Wireshark Lab:DNS v6.01 Computer Networking Supplement to Computer Networking:A Top-Down A Top-Down Acproe Approach,6 ed..J.F.Kurose and K.W.Ross ne KUROSE ROSS 2005-21012.J.F Kurose and K.W.Ross,All Rights Reserved As described in Section 2.5 of the text',the Domain Name System(DNS)translates hostnames to IP addresses,fulfilling a critical role in the Internet infrastructure.In this lab,we'll take a closer look at the client side of DNS.Recall that the client's role in the DNS is relatively simple-a client sends a query to its local DNS server,and receives a der ehoe DNs ehetere DN comm ate with e ch other to either recu sively or iteratively resolve the client's DNS m the dns clie 's stat int ho the pro col is a query mulat the local DNS server and a response is rece that server. hefore beginning this lab.you ll probably want to revie DNS byN etoo Teord mths TypE nol 1.nslookup In this lab.we'll make extensive use of the nslookup tool.which is available in most Linux/Unix and Microsoft platforms today.To run nslookup in Linux/Unix,you just type the nslooku com nand on the c nand line.To run it in Windows,open the C mma Prompt and ru okup on the mand line operation,allows the hos t running the tool to reer any or a record. erver can be a root D om erver,or an rmediate ns of th ese terms).Io accomp ish this task. nslookup sends a DNS query to the specified DNS server,receives a DNS reply from that same DNS server,and displays the result
Wireshark Lab: DNS v6.01 Supplement to Computer Networking: A Top-Down Approach, 6th ed., J.F. Kurose and K.W. Ross “Tell me and I forget. Show me and I remember. Involve me and I understand.” Chinese proverb © 2005-21012, J.F Kurose and K.W. Ross, All Rights Reserved As described in Section 2.5 of the text1 , the Domain Name System (DNS) translates hostnames to IP addresses, fulfilling a critical role in the Internet infrastructure. In this lab, we’ll take a closer look at the client side of DNS. Recall that the client’s role in the DNS is relatively simple – a client sends a query to its local DNS server, and receives a response back. As shown in Figures 2.21 and 2.22 in the textbook, much can go on “under the covers,” invisible to the DNS clients, as the hierarchical DNS servers communicate with each other to either recursively or iteratively resolve the client’s DNS query. From the DNS client’s standpoint, however, the protocol is quite simple – a query is formulated to the local DNS server and a response is received from that server. Before beginning this lab, you’ll probably want to review DNS by reading Section 2.5 of the text. In particular, you may want to review the material on local DNS servers, DNS caching, DNS records and messages, and the TYPE field in the DNS record. 1. nslookup In this lab, we’ll make extensive use of the nslookup tool, which is available in most Linux/Unix and Microsoft platforms today. To run nslookup in Linux/Unix, you just type the nslookup command on the command line. To run it in Windows, open the Command Prompt and run nslookup on the command line. In it is most basic operation, nslookup tool allows the host running the tool to query any specified DNS server for a DNS record. The queried DNS server can be a root DNS server, a top-level-domain DNS server, an authoritative DNS server, or an intermediate DNS server (see the textbook for definitions of these terms). To accomplish this task, nslookup sends a DNS query to the specified DNS server, receives a DNS reply from that same DNS server, and displays the result. 1 References to figures and sections are for the 6th edition of our text, Computer Networks, A Top-down Approach, 6th ed., J.F. Kurose and K.W. Ross, Addison-Wesley/Pearson, 2012
G☒Command Prompt 可 Address:"Yw:9z8智 ”器a 出监招 加syn The above scre hot shows the results of three independent (displayed in the mand Prompt)In s located on the campus of Po chnic Universityn y DNS server ng ns kup,if noI Sserver is specified,then slookup sen ds the the default whichin prime.poly.edu.Consider the first command: nslookup www.mit.edu In words,this command is saying"please send me the IP address for the host www.mit.edu".As shown in the screenshot,the response from this command provides two pieces of information:(1)the name and IP address of the DNS server that provides the answer;and(2)the answer itself,which is the host name and IP address of www.mit.edu.Although the response came from the local DNS server at Polytechnic University,it is quite possible that this local DNS server iteratively contacted several other DNS servers to get the answer,as described in Section 2.5 of the textbook. Now consider the second command: nslookup -type=Ns mit.edu In this example,we ha e provided the option -type NS and the main causes nslookup to send a query for a type-NS record to the default loca
The above screenshot shows the results of three independent nslookup commands (displayed in the Windows Command Prompt). In this example, the client host is located on the campus of Polytechnic University in Brooklyn, where the default local DNS server is dns-prime.poly.edu. When running nslookup, if no DNS server is specified, then nslookup sends the query to the default DNS server, which in this case is dnsprime.poly.edu. Consider the first command: nslookup www.mit.edu In words, this command is saying “please send me the IP address for the host www.mit.edu”. As shown in the screenshot, the response from this command provides two pieces of information: (1) the name and IP address of the DNS server that provides the answer; and (2) the answer itself, which is the host name and IP address of www.mit.edu. Although the response came from the local DNS server at Polytechnic University, it is quite possible that this local DNS server iteratively contacted several other DNS servers to get the answer, as described in Section 2.5 of the textbook. Now consider the second command: nslookup –type=NS mit.edu In this example, we have provided the option “-type=NS” and the domain “mit.edu”. This causes nslookup to send a query for a type-NS record to the default local DNS server. In
words,the query is saying."please send me the host names of the authoritative DNS for mit.edu".(When the-type option is not used,nslookup uses the default,which is to query for type A records.)The answer,displayed in the above screenshot,first indicates the DNS server that is providing the answer(which is the default local DNS server)along with three MIT nameservers.Each of these servers is indeed an authoritative DNS server for the hosts on the mIT campus.However.nslookuD also indicates that the answer is non-authoritative."meaning that this answer came from the cache of some server rather than from an authoritative MIT DNS server.Finally,the answer also includes the IP addresses of the authoritative DNS servers at MIT.(Even though the type-NS query generated did not explicitly ask for the IP addresses,the local DNS erver returned these" for free ”and nslo okup displays the result.) Now finally consider the third command: nslookup www.aiit.or.kr bitsy.mit.edu In this example,we indicate that we want to the query sent to the DNS server bitsy.mit.edu rather than to the default DNS server(dns-prime.poly.edu).Thus,the query and reply transaction takes place directly between our querying host and bitsy.mit.edu.In this example,the DNS server bitsy.mit.edu provides the IP address of the host www.aiit.or.kr,which is a web server at the Advanced Institute of Information Technology (in Korea). Now that we have gone through a few illustrative examples,you are perhaps wondering about the general syntax of nslookup commands.The syntax is: nslookup -optionl -option2 host-to-find dns-server two or m ore options.And as we have seen les the dn following (and write down the results) 1.Run nslookup to obtain the IP address of a Web server in Asia.What is the IP address of that server? 2.Run nslookup to determine the authoritative DNS servers for a university in Europe 3.Run nslookup so that one of the DNS servers obtained in Question 2 is queried for the mail servers for Yahoo!mail.What is its IP address? 2.ipconfig ipconfig (for Windows)and ifconfig (for Linux/Unix)are among the most useful little utilities in your host,especially for debugging network issues.Here we'll only describe
words, the query is saying, “please send me the host names of the authoritative DNS for mit.edu”. (When the –type option is not used, nslookup uses the default, which is to query for type A records.) The answer, displayed in the above screenshot, first indicates the DNS server that is providing the answer (which is the default local DNS server) along with three MIT nameservers. Each of these servers is indeed an authoritative DNS server for the hosts on the MIT campus. However, nslookup also indicates that the answer is “non-authoritative,” meaning that this answer came from the cache of some server rather than from an authoritative MIT DNS server. Finally, the answer also includes the IP addresses of the authoritative DNS servers at MIT. (Even though the type-NS query generated by nslookup did not explicitly ask for the IP addresses, the local DNS server returned these “for free” and nslookup displays the result.) Now finally consider the third command: nslookup www.aiit.or.kr bitsy.mit.edu In this example, we indicate that we want to the query sent to the DNS server bitsy.mit.edu rather than to the default DNS server (dns-prime.poly.edu). Thus, the query and reply transaction takes place directly between our querying host and bitsy.mit.edu. In this example, the DNS server bitsy.mit.edu provides the IP address of the host www.aiit.or.kr, which is a web server at the Advanced Institute of Information Technology (in Korea). Now that we have gone through a few illustrative examples, you are perhaps wondering about the general syntax of nslookup commands. The syntax is: nslookup –option1 –option2 host-to-find dns-server In general, nslookup can be run with zero, one, two or more options. And as we have seen in the above examples, the dns-server is optional as well; if it is not supplied, the query is sent to the default local DNS server. Now that we have provided an overview of nslookup, it is time for you to test drive it yourself. Do the following (and write down the results): 1. Run nslookup to obtain the IP address of a Web server in Asia. What is the IP address of that server? 2. Run nslookup to determine the authoritative DNS servers for a university in Europe. 3. Run nslookup so that one of the DNS servers obtained in Question 2 is queried for the mail servers for Yahoo! mail. What is its IP address? 2. ipconfig ipconfig (for Windows) and ifconfig (for Linux/Unix) are among the most useful little utilities in your host, especially for debugging network issues. Here we’ll only describe
ipconfig,although the Linux/Unix ifconfig is very similar.ipconfig can be used to show your current TCP/IP information,including your address,DNS server addresses,adapter type and so on.For example,if you all this information about your host simply by entering ipconfig \all into the Command Prompt,as shown in the following screenshot. Command Prompt 回☒ C:\>ipconfig /all indovs IP Configuration USG11631-ZMMQA6 thernet adapter Local Area Connection: Seaet0pee4 cific DNS Suffix :88-89-6B-18-60-99 29 .onday August 30 2004730:50 Pm ipconfig is also very useful for managing the DNS information stored in your host.In Section 2.5 we learned that a host can cache DNS records it recently obtained.To see these cached records,after the prompt C:\>provide the following command: ipconfig /displaydns Each entry shows the remaining Time to Live (TTL)in seconds.To clear the cache,enter ipconfig /flushdns Flushing the DNS cache clears all entries and reloads the entries from the hosts file
ipconfig, although the Linux/Unix ifconfig is very similar. ipconfig can be used to show your current TCP/IP information, including your address, DNS server addresses, adapter type and so on. For example, if you all this information about your host simply by entering ipconfig \all into the Command Prompt, as shown in the following screenshot. ipconfig is also very useful for managing the DNS information stored in your host. In Section 2.5 we learned that a host can cache DNS records it recently obtained. To see these cached records, after the prompt C:\> provide the following command: ipconfig /displaydns Each entry shows the remaining Time to Live (TTL) in seconds. To clear the cache, enter ipconfig /flushdns Flushing the DNS cache clears all entries and reloads the entries from the hosts file
3.Tracing DNS with Wireshark Now that we are familiar with nslookup and ipconfig.we're ready to get down to some serious business.Let's first capture the DNS packets that are generated by ordinary Web- surfing activity. Use ipconfig to empty the DNS cache in your host. ·Ope r brows cache.(With Internet Explore ternet Options; n in the General tab selec Open Wir eshark and enter"ip.addr=you you obtain your IParith ipontsemv器Cat neither originate nor are destined to your host. Start packet capture in Wireshark. With your browser,visit the Web page:http://www.ietf.org ·Stop packet capture. Ifyou are abe torn Wiresharkonalive can download a packe file tha tured while g the steps aboveo one of th e au hor's comp Answer ering a w.you s ld f the et(s) thin the ace u Ann e u xplain you answer print a pa Print,choose Sele ed only.choos mary line.and select the minimum amount of packet detail that you need to answer the question. 4.Locate the DNS query and response messages.Are then sent over UDP or TCP? 5.What is the destination port for the DNS query message?What is the source port of DNS response message? 6.To what IP address is the DNS query message sent?Use ipconfig to determine the IP address of your local DNS server.Are these two IP addresses the same? 7.Examine the DNS query message.What"Type"of DNS query is it?Does the query message contain any"answers"? 8.Examine the DNS response message.How many"answers"are provided?What do each of these ansy ers contain? wireshark-traces zipand extract the file dns computers while performing the ster ps indicated in the Wireshark lab.Once you have downloaded the trace.you can load it into Wi you've found the ans colored pen)noting what you found in what
3. Tracing DNS with Wireshark Now that we are familiar with nslookup and ipconfig, we’re ready to get down to some serious business. Let’s first capture the DNS packets that are generated by ordinary Websurfing activity. • Use ipconfig to empty the DNS cache in your host. • Open your browser and empty your browser cache. (With Internet Explorer, go to Tools menu and select Internet Options; then in the General tab select Delete Files.) • Open Wireshark and enter “ip.addr == your_IP_address” into the filter, where you obtain your_IP_address with ipconfig. This filter removes all packets that neither originate nor are destined to your host. • Start packet capture in Wireshark. • With your browser, visit the Web page: http://www.ietf.org • Stop packet capture. If you are unable to run Wireshark on a live network connection, you can download a packet trace file that was captured while following the steps above on one of the author’s computers2 . Answer the following questions. Whenever possible, when answering a question below, you should hand in a printout of the packet(s) within the trace that you used to answer the question asked. Annotate the printout3 to explain your answer. To print a packet, use File->Print, choose Selected packet only, choose Packet summary line, and select the minimum amount of packet detail that you need to answer the question. 4. Locate the DNS query and response messages. Are then sent over UDP or TCP? 5. What is the destination port for the DNS query message? What is the source port of DNS response message? 6. To what IP address is the DNS query message sent? Use ipconfig to determine the IP address of your local DNS server. Are these two IP addresses the same? 7. Examine the DNS query message. What “Type” of DNS query is it? Does the query message contain any “answers”? 8. Examine the DNS response message. How many “answers” are provided? What do each of these answers contain? 2 Download the zip file http://gaia.cs.umass.edu/wireshark-labs/wireshark-traces.zipand extract the file dnsethereal-trace-1. The traces in this zip file were collected by Wireshark running on one of the author’s computers, while performing the steps indicated in the Wireshark lab. Once you have downloaded the trace, you can load it into Wireshark and view the trace using the File pull down menu, choosing Open, and then selecting the dns-ethereal-trace-1 trace file. 3 What do we mean by “annotate”? If you hand in a paper copy, please highlight where in the printout you’ve found the answer and add some text (preferably with a colored pen) noting what you found in what you ‘ve highlight. If you hand in an electronic copy, it would be great if you could also highlight and annotate
9.Consider the subsequent TCP SYN packet sent by your host.Does the destination IP address of the SYN packet correspond to any of the IP addresses provided in the DNS response message? 10.This web page contains images.Before retrieving each image,does your host issue new DNS queries? Now let's play with nslookup" Start packet capture .Do an nslookup on www.mit.edu ·Stop packet capture.. You should get a trace that looks something like the following: *n印Catue analse3ss地 tar:3.ad=192.1682145 2145 04228 92,16 145 tandard oery 45 it.edu ,c135w dress) 0000g We see from the above screenshot that actually sent three DNS queries and ceived three DNS responses.For the purpose of this assignment,in answering the following questions,ignore the first two sets of queries/responses,as they are specific to nslookup and are not normally generated by standard Internet applications.You should instead focus on the last query and response messages. If. trace file dns-ethereal-trace-2 in the
9. Consider the subsequent TCP SYN packet sent by your host. Does the destination IP address of the SYN packet correspond to any of the IP addresses provided in the DNS response message? 10. This web page contains images. Before retrieving each image, does your host issue new DNS queries? Now let’s play with nslookup4 . • Start packet capture. • Do an nslookup on www.mit.edu • Stop packet capture. You should get a trace that looks something like the following: We see from the above screenshot that nslookup actually sent three DNS queries and received three DNS responses. For the purpose of this assignment, in answering the following questions, ignore the first two sets of queries/responses, as they are specific to nslookup and are not normally generated by standard Internet applications. You should instead focus on the last query and response messages. 4 If you are unable to run Wireshark and capture a trace file, use the trace file dns-ethereal-trace-2 in the zip file http://gaia.cs.umass.edu/wireshark-labs/wireshark-traces.zip
11.What is the destination port for the DNS query message?What is the source port of DNS response message? 12.To what IP address is the DNS query message sent?Is this the IP address of your default local DNS server? 13.Examine the DNS query message.What"Type"of DNS query is it?Does the query message contain any"answers"? 14.Examine the DNS response message.How many"answers"are provided?What do each of these ansy ers contain? 15.P ovide a screenshot. Now repeat the previous experiment,but instead issue the command nslookup type=NS mit.edu Answer the following questionss 16.To what IP address is the DNS query message sent?Is this the IP address of your default local DNS server? 17.Examine the DNS query message.What"Type"of DNS query is it?Does the me themeWhat Mamrr doe the message provide?Does this response message also provide the IP addresses of the MIT namesers？ 19.Provide a screenshot. Now repeat the previous experiment,but instead issue the command: nslookup www.aiit.or.kr bitsy.mit.edu Answer the following questions" 20.To what sent?Is this the IP address of your server?If the Ip amine the DNS query message rore pded?What xamine the 23.Provide a screenshot. le to run zip file sthe rce filedns-ethereal-racen the
11. What is the destination port for the DNS query message? What is the source port of DNS response message? 12. To what IP address is the DNS query message sent? Is this the IP address of your default local DNS server? 13. Examine the DNS query message. What “Type” of DNS query is it? Does the query message contain any “answers”? 14. Examine the DNS response message. How many “answers” are provided? What do each of these answers contain? 15. Provide a screenshot. Now repeat the previous experiment, but instead issue the command: nslookup –type=NS mit.edu Answer the following questions5 : 16. To what IP address is the DNS query message sent? Is this the IP address of your default local DNS server? 17. Examine the DNS query message. What “Type” of DNS query is it? Does the query message contain any “answers”? 18. Examine the DNS response message. What MIT nameservers does the response message provide? Does this response message also provide the IP addresses of the MIT namesers? 19. Provide a screenshot. Now repeat the previous experiment, but instead issue the command: nslookup www.aiit.or.kr bitsy.mit.edu Answer the following questions6 : 20. To what IP address is the DNS query message sent? Is this the IP address of your default local DNS server? If not, what does the IP address correspond to? 21. Examine the DNS query message. What “Type” of DNS query is it? Does the query message contain any “answers”? 22. Examine the DNS response message. How many “answers” are provided? What does each of these answers contain? 23. Provide a screenshot. 5 If you are unable to run Wireshark and capture a trace file, use the trace file dns-ethereal-trace-3 in the zip file http://gaia.cs.umass.edu/wireshark-labs/wireshark-traces.zip 6 If you are unable to run Wireshark and capture a trace file, use the trace file dns-ethereal-trace-4 in the zip file http://gaia.cs.umass.edu/wireshark-labs/wireshark-traces.zip