert Molds (12.0 x 12.0) 18/30 Quick-Change HF Companion Insert Molds (12.0 x 14.0) HF 35 Insert Mold Pillar Post For H and Double h frames HF 36 Double H Frame Double H Frame Ordering Information... Insert Mold Ordering Information Quick-Change TM H Frame Features, Options and Applications DF 38 Companion Insert Mold Features, Options and Applications DF 39 12/08 Quick-Change DF Companion Insert Molds(3. 25 x 3. 15) 40 16/09 Quick-Change DF Companion Insert Molds (5.0 x 3.5) 16/12 Quick-Change DF Companion Insert Molds (5.0 x 5.0) 16/18 Quick-Change DF Companion Insert Molds (5.0 x 8.0) DE 43 20/14 Quick-Change DF Companion Insert Molds (6.0 x 6.0) DF 44 22/19 Quick-Change DF Companion Insert Molds (7.0 x 8.5) 24/23 Quick-Change DF Companion Insert Molds(8.0 x 10.5) E Frame E" Style Mold Frame Companion Insert Molds MASTER U.S.800-626-6653 UNIT DE Canada 800-387-6600- Europe 32-15-215011
U.S. 800-626-6653 ■ www.dme.net Canada 800-387-6600 ■ Europe 32-15-215011 HF 2 Table of Contents H Frame Ordering Information................................................................................................................HF 3 Insert Mold Ordering Information.........................................................................................................HF 3 Quick-Change™ H Frame Features, Options and Applications ..............................................HF 4 Companion Insert Mold Features, Options and Applications .................................................HF 5 07/07 Quick-Change HF Companion Insert Molds (3.25 x 3.15) .................................................. HF 6 08/09 Quick-Change HF Companion Insert Molds (5.0 x 3.5) ...................................................... HF 7 10/12 Quick-Change HF Companion Insert Molds (5.0 x 5.0) ...................................................... HF 8 10/18 Quick-Change HF Companion Insert Molds (5.0 x 8.0) ...................................................... HF 9 11/14 Quick-Change HF Companion Insert Molds (6.0 x 6.0) .................................................... HF 10 11/18 Quick-Change HF Companion Insert Molds (6.0 x 8.0) .................................................... HF 11 12/11 Quick-Change HF Companion Insert Molds (7.0 x 4.5) .................................................... HF 12 12/13 Quick-Change HF Companion Insert Molds (7.0 x 5.5) .................................................... HF 13 12/15 Quick-Change HF Companion Insert Molds (7.0 x 6.5) .................................................... HF 14 12/19 Quick-Change HF Companion Insert Molds (7.0 x 8.5) .................................................... HF 15 13/13 Quick-Change HF Companion Insert Molds (8.0 x 5.5) .................................................... HF 16 13/15 Quick-Change HF Companion Insert Molds (8.0 x 6.5) .................................................... HF 17 13/17 Quick-Change HF Companion Insert Molds (8.0 x 7.5) .................................................... HF 18 13/19 Quick-Change HF Companion Insert Molds (8.0 x 8.5) .................................................... HF 19 13/23 Quick-Change HF Companion Insert Molds (8.0 x 10.5) .................................................. HF 20 14/15 Quick-Change HF Companion Insert Molds (9.0 x 6.5) .................................................... HF 21 14/17 Quick-Change HF Companion Insert Molds (9.0 x 7.5) .................................................... HF 22 14/19 Quick-Change HF Companion Insert Molds (9.0 x 8.5) .................................................... HF 23 14/21 Quick-Change HF Companion Insert Molds (9.0 x 9.5) .................................................... HF 24 14/25 Quick-Change HF Companion Insert Molds (9.0 x 11.5) .................................................. HF 25 15/15 Quick-Change HF Companion Insert Molds (10.0 x 6.5) .................................................. HF 26 15/17 Quick-Change HF Companion Insert Molds (10.0 x 7.5) .................................................. HF 27 15/19 Quick-Change HF Companion Insert Molds (10.0 x 8.5) .................................................. HF 28 15/21 Quick-Change HF Companion Insert Molds (10.0 x 9.5) .................................................. HF 29 15/25 Quick-Change HF Companion Insert Molds (10.0 x 11.5) ................................................ HF 30 17/19 Quick-Change HF Companion Insert Molds (11.0 x 8.5) .................................................. HF 31 17/26 Quick-Change HF Companion Insert Molds (11.0 x 12.0) ................................................ HF 32 18/22 Quick-Change HF Companion Insert Molds (12.0 x 10.0) ................................................ HF 33 18/26 Quick-Change HF Companion Insert Molds (12.0 x 12.0) ................................................ HF 34 18/30 Quick-Change HF Companion Insert Molds (12.0 x 14.0) ................................................ HF 35 Insert Mold Pillar Post For H and Double H Frames................................................................. HF 36 Double H Frame Ordering Information.............................................................................................DF 37 Insert Mold Ordering Information.......................................................................................................DF 37 Quick-Change™ H Frame Features, Options and Applications ............................................DF 38 Companion Insert Mold Features, Options and Applications ...............................................DF 39 12/08 Quick-Change DF Companion Insert Molds (3.25 x 3.15) ................................................ DF 40 16/09 Quick-Change DF Companion Insert Molds (5.0 x 3.5) .................................................... DF 41 16/12 Quick-Change DF Companion Insert Molds (5.0 x 5.0) .................................................... DF 42 16/18 Quick-Change DF Companion Insert Molds (5.0 x 8.0) .................................................... DF 43 20/14 Quick-Change DF Companion Insert Molds (6.0 x 6.0) .................................................... DF 44 22/19 Quick-Change DF Companion Insert Molds (7.0 x 8.5) .................................................... DF 45 24/23 Quick-Change DF Companion Insert Molds (8.0 x 10.5) .................................................. DF 46 "E" Style Mold Frame Companion Insert Molds....................................................................... EF 47 H Frame Double H Frame E Frame hframe_v23 7/25/05 3:01 PM Page 2
HF 3 Frame Ordering Information Item Number and description (see tables on respective page) S" diameter of locating ring supplied standard (see illustrations on respective page Sprue specification"R"spherical radius of sprue bushing furnished 1/2 or 3/4 unless otherwise shown 0"small diameter of sprue bushing orifice furnished 5/32, 7/32, 9/32or 11/32 unless otherwise shown Optional locating rings available on request Knockout hole location standard as shown(others optional) Runner size and description STANDARD SOLID INSERT MOLD Cutouts in master ejector plate for insert mold pillar posts standard as shown spective page Clamp slots standard unless otherwise shown on respective page Mounting holes optional unless shown on respective page Frames standard in prehard steel with hardened steel center section prehard stainless and other steel grades available (quotation on request) Insert Mold Ordering Information STANDARD LAMINATED Item number and description (see tables on respective page INSERT MOLD Steel grades-1020, 4130 prehard, P-20 prehard and H-13: 420 stainless H-13 and other tool steel insert molds supplied 010 oversize on outside dimensions. .010-.013 oversize on thickness and 025-.035 undersize in the pin and bushing holes for machining after required heat treating A" and"B"dimensions supplied .004-.007 oversize unless NOTE: The" A" and"B" dimensions for insert mold must match those of the E-STYLE LAMINATED INSERT MOLD U.S.80o-626-6653m dme. net MASTER Canada800-387-6600 Europe32-15-215011 UNIT DE
U.S. 800-626-6653 ■ www.dme.net Canada 800-387-6600 ■ Europe 32-15-215011 HF 3 Frame Ordering Information • Item Number and description (see tables on respective page) • “S” diameter of locating ring supplied standard (see illustrations on respective page) • Sprue specification “R” spherical radius of sprue bushing furnished 1/2" or 3/4" unless otherwise shown • “O” small diameter of sprue bushing orifice furnished 5/32", 7/32", 9/32"or 11/32", unless otherwise shown • Optional locating rings available on request • Knockout hole location standard as shown (others optional) • Runner size and description • Cutouts in master ejector plate for insert mold pillar posts standard as shown on respective page • Clamp slots standard unless otherwise shown on respective page • Mounting holes optional unless shown on respective page • Additional ejection height available (quotation on request) • Frames standard in prehard steel with hardened steel center section; prehard stainless and other steel grades available (quotation on request) Insert Mold Ordering Information • Item number and description (see tables on respective page) • Steel grades – 1020, 4130 prehard, P-20 prehard and H-13: 420 stainless and other grades on request • H-13 and other tool steel insert molds supplied .010 oversize on outside dimensions, .010 – .013 oversize on thickness, and .025 – .035 undersize in the pin and bushing holes for machining after required heat treating • “A” and “B” dimensions supplied .004 – .007 oversize unless otherwise specified NOTE: The “A” and “B” dimensions for insert mold must match those of the companion H frame. STANDARD SOLID INSERT MOLD STANDARD LAMINATED INSERT MOLD E-STYLE LAMINATED INSERT MOLD hframe_v23 7/25/05 3:02 PM Page 3
Quick-Change H frame features and applications This MUD Quick-Change frame series features a center runner bar for simultaneous molding with two standard-style companion insert molds The series offers cost reduction benefits and time-saving advantages similar Quick-Change to the U frame series. It also provides comparable design flexibility. H frame options The two companion insert molds for H frames can be changed independently Spring-loaded master ejector plates and individually. a dummy insert is supplied for single insert mold production Interlocking ejector rails This results in exceptional versatility for tailoring schedules to virtually all inventory requirements including just-in-time delivery Additional height on ejector rails Early return on ejector system H frames also offer special advantages for high volume production. Two insert Special knockout hole locations molds permit doubling quantities for each molding cycle. Also, there is virtually no need to interrupt production for maintenance or repair since inexpensive Runner shutoffs backup insert molds can be quickly installed Choice of runner configuration H frames are supplied with hardened center runner bars and replaceable Frame spacer bars sprue puller pin assemblies. Each frame includes a locking locating ring and an integral master ejector plate with cutouts to allow installation of insert mold Additional retainer slot pillar posts. The master ejector plate is also supplied with positive aligning guide and spacer plate posts, bushings and grease fittings for a guided ejector system Extended loading rails Options include interlocking ejector rails to lock the insert mold's ejector system Water lines for center sections to the master ejector plate. The master ejector plate can be spring loaded for Water lines for rails and plates returning the insert mold s ejector system. It can also be tied to the machi nydraulic knockout system for stroking the insert molds ejector assembly. Machining for cartridge heaters Manifold for hot runner operation Other options include water lines in the center bar or other locations, insulation boards, runner shutoffs and hot sprue bushings. Frame spacer bars to accom- modate shorter, more economical companion insert molds are available for Armorclad plating frames designed for longer sizes. Additional retainer slots and a spacer Electroless nickel plating plate in the frame's cavity half allow the frame to accept insert molds with different thicknesses Armorclad" is a registered trademark of Armorclad Inc Quick-Change Hot Runner Molding NOTE: Specifications subject to change All of the advantages of the MUD Quick-Change Concept can be added to a without prior notice hot runner molding system with the addition of a manifold to the h frame. Both the frame and the hot runner system remain in the molding machine. Only the insert molds are changed to produce new parts, just as in other Quick-Change applications. This means faster changeovers, lower tooling costs and greater scheduling flexibility for hot runner molding Steel specifications: Standard frames are produced in prehard steel (285-325 Brinell) with hardened center sections. frames are also available in prehard stainless, 420 stainless, H-13 and other grades on request. Armorclad* Number One can be speci Armorclad" is a registered trademark of Armorclad, In MASTER U.S.800-626-6653 UNIT DE Canada 800-387-6600- Europe 32-15-215011
U.S. 800-626-6653 ■ www.dme.net Canada 800-387-6600 ■ Europe 32-15-215011 HF 4 Quick-Change H frame features and applications This MUD® Quick-Change frame series features a center runner bar for simultaneous molding with two standard-style companion insert molds. The series offers cost reduction benefits and time-saving advantages similar to the U frame series. It also provides comparable design flexibility. The two companion insert molds for H frames can be changed independently and individually. A dummy insert is supplied for single insert mold production. This results in exceptional versatility for tailoring schedules to virtually all inventory requirements including just-in-time delivery. H frames also offer special advantages for high volume production. Two insert molds permit doubling quantities for each molding cycle. Also, there is virtually no need to interrupt production for maintenance or repair since inexpensive backup insert molds can be quickly installed. H frames are supplied with hardened center runner bars and replaceable sprue puller pin assemblies. Each frame includes a locking locating ring and an integral master ejector plate with cutouts to allow installation of insert mold pillar posts. The master ejector plate is also supplied with positive aligning guide posts, bushings and grease fittings for a guided ejector system. Options include interlocking ejector rails to lock the insert mold’s ejector system to the master ejector plate. The master ejector plate can be spring loaded for returning the insert mold’s ejector system. It can also be tied to the machine’s hydraulic knockout system for stroking the insert mold’s ejector assembly. Other options include water lines in the center bar or other locations, insulation boards, runner shutoffs and hot sprue bushings. Frame spacer bars to accommodate shorter, more economical companion insert molds are available for frames designed for longer sizes. Additional retainer slots and a spacer plate in the frame’s cavity half allow the frame to accept insert molds with different thicknesses. Quick-Change Hot Runner Molding All of the advantages of the MUD Quick-Change Concept can be added to a hot runner molding system with the addition of a manifold to the H frame. Both the frame and the hot runner system remain in the molding machine. Only the insert molds are changed to produce new parts, just as in other Quick-Change applications. This means faster changeovers, lower tooling costs and greater scheduling flexibility for hot runner molding. Steel specifications: Standard frames are produced in prehard steel (285-325 Brinell) with hardened center sections. Frames are also available in prehard stainless, 420 stainless, H-13 and other grades on request. Armorclad* Number One can be specified. * “Armorclad” is a registered trademark of Armorclad, Inc. Quick-Change H frame options • Spring-loaded master ejector plates • Interlocking ejector rails • Additional height on ejector rails • Early return on ejector system • Special knockout hole locations • Runner shutoffs • Choice of runner configuration • Frame spacer bars • Insulation boards • Additional retainer slot and spacer plate • Extended loading rails • Water lines for center sections • Water lines for rails and plates • Machining for cartridge heaters • Manifold for hot runner operation • Hot sprue bushings • Armorclad plating* • Electroless nickel plating * “Armorclad” is a registered trademark of Armorclad, Inc. NOTE: Specifications subject to change without prior notice. hframe_v23 7/25/05 3:02 PM Page 4
HF5 Companion insert mold features and applications Standard style companion insert molds for H frames are available in solid or laminated construction and include three- and four-plate designs Insert mold options include machining for stripper plates, sleeve ejection, Companion return pins and pillar posts. Machining for cartridge heater holes, water lines, taper locks, rough and finished custom pockets and other special insert mold options applications is available e Solid or laminated construction Design options for insert molds include spring loading, early return, Stripper plates unscrewing mechanisms, hot runner molding and machining for cam slides Interlocking ejector plates Insert molds can be ordered with interlocking ejector plates for positive Return pins return and stroking action when used with frames having an interlocking ejector system. Pillar posts ● Sleeve ejection Steel Specifications: Companion insert molds are available in 1020, 4130 prehard, P-20 prehard and H-13. 420 stainless and other grades Machining for taper locks are available on request. Armorclad* Number One can be specified Machining for cartridge heater holes Armorclad" is a registered trademark of Armorclad, Inc Machining for water lines Finished custom pockets Machining for special applications *"Armorclad"is a registered trademark of rmorclad. Inc NOTE: Specifications subject to change without pnor notce. U.S.80o-626-6653m dme. net MASTER Canada800-387-6600 Europe32-15-215011 UNIT DE
U.S. 800-626-6653 ■ www.dme.net Canada 800-387-6600 ■ Europe 32-15-215011 HF 5 Companion insert mold features and applications Standard style companion insert molds for H frames are available in solid or laminated construction and include three- and four-plate designs. Insert mold options include machining for stripper plates, sleeve ejection, return pins and pillar posts. Machining for cartridge heater holes, water lines, taper locks, rough and finished custom pockets and other special applications is available. Design options for insert molds include spring loading, early return, unscrewing mechanisms, hot runner molding and machining for cam slides. Insert molds can be ordered with interlocking ejector plates for positive return and stroking action when used with frames having an interlocking ejector system. Steel Specifications: Companion insert molds are available in 1020, 4130 prehard, P-20 prehard and H-13. 420 stainless and other grades are available on request. Armorclad* Number One can be specified. * “Armorclad” is a registered trademark of Armorclad, Inc. Companion insert mold options • Solid or laminated construction • Stripper plates • Interlocking ejector plates • Return pins • Pillar posts • Sleeve ejection • Machining for taper locks • Machining for cartridge heater holes • Machining for water lines • Rough cut pockets • Finished custom pockets • Machining for special applications • Armorclad plating* * “Armorclad” is a registered trademark of Armorclad, Inc. NOTE: Specifications subject to change without prior notice. hframe_v23 7/25/05 3:02 PM Page 5
HF 6 07/07 HF HF Quick-Change H-Style Frame Companion Ear Plates 13 03/8-16 handling holes supplied standard as shown. 2 3.500 311/8 diameter knockout supplied standard at center. ④ ation standard as shown. S Locking locating ring supplied standard as shown “H" Style Guick-ChangeTM Frame 3775 ITEMNO.AB 3/8X5°Lead 07/07HF 07/07HF32318771877 07/07HF32423771877 218 020c12 Ordering and installing information 3.150 plates can be found in the front of UC3816 RUNNER- 185 3/8=16THD See introduction for standard and optional frame features. Companion Interchangeable Insert Molds O Frame clamps at this end of insert mold and ejector plates are flush with this end Standard solid Construction 2 Support post not supplied. Grind +001 to +002 higher than height of ejection (see page HF 36). 3 Thicker plate optional (quotation on request) ITEM NO dard Solid Standard Laminated 0707SSH22318771877 x3.15 3.25X3.15 0707SSH22423771.877 3.598 tandard Laminated Construction ITEM NO 07/07SLH2811377087708771377 07/07SLH2821877137708771377 07/07SLH283187713713771877 07/07SLH284237718771371877 Central Central 1.375 Ejection .375 Ejection MASTER U.S.800-626-6653 UNIT DE Canada 800-387-6600- Europe 32-15-215011
ITEM NO. A B 07/07 SSH 221 1.377 1.377 07/07 SSH 222 1.877 1.377 07/07 SSH 223 1.877 1.877 07/07 SSH 224 2.377 1.877 Standard Solid Construction ITEM NO. A B 07/07 HF 321 1.377 1.377 07/07 HF 322 1.877 1.377 07/07 HF 323 1.877 1.877 07/07 HF 324 2.377 1.877 1 Frame clamps at this end of insert mold and ejector plates are flush with this end. 2 Support post not supplied. Grind +.001 to +.002 higher than height of ejection (see page HF 36). 3 Thicker plate optional (quotation on request). “H” Style Quick-Change™ Frame 3.500 3/8 x 5° Lead 3.000 2.88 7.55 3.775 3.150 1.250 OFFSET 2.900 3.025 1 2 3 4 7.00 1.37 R Ø O .88 2.50 .12 1.75 Ordering and installing information for H frame and companion ear plates can be found in the front of this brochure. See introduction for standard and optional frame features. Ejector Half .375 3.00 3.150 .500 Offset 3.248 3.598 ±.001 .375 1.375 Ejection 2.75 Central .175 A .184 Ø .250 B .240 .240 B2 A2 1 2 3 Ejector Half .375 3.00 3.150 .500 Offset 3.248 3.598 ±.001 .375 1 1.375 Ejection 2.75 Central .175 A .184 Ø .250 B .240 .240 2 3 Standard Solid: 3.25 x 3.15 Standard Laminated: 3.25 x 3.15 Companion Interchangeable Insert Molds 5 Ø S .218 Ø 2.0 Ø .50 .75 3.252 +.002 –.000 .125 ±.001 A UC 3816 .50 .50 .185 3/8-16 THD RUNNER .81 .50 2.06 .06 .190 B ±.0005 .125 .62 .75 .88 .36 2.87 2.25 1.375 HF Quick-Change H-Style Frame & Companion Ear Plates 07/07 HF U.S. 800-626-6653 ■ www.dme.net Canada 800-387-6600 ■ Europe 32-15-215011 HF 6 1 3/8-16 handling holes supplied standard as shown. 2 Cutout in ejector plate to accommodate pillar post supplied standard as shown. 3 1 1/8 diameter knockout supplied standard at center. 4 1/2-13 at knockout location standard as shown. 5 Locking locating ring supplied standard as shown. ITEM NO. A A2 B2 B 07/07 SLH 281 1.377 0.877 0.877 1.377 07/07 SLH 282 1.877 1.377 0.877 1.377 07/07 SLH 283 1.877 1.377 1.377 1.877 07/07 SLH 284 2.377 1.877 1.377 1.877 Standard Laminated Construction hframe_v23 7/25/05 3:02 PM Page 6
HF 7 HF Quick-Change H-style 08/09HF Frame Companion Ear Plates (12-13 handling holes supplied standard as shown. @ Waterlines in center sections optional (quotation on request) 3 cutout in ejector plate to accommodate pillar post supplie 411/8 diameter knockouts supplied standard at center. 6 12-13 at knockout location standard as shown 6 Positive ejector plate guidance O Locking locating ring supplied standard as shown. Guick-ChangeTM Frame 08/09HF3211.8771.377 08/09HF3221.8771.877 08/09HF32323771.877 Ordering and installing information for H frame and companion ear 0200土 plates can be found in the front of 3.500 Uc3816 See introduction for standard and optional frame features. RUNNER. 248 38-16THD Companion Interchangeable Insert Molds O Frame clamps at this end of insert mold and ejector plates are flush with this end of insert. 2 Support post not supplied Grind +001 to + 002 higher than height of ejection (see page HF 36) 3 Thicker plate optional (quotation on request). Standard solid Construction Standard Solid: Standard Laminated 5.0x3.5 5.0x3.5 ITEM NO 08/09SSH22118771.377 /09sSH22218771877 0809SSH22323771877 Ejector 3.500 5456 Standard Laminated Construction ITEM NI 08/09SLH2811877087708771377 809SLH2821877087708771.877 B20809SLH28323771370871877 名 2.625 Ejection -2 625 Ejection U.S.80o-626-6653m dme. net MASTER Canada800-387-6600 Europe32-15-215011 UNIT DE
U.S. 800-626-6653 ■ www.dme.net Canada 800-387-6600 ■ Europe 32-15-215011 4.000 3/8 x 5° Lead 3.375 4.25 8.88 4.437 3.500 3.25 1.874 OFFSET 3.187 3.312 1 2 4 5 8.00 1.75 1.25 2.250 .12 3.50 3 .969 2.88 R Ø O 7 Ø S .218 Ø 2.0 Ø .75 .75 5.000 +.002 –.000 .125±.001 A UC 3816 .50 .50 3/8-16 THD B ±.0005 RUNNER .248 .81 .50 1.31 .06 .125 .253 .75 .62 .75 .36 4.12 3.38 2.625 6 Ordering and installing information for H frame and companion ear plates can be found in the front of this brochure. See introduction for standard and optional frame features. 1 1/2-13 handling holes supplied standard as shown. 2 Waterlines in center sections optional (quotation on request). 3 Cutout in ejector plate to accommodate pillar post supplied standard as shown. 4 1 1/8 diameter knockouts supplied standard at center. 5 1/2-13 at knockout location standard as shown. 6 Positive ejector plate guidance. 7 Locking locating ring supplied standard as shown. ITEM NO. A B 08/09 HF 321 1.877 1.377 08/09 HF 322 1.877 1.877 08/09 HF 323 2.377 1.877 “H” Style Quick-Change™ Frame ITEM NO. A B 08/09 SSH 221 1.877 1.377 08/09 SSH 222 1.877 1.877 08/09 SSH 223 2.377 1.877 Standard Solid Construction ITEM NO. A A2 B2 B 08/09 SLH 281 1.877 0.877 0.877 1.377 08/09 SLH 282 1.877 0.877 0.877 1.877 08/09 SLH 283 2.377 1.377 0.877 1.877 Standard Laminated Construction Ejector Half .437 3.00 3.500 .562 Offset 4.996 5.456 ±.001 .437 2.625 Ejection 4.00 Central .230 A .246 Ø .375 B .360 .360 B2 A2 1 2 3 Ejector Half .437 3.00 3.500 .562 Offset 4.996 5.456 ±.001 .437 2.625 Ejection 4.00 Central .230 A .246 Ø .375 B .360 .360 1 2 3 Standard Solid: 5.0 x 3.5 1 Frame clamps at this end of insert mold and ejector plates are flush with this end of insert. 2 Support post not supplied. Grind +.001 to +.002 higher than height of ejection (see page HF 36). 3 Thicker plate optional (quotation on request). Companion Interchangeable Insert Molds HF Quick-Change H-Style 08/09 HF Frame & Companion Ear Plates Standard Laminated: 5.0 x 3.5 HF 7 hframe_v23 7/25/05 3:02 PM Page 7
HF 8 10/12 HF HF Quick-Change H-Style Frame Companion Ear Plates (5/8-11 handling holes supplied standard as shown. 2 Ejector system designed for spring loading (quotation on request) 3 Waterlines in center sections optional (quotation on request) 4 cutout in ejector plate to accommodate pillar post supplied 511/8 diameter knockouts supplied standard at center and 3.50 off center. 61/2-13 at knockout location standard as shown. O Positive ejector plate guidance Locking locating ring supplied standard as shown. " H"St Guick-ChangeTM Frame 1188 ITEMNO.AB 1012HF32318772377 10/12HF324 10/12HF32523772377 司c Ordering and installing information plates can be found in the front of See introduction for standard and Companion Interchangeable Insert Molds O Frame clamps at this end of insert mold and ejector plates are flush with this end of insert 2 Support post not supplied. Grind +001 to +002 higher than height of ejection (see page HF 36). Standard solid Construction 3 Thicker plate optional (quotation on request) ITEM NO 0/12SSH221 Standard Solid: Standard Laminated 1012sH22318772377 5.0x5.0 5.0x5.0 10/12SSH22523772377 5000 5.000 5.456 Standard Laminated Construction 0/12SLH2811877087708771377 0/12SLH2821877087708771.877 10/12SLH2831.87708771372377 10/12SLH2842377137708771877 10/12SLH28523771.3771.377237 3.750 Ejection ton MASTER U.S.800-626-6653 UNIT DE Canada 800-387-6600- Europe 32-15-215011
ITEM NO. A B 10/12 SSH 221 1.877 1.377 10/12 SSH 222 1.877 1.877 10/12 SSH 223 1.877 2.377 10/12 SSH 224 2.377 1.877 10/12 SSH 225 2.377 2.377 Standard Solid Construction Ordering and installing information for H frame and companion ear plates can be found in the front of this brochure. See introduction for standard and optional frame features. ITEM NO. A B 10/12 HF 321 1.877 1.377 10/12 HF 322 1.877 1.877 10/12 HF 323 1.877 2.377 10/12 HF 324 2.377 1.877 10/12 HF 325 2.377 2.377 1 Frame clamps at this end of insert mold and ejector plates are flush with this end of insert. 2 Support post not supplied. Grind +.001 to +.002 higher than height of ejection (see page HF 36). 3 Thicker plate optional (quotation on request). “H” Style Quick-Change™ Frame 4.937 3/8 x 5° Lead 3.687 4.25 11.88 5.937 5.000 4.62 1.874 OFFSET 4.437 4.562 1 5 6 9.88 2.00 2.00 3.000 1.88 .12 3.00 4 1.375 1.25 3.50 2 3 1.12 R Ø O Ejector Half .437 4.50 5.000 .562 Offset 4.996 5.456 ±.001 .437 .230 A .246 Ø .375 3.750 Ejection 4.00 Central B .360 .360 B2 A2 1 2 3 Ejector Half .437 4.50 5.000 .562 Offset 4.996 5.456 ±.001 .437 .230 A .246 Ø .375 3.750 Ejection 4.00 Central B .360 .360 1 2 3 Standard Solid: 5.0 x 5.0 Standard Laminated: 5.0 x 5.0 Companion Interchangeable Insert Molds 1 5/8-11 handling holes supplied standard as shown. 2 Ejector system designed for spring loading (quotation on request). 3 Waterlines in center sections optional (quotation on request). 4 Cutout in ejector plate to accommodate pillar post supplied standard as shown. 5 1 1/8 diameter knockouts supplied standard at center and 3.50 off center. 6 1/2-13 at knockout location standard as shown. 7 Positive ejector plate guidance. 8 Locking locating ring supplied standard as shown. 8 Ø S .218 Ø 2.0 Ø .75 .90 5.000 +.002 –.000 .275 ±.001 A UC 3816 .50 .50 3/8-16 THD B ±.0005 .248 RUNNER .81 .50 1.88 .12 .125 .253 .90 .88 1.00 .36 5.65 4.75 3.750 7 HF Quick-Change H-Style Frame & Companion Ear Plates 10/12 HF U.S. 800-626-6653 ■ www.dme.net Canada 800-387-6600 ■ Europe 32-15-215011 HF 8 ITEM NO. A A2 B2 B 10/12 SLH 281 1.877 0.877 0.877 1.377 10/12 SLH 282 1.877 0.877 0.877 1.877 10/12 SLH 283 1.877 0.877 1.377 2.377 10/12 SLH 284 2.377 1.377 0.877 1.877 10/12 SLH 285 2.377 1.377 1.377 2.377 Standard Laminated Construction hframe_v23 7/25/05 3:02 PM Page 8
HF 9 HF Quick-Change H-style 10/18HF Frame Companion Ear Plates 03/4-10 handling holes supplied standard as shown 2 Ejector system designed for spring loading (quotation on request) 3 Waterlines in ns optional (quotation on request) 5118 diameter knockouts supplied standard at center and 3.50 off center. Locking locating ring supplied standard as shown. Guick-ChangeTM Frame 1018HF32118771377 10/18HF3221.8771.877 3/8x5°Lead 10/18HF32318772377 10/18HF32423771877 1018HF32523772377 10/18HF3262377 877 1018HF32728772377 10/18HF32828772877 0 Ordering and installing information manton ear 3/8-16THD ound in the front of See introduction for standard and Companion Interchangeable Insert Molds O Frame clamps at this end of insert mold and ejector plates are flush with this end of insert. 2 Support post not supplied Grind +001 to + 002 higher than height of ejection (see page HF 36) 3 Thicker plate optional (quotation on request). Standard Solid Construction ITEM NO Standard Solid Standard Laminated 10/18SH2118771377 5.0x8.0 5.0x8.0 10/8SSH22218771877 10/8ssH221877237 10/18SSH22423771877 1018s52252372377 10/8SsH22623772877 10/18sH22728772377 10/18 SSH 2877287 Offset Standard Laminated Construction ITEM NO 18SLH2811.8770.8770.8771377 10/18SLH282187708770.8771.87 10/18SsLH283187708771.3772377 8SLH2842377 1018SH25237713713772377 /18SLH2862371.3771.8772877 1018sLH2872871871377237 10/18SLH2882871.87718772877 3.750 Ejection 3.750 Ejection U.S.80o-626-6653m dme. net MASTER Canada800-387-6600 Europe32-15-215011 UNIT DE
U.S. 800-626-6653 ■ www.dme.net Canada 800-387-6600 ■ Europe 32-15-215011 4.937 3/8 x 5° Lead 3.812 4.25 17.88 8.937 7.62 8.000 1.874 OFFSET 7.437 7.562 1 5 6 9.88 2.00 3.00 3.000 4.88 3.00 .12 4 3 3.50 2 R Ø O 8 Ø S .218 Ø 2.0 Ø 1.00 .90 5.000 +.002 –.000 .275 ±.001 A UC 3816 .50 .50 3/8-16 THD B ±.0005 .248 RUNNER .81 .50 1.88 .12 .125 .253 .90 .88 1.00 .36 5.65 4.75 3.750 7 Ordering and installing information for H frame and companion ear plates can be found in the front of this brochure. See introduction for standard and optional frame features. ITEM NO. A B 10/18 HF 321 1.877 1.377 10/18 HF 322 1.877 1.877 10/18 HF 323 1.877 2.377 10/18 HF 324 2.377 1.877 10/18 HF 325 2.377 2.377 10/18 HF 326 2.377 2.877 10/18 HF 327 2.877 2.377 10/18 HF 328 2.877 2.877 “H” Style Quick-Change™ Frame ITEM NO. A B 10/18 SSH 221 1.877 1.377 10/18 SSH 222 1.877 1.877 10/18 SSH 223 1.877 2.377 10/18 SSH 224 2.377 1.877 10/18 SSH 225 2.377 2.377 10/18 SSH 226 2.377 2.877 10/18 SSH 227 2.877 2.377 10/18 SSH 228 2.877 2.877 Standard Solid Construction ITEM NO. A A2 B2 B 10/18 SLH 281 1.877 0.877 0.877 1.377 10/18 SLH 282 1.877 0.877 0.877 1.877 10/18 SLH 283 1.877 0.877 1.377 2.377 10/18 SLH 284 2.377 1.377 0.877 1.877 10/18 SLH 285 2.377 1.377 1.377 2.377 10/18 SLH 286 2.377 1.377 1.877 2.877 10/18 SLH 287 2.877 1.877 1.377 2.377 10/18 SLH 288 2.877 1.877 1.877 2.877 Standard Laminated Construction Ejector Half .437 7.50 8.000 .562 Offset 4.996 5.456 ±.001 .437 .230 A .246 Ø .375 3.750 Ejection 4.00 Central B .360 .360 B2 A2 1 2 3 Ejector Half .437 7.50 8.000 .562 Offset 4.996 5.456 ±.001 .437 .230 A .246 Ø .375 3.750 Ejection 4.00 Central B .360 .360 1 2 3 Standard Solid: 5.0 x 8.0 Standard Laminated: 5.0 x 8.0 1 Frame clamps at this end of insert mold and ejector plates are flush with this end of insert. 2 Support post not supplied. Grind +.001 to +.002 higher than height of ejection (see page HF 36). 3 Thicker plate optional (quotation on request). Companion Interchangeable Insert Molds HF Quick-Change H-Style Frame & Companion Ear Plates 1 3/4-10 handling holes supplied standard as shown. 2 Ejector system designed for spring loading (quotation on request). 3 Waterlines in center sections optional (quotation on request). 4 Cutout in ejector plate to accommodate pillar post supplied standard as shown. 5 1 1/8 diameter knockouts supplied standard at center and 3.50 off center. 6 1/2-13 at knockout location standard as shown. 7 Positive ejector plate guidance. 8 Locking locating ring supplied standard as shown. 10/18 HF HF 9 hframe_v23 7/25/05 3:02 PM Page 9
HF 10 11/14 HF HF Quick-Change H-Style Frame Companion Ear Plates (5/8-11 handling holes supplied standard as shown. 2 Ejector system designed for spring loading (quotation on request) 3 Waterlines in center sections optional (quotation on request) o Cutout in ejector plate to accommodate pillar post supplied 611/8 diameter knockouts supplied standard at center and 3.50 off center 012-13 at knockout location standard as shown. (8 Locking locating ring supplied standard as shown. H" Style Guick-ChangeTM Frame ITEM NO 34x5°288 11/4HF3211.8771377 11/4HF32218771.877 11/4HF32323771877 525375 14HF3252877237 1.874 100 plates can be found in the front of RUNNE 16 THD See introduction for standard and Companion Interchangeable Insert Molds 0 Frame clamps at this end of insert mold and ejector plates are flush with this end of insert Standard solid Construction 2 Support post not supplied Grind + 001 to +002 higher than height of ejection (see page HF 36). 3 Thicker plate optional (quotation on request) ITEM NO 1/14SSH2211.8771 Standard Solid Standard Laminated 4ssH22323771.87 6.0x6.0 60x6.0 114522528772377 11/4SsH22628772877 6000 6.456 Standard Laminated Construction ITEM NO 114SLH2821.877087708771.877 11/4SLH2832377137708771877 114SH2842377137713772377 50 11/4SLH2852877187713772377 11/4SLH2862877187718772877 3.750 Ejection -3.750 Ejection MASTER U.S.800-626-6653 UNIT DE Canada 800-387-6600- Europe 32-15-215011
HF Quick-Change H-Style Frame & Companion Ear Plates 11/14 HF U.S. 800-626-6653 ■ www.dme.net Canada 800-387-6600 ■ Europe 32-15-215011 HF 10 4 5.25 3.75 1.375 3.000 1.25 5.62 2.88 3.50 6.000 1.874 1.12 2 3 3/4 x 5° Lead .12 OFFSET 5.437 5.562 10.88 5.437 4.312 2.00 6.937 13.88 3.00 1 Ø 0 R 5 6 ITEM NO. A B 11/14 SSH 221 1.877 1.377 11/14 SSH 222 1.877 1.877 11/14 SSH 223 2.377 1.877 11/14 SSH 224 2.377 2.377 11/14 SSH 225 2.877 2.377 11/14 SSH 226 2.877 2.877 Standard Solid Construction Ordering and installing information for H frame and companion ear plates can be found in the front of this brochure. See introduction for standard and optional frame features. ITEM NO. A A2 B2 B 11/14 SLH 282 1.877 0.877 0.877 1.877 11/14 SLH 283 2.377 1.377 0.877 1.877 11/14 SLH 284 2.377 1.377 1.377 2.377 11/14 SLH 285 2.877 1.877 1.377 2.377 11/14 SLH 286 2.877 1.877 1.877 2.877 Standard Laminated Construction ITEM NO. A B 11/14 HF 321 1.877 1.377 11/14 HF 322 1.877 1.877 11/14 HF 323 2.377 1.877 11/14 HF 324 2.377 2.377 11/14 HF 325 2.877 2.377 11/14 HF 326 2.877 2.877 Ejector Half .687 Offset .562 6.000 .562 ±.001 5.996 6.456 5.50 A A2 Ø .500 .230 1.00 .307 5.00 Central 1.00 B .360 .360 3.750 Ejection B2 1 2 3 Ejector Half .687 Offset .562 6.000 .562 ±.001 5.996 6.456 5.50 A Ø .500 .230 .307 5.00 Central B .360 .360 3.750 Ejection 1 2 3 Standard Solid: 6.0 x 6.0 Standard Laminated: 6.0 x 6.0 1 Frame clamps at this end of insert mold and ejector plates are flush with this end of insert. 2 Support post not supplied. Grind +.001 to +.002 higher than height of ejection (see page HF 36). 3 Thicker plate optional (quotation on request). Companion Interchangeable Insert Molds 1 5/8-11 handling holes supplied standard as shown. 2 Ejector system designed for spring loading (quotation on request). 3 Waterlines in center sections optional (quotation on request). 4 Cutout in ejector plate to accommodate pillar post supplied standard as shown. 5 1 1/8 diameter knockouts supplied standard at center and 3.50 off center. 6 1/2-13 at knockout location standard as shown. 7 Positive ejector plate guidance. 8 Locking locating ring supplied standard as shown. “H” Style Quick-Change™ Frame Ø S Ø 2.0 6.000 +.002 –.000 .50 A Ø 1.00 .50 .218 .275 .90 ±.001 UC 3816 8 RUNNER 3/8-16 THD .81 .248 .50 1.88 .12 .312 .90 5.90 5.00 B .125 1.12 1.25 .36 ±.0005 3.750 7 hframe_v23 7/25/05 3:02 PM Page 10